Page 1 of 2 12 LastLast
Results 1 to 10 of 15
Like Tree3Likes

Thread: Some thoughts

  1. #1
    Member
    Join Date
    Mar 2012
    Location
    Boston, MA
    Posts
    31
    Thanked: 1

    Default Some thoughts

    Finally got around to using proraso preshave cream and then proraso shaving cream for my shave. Man, that stuff was amazing! Cant wait to shave again just so that I can use it again.
    On a side note, I've, gotten better under the neck area but still having trouble. Cant seem to get a close shave there no matter what I try. Stretching the skin in all different directions, changing the angles Im using, using different strokes, but its still stubborn and normally have to go back with the DE to finish up.

  2. #2
    Indisposed
    Join Date
    Oct 2008
    Posts
    6,038
    Thanked: 1195

    Default

    It's likely a combination of technique and razor sharpness. It can be quite frustrating, but until you have stropping down pat your razor is possibly not quite as keen as it could be. Coupled with the fact that the neck area is quite challenging on its own, issues are bound to pop up. Keep at it, I'm sure you'll nail it. Have you considered touching up your razor?

    BTW - I'm a Proraso fan too. If you don't have the aftershave you should definitely pick some up for the ultimate menthol kick. When used with the other products I call it the "All Proraso System"...

  3. The Following User Says Thank You to Ryan82 For This Useful Post:

    pwm5024 (05-18-2012)

  4. #3
    Member
    Join Date
    Mar 2012
    Location
    Boston, MA
    Posts
    31
    Thanked: 1

    Default

    Just started looking into touching up the razor but not sure exactly where to start. At the moment I dont have the budget to buy any stones and not sure what my other options are. I read about barber hones but im not sure where to find one of those. Looking through the forum I also read about green CrOx paste but I have my doubts about this and would much rather prefer a stone or a barbers hone. Any chance you can point me in the right direction?

  5. #4
    Indisposed
    Join Date
    Oct 2008
    Posts
    6,038
    Thanked: 1195

    Default

    Quote Originally Posted by pwm5024 View Post
    Just started looking into touching up the razor but not sure exactly where to start. At the moment I dont have the budget to buy any stones and not sure what my other options are. I read about barber hones but im not sure where to find one of those. Looking through the forum I also read about green CrOx paste but I have my doubts about this and would much rather prefer a stone or a barbers hone. Any chance you can point me in the right direction?
    It would help to know your budget, but it doesn't matter. The cheapest hone would be the barber's variety. They can generally be found in antique shops and flea bay for decent prices (as in under $50, sometimes well under that). They also appear in the SRP classifieds and some of our vendors carry them occasionally as well.

    But don't discount using pastes too. They are the most economical route and can put a wicked sharp edge on a razor. Your best bet would be to make a balsa wood bench strop, which is a strip of balsa, impregnated with a paste such as chromium oxide, diamond spray or Dovo paste, glued to a board. Costs very little and is very effective. You can also paste a hanging strop, but it is much easier to bugger the edge with sub par stropping. The other disadvantage is that you need a dedicated strop for pasting since you can`t remove the paste once it's applied and it should be used sparingly.

  6. The Following User Says Thank You to Ryan82 For This Useful Post:

    mapleleafalumnus (05-21-2012)

  7. #5
    Razor Vulture sharptonn's Avatar
    Join Date
    Oct 2010
    Location
    Lone Star State
    Posts
    25,869
    Thanked: 8588

    Default

    Some of us have a really tough beard, esp the neck hairs. Go with different angle approaches and find out about a "scything stroke". To touch up a shave-worthy razor, you cannot go wrong with a good barber's hone (a Swaty comes to mind) and tons of strop! Realize that some of us never get BBS on our neck. A fact!

  8. The Following User Says Thank You to sharptonn For This Useful Post:

    mapleleafalumnus (05-21-2012)

  9. #6
    Member
    Join Date
    Mar 2012
    Location
    Boston, MA
    Posts
    31
    Thanked: 1

    Default

    Budget wise around $50 give or take, I'm a student so I don't have too much to spend. I also have two strops from straight razor designs, one in the 3" latigo leather and again in the 2" version. I use the 3" most and almost never the 2" so I thought about pasting the 2" strop with the green CrOx. At the moment I dont have any of my tools with at school to make a balsa strop. I think I would be more satisfied with a barbers hone though, not sure why but it just is more appealing to me. Where should I look for barber hones? Not a big fan of ebay and since I dont know too much about them not sure what I should be looking for.

  10. #7
    Razor Vulture sharptonn's Avatar
    Join Date
    Oct 2010
    Location
    Lone Star State
    Posts
    25,869
    Thanked: 8588

    Default

    Lots come up on Ebay. Some bring big prices due to the name on them, not that they are any better than one with, say, Standard on it. To avoid buying one from a seller with no knowledge of them, I could suggest the classifieds here will yield barber's hones from sellers who know the characteristics and condition from experience. With a 50 dollar budget, you should be able to score 2 different ones to try.

  11. The Following User Says Thank You to sharptonn For This Useful Post:

    BarefootGreg (05-25-2012)

  12. #8
    Senior Member mjsorkin's Avatar
    Join Date
    Nov 2006
    Location
    New Jersey
    Posts
    1,139
    Thanked: 173

    Default

    There is an Aloxite on the classifieds now for 25.00. I can't say anything about the hone as I don't really use barber hones.

    Michael

  13. #9
    Member
    Join Date
    Mar 2012
    Location
    Boston, MA
    Posts
    31
    Thanked: 1

    Default

    Thanks for all the help. Spent some time looking though the classifieds and settled on this: Message - Straight Razor Place Classifieds

    I was really drawn to the razor and the hone so pulled the trigger. Can't wait till they get here!

  14. #10
    Vitandi syslight's Avatar
    Join Date
    Jan 2007
    Location
    Scharie County, NY USA
    Posts
    2,761
    Thanked: 224

    Default

    I think you will be very happy with that set

    jim

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •