Page 1 of 2 12 LastLast
Results 1 to 10 of 18
Like Tree1Likes

Thread: Use a sponge to clean razor

  1. #1
    Senior Member
    Join Date
    Aug 2011
    Posts
    111
    Thanked: 8

    Default Use a sponge to clean razor

    As always at least when your starting off, if something goes wrong, there may be many different sources of the problem. So I'm trying to eliminate variables here.

    Before useing a straight, I would fill the sink with water and shake my disposable in the water after a few passes to clean the razor, but for a while after switching to the straight, to avoid possibly hitting the razor on the side of the sink, I would just leave the faucet running to clean the straight after a few passes. Then I saw a video on the internet that shows uses a sponge to clean his straight, which I thought was pretty interesting.

    Now I can't tell you why, but in the beginning shaving with the faucet running and the noise of it, sort of disoriented me and after trying to shave with it off theres just something about the sound of shaving, that cutting hair sound that sort of gives you that extra feedback that your executing the shave right. So I'm set on shaving in silence to get that extra sensory reception.

    Anyways I could just turn the faucet on and off during the shave to clean my razor or use the more convenient way of a simple wipe over the sponge. Now after the first two shaves using the sponge to clean my razor, I've experienced what might be considered razor burn (face was a little red). So I might have been shaving too rough, using to many passes, not stroping good enouph,........but also there might be a dirty sponge imparting something that I'm immediately transferring to my face.

    I clean the sponge every time before I use it and since the beginning I've used a sponge I specifically bought to use as my "razor cleaning sponge." So I was wondering among thoughs that might do this, has there ever been any thoughts, concerns, experineces... in this regard?

  2. #2
    < Banned User >
    Join Date
    Jun 2011
    Location
    miami,fl
    Posts
    577
    Thanked: 69

    Default

    i use a sponge to wipe off the blade.... MOST sponges you buy are anti-bacterial.... if you clean it out and wring it out... and put it somewhere that it will dry and not stay wet you shouldn't have a problem.....

    honestly the issue with the razor burn is probably the same one i have..... being ham *(heavy pressure) handed and the razor needing to be freshened up a bit.....

  3. #3
    Some kind of Zombie BigJim's Avatar
    Join Date
    Feb 2011
    Location
    Le Mars Iowa
    Posts
    1,019
    Thanked: 166

    Default

    Could be a couple things on the razor burn. Many sponges come with built in detergents, particularly to prevent bacteria build up. All of them (unless they're naturals) have some sort of chemical make up, and that could be irritating your face.

    Only you can tell if you're technique is to blame.

    Personally, I rinse the razor with short spurts of water, or I wipe it with my finger. The water doesn't hurt the edge, and the finger I'm careful enough with that I know it doesn't hurt the edge of the blade either. It is possible, however, that your wiping technique on the sponge is degrading your shaving edge and therefore resulting in razor burn.

    Only you can really say.

    Peace,
    Jim

  4. #4
    The Hurdy Gurdy Man thebigspendur's Avatar
    Join Date
    May 2005
    Location
    New Mexico
    Posts
    32,766
    Thanked: 5017
    Blog Entries
    4

    Default

    If your worried about the sponge stop using it and see what happens. You can just wipe the edge on a towel to clean it during and after the shave if your worried about hitting the sink or faucet. Unless you are using some industrial use sponge I doubt that is your issue. You can always buy a natural sponge too. Could be you are dulling the edge on the sponge.
    No matter how many men you kill you can't kill your successor-Emperor Nero

  5. #5
    Junior Member hostage67's Avatar
    Join Date
    Sep 2011
    Posts
    23
    Thanked: 1

    Default

    Instead of using the sponge many people use just a normal towel. You can toss it over your shoulder and wipe your blade on it whenever you need. After it's dirty simply throw it in the wash and grab a new towel.

    As for the burn there are several potential factors as I see it...
    1. Razor Sharpness
    2. Technique
    3. Soap or Cream used
    4. Unknown irritants

    it's possible that #4 could be caused by the sponge, the easiest test is to stop using the sponge to see if you still get the irritation. I have always considered sponges a breeding ground for bacteria so I wouldn't recommend using one, that being said if it's a shaving only sponge it's probably not the actual cause (I still wouldn't use one myself lol). I would say the most likely culprit is that your blade needs a little touch up. Second most likely cause would be the soap or cream you use.

  6. #6
    Senior Member
    Join Date
    Aug 2011
    Posts
    111
    Thanked: 8

    Default

    Well I starting to lean towards not using a sponge. I mean I wouldn't use a sponge from the kitchen. I already use a razor cleaning specific sponge, but just in case I do go through the motions of cleaning it before I use it. And I was actually thinking that even that was possibly making me get a little irritated. The sponge might have a residue of some cleaning agent and that is irritating my skin. Even if it doesn't do anything that act of cleaning it every time is not worth it.

    I like the towel idea, but for reasons I also stopped the sponge method, it might be dulling the blade. I wonder if just a wipe lengthwise, not perpendicular like when shaving, would dull the blade?

    I guess its better to just turn the faucet on every so often. That way your also heating up the blade which I've heard is good.

  7. #7
    Junior Member MNDZA's Avatar
    Join Date
    Sep 2011
    Location
    Chicago
    Posts
    10
    Thanked: 0

    Default

    I noticed in Lynn's DVD, he uses a towel to keep wiping off the blade. I heard that wiping the blade can dull it, but I assume Lynn knows better than most of us and he still does it. I use a very soft paper towel or just water, but I worry about hitting the sink when putting the razor under the faucet each time.

  8. #8
    Senior Member blabbermouth kalerolf's Avatar
    Join Date
    Jan 2010
    Location
    Amsterdam Holland
    Posts
    2,124
    Thanked: 246

    Default

    I use a rubber cup to clean my razor. Works fine and after shaving i rinse him whit wather.
    Last edited by kalerolf; 09-10-2011 at 10:57 AM.

  9. #9
    Senior Member blabbermouth Theseus's Avatar
    Join Date
    Mar 2011
    Location
    Ohio
    Posts
    2,786
    Thanked: 421

    Default

    I use the palm of my hand in a semi-stropping motion to clean the blade.

  10. #10
    Pasted Man Castel33's Avatar
    Join Date
    Jul 2010
    Posts
    1,283
    Thanked: 269

    Default

    Hey knife

    Me I just hit it under the faucet with quick burst. These has multiple effects one it cleans the razor off and two if for some reason you put the blade under the faucet and the lather and hair don't come right off it likely means your lather is to dry. Now as to hitting the faucet with the blade I could see that if you don't give the blade your full attention and we have all at least heard of someone doing it. However to me I am really anal about what I do with the razor from the moment I take it out. So if I am stropping, shaving or rinsing the blade it has my full attention. With that being the case I haven't ever came close to hitting the faucet with any of my razors.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •