Page 1 of 2 12 LastLast
Results 1 to 10 of 16
Like Tree2Likes

Thread: Cleaning your DE

  1. #1
    Member PWillis's Avatar
    Join Date
    Jan 2010
    Location
    Grady Co. OK
    Posts
    44
    Thanked: 1

    Default Cleaning your DE

    Just got my first DE in and its a Merkur 34C HD. My question is how on earth do you keep these things clean?

  2. #2
    Senior Member Muguser's Avatar
    Join Date
    Apr 2010
    Location
    Long Island
    Posts
    119
    Thanked: 15

    Default

    I usually use my sink to give the razor a good "swish" while shaving after each pass. I will just clean it when I change the blade after 3 uses or so to prevent excessive buildup.
    If it is a razor that I bought used, I will use an old toothbrush and some soapy water on it, and then soak it in my sink with a mix of Lysol disinfectant, and hot water for 10 minutes or so.

  3. The Following User Says Thank You to Muguser For This Useful Post:

    PWillis (05-12-2011)

  4. #3
    The Electrochemist PhatMan's Avatar
    Join Date
    Apr 2009
    Location
    Hastings, UK
    Posts
    1,714
    Thanked: 527

    Default

    PWillis,

    With each blade change, give the razor a rub with a micro-fibre cloth - focus attention to under the head plate and the support plate - this will keep the soap scum down.

    Once a week use a general purpose bathroom cleaner spray - I use CIF. In the US you could use 'Scrubbing Bubbles'.

    Spray the razor with the cleaner, let it sit for about 10 - 30 minutes, then scrub gently with an old toothbrush and rinse with hot water.

    You should be good to go

    NOTE : Keep away from 'lime scale remover' types of cleaners as these have phosphoric acid in them.

    Good luck and good shaving !

    Have fun !

    regards

    Russ
    BigJim likes this.

  5. The Following 6 Users Say Thank You to PhatMan For This Useful Post:

    DOOM (05-12-2011), Evilbeejuju (05-14-2011), Obie (05-12-2011), oldsCool (05-12-2011), porridgeorange (05-12-2011), PWillis (05-12-2011)

  6. #4
    Member
    Join Date
    Mar 2011
    Location
    Minneapolis
    Posts
    85
    Thanked: 2

    Default

    I use a denture brush and scrubbing bubbles. The denture brush is bigger then a toothbrush and has firmer bristles then a toothbrush, and has a pointed side to really get into the cracks and crevices.

  7. #5
    Geriatric Gamer/Surf Fisher tonycraigo's Avatar
    Join Date
    Mar 2011
    Location
    Manassas, VA
    Posts
    298
    Thanked: 42

    Default

    On the advise of my dentist, I got one of those Oral B battery operated toothbrushes. When he mentioned it I had visions of a 50 dollar montrosity that would take up half the bathroom, but when I got to the supermarket I saw one when passing by... it's a toothbrush, with a battery... for $6.99!

    I've been using my Dad's 1960 Fat Boy occasionally and I'm getting another one of those new fangled toofer brushes to use on the DE.

  8. #6
    Senior Member Firefighter2's Avatar
    Join Date
    Sep 2010
    Location
    Alberta, Canada
    Posts
    2,145
    Thanked: 218

    Default

    I just use hot water and a corner of paper towel, works fine.

  9. #7
    Well Shaved Gentleman... jhenry's Avatar
    Join Date
    Dec 2009
    Location
    Indianapolis, IN
    Posts
    3,860
    Thanked: 3760

    Default

    When I change the blade on my de I usually fill the bathroom sink with some warm water and baby shampoo and place the components of the disassembled razor in the warm water/baby shampoo solution.

    Let it soak for a minute or two, then scrub the razor's components with an old, soft toothbrush.

    Finally, I rinse the components of the razor under the faucet and dry them with a soft cloth or towel before inserting a brand new blade and reassembling the razor.

    After doing the above, my razor looks and shaves good as new.
    "Age is an issue of mind over matter. If you don't mind, it doesn't matter." Mark Twain

  10. #8
    Senior Member blabbermouth 1OldGI's Avatar
    Join Date
    Aug 2009
    Location
    New Port Richey, FL
    Posts
    3,819
    Thanked: 1184
    Blog Entries
    3

    Default

    +1 on Scrubbing Bubbles. When I used safety razors extensively, after the Sunday shave I'd toss all the razors I had used during the week in the sink and spray them down with Scrubbing Bubbles, when the bubbles were done I'd run a toothbrush around them. Every other week or so I'd dry them off and give them the once over with Never Dull (metal polish)
    The older I get, the better I was

  11. #9
    Red Tip with a Morphine Drip topherloaf's Avatar
    Join Date
    Sep 2009
    Location
    DFW, Republic of Texas
    Posts
    23
    Thanked: 0

    Default

    I use barbicide or a like product from another brand. Mix it was 1/3 water and let the razor soak while you forget about it. Otherwise, I use the aforementioned battery powered toothbrush. Works like a charm.

  12. #10
    Forum mogwai thebigspendur's Avatar
    Join Date
    May 2005
    Location
    New Mexico
    Posts
    28,375
    Thanked: 4593
    Blog Entries
    4

    Default

    To tell you the truth if you're talking your own razor and not some eboy special you just got I really don't worry much about it. Every now and then when it's obvious I'll just use some bathroom cleaner and an old toothbrush and it's as good as new.
    Every day without fail one should consider himself as dead-Tsunetomo

  13. The Following User Says Thank You to thebigspendur For This Useful Post:

    cpcohen1945 (06-08-2011)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •