Page 1 of 2 12 LastLast
Results 1 to 10 of 13
Like Tree4Likes

Thread: First SR Shave... The Results.

  1. #1
    Member MisterSensitive's Avatar
    Join Date
    Jun 2011
    Location
    Chatsworth, CA
    Posts
    48
    Thanked: 1

    Default First SR Shave... The Results.

    OUUUUUUUUUUUUCHHHHH!

    I just got my Dovo best quality 5/8 razor today and was very excited to try it. The supplier (TSS) assured me that the razor was shave ready and I didn't need to strop it before my first shave. Against my better judgment, and against ALL the advice on this forum, I decided to jump right into a three pass shave. 2 WTG and 1 XTG.

    Surprisingly, I got away with a DFS (in terms of look and feel) and only one or two nicks that went away with cold water. However, the razor TUGGED and PULLED like nothing I've ever shaved with before. I'm a stubborn bastard, so I decided to keep going. I am now sitting at my computer with some of the most horrific razor burn I've ever experienced. Here are two things I'm pretty sure went wrong:

    1. I'm an idiot, and I didn't stop after I felt tugging.
    2. I repeatedly forgot to stretch my skin.

    Even so, when I DID stretch my skin, there was still a fair amount of tugging and pulling. Any advice would be helpful. In the meantime, I'm going to rub ice cream on my face.
    Last edited by MisterSensitive; 06-16-2011 at 06:19 AM. Reason: grammar

  2. #2
    Member Fierce30rus's Avatar
    Join Date
    Nov 2010
    Location
    Astrakhan, Russia
    Posts
    96
    Thanked: 23

    Default

    Hello. Welcome to the world of straight razor.
    Your problem:
    1. probably not sharp razor (check on HHT)
    2. enough experience
    Necessary to prepare the skin. Experiment with hot or cold water.
    Acquiring a good soap and aftershave.
    And most importantly - do not despair.
    Sincerely,
    Alexander
    mjhammer likes this.

  3. The Following User Says Thank You to Fierce30rus For This Useful Post:

    MisterSensitive (06-16-2011)

  4. #3
    Senior Member tfrod's Avatar
    Join Date
    Apr 2011
    Location
    California
    Posts
    151
    Thanked: 24

    Default

    When I first started shaving with a straight I noticed a lot of tugging as well. I started to play with the blade angle and taking short but quick strokes and this helped a lot. Keep practicing and your shaves will improve. Good luck!
    mjhammer likes this.

  5. The Following User Says Thank You to tfrod For This Useful Post:

    MisterSensitive (06-16-2011)

  6. #4
    Member MisterSensitive's Avatar
    Join Date
    Jun 2011
    Location
    Chatsworth, CA
    Posts
    48
    Thanked: 1

    Default

    Thanks for the advice. I think I have my prep down pretty good (although I'm sure there's always room for improvement). I've been shaving with a DE and have gotten some really good shaves out of it. I appreciate the "do not despair" comments as well. It's easy to get discouraged, especially when I had built up in my head that my troubles would all be solved once I got a straight razor. I'm definitely going to give my face a few days to heal and probably only shave WTG with my DE. I'm definitely looking forward to getting good at the art of the straight razor shave.

  7. #5
    Member Fierce30rus's Avatar
    Join Date
    Nov 2010
    Location
    Astrakhan, Russia
    Posts
    96
    Thanked: 23

    Default

    You know, shaving with a straight razor is different from DE. Learn all over anew.
    Learn to relax the arm. Do not push on the razor.
    My first shave was horrible - a dull razor (as I understand it now) and a red neck, chin and cheeks.

    Sincerely,
    Alexander

  8. #6
    Senior Member
    Join Date
    Aug 2010
    Location
    Vancouver, BC, Canada
    Posts
    1,377
    Thanked: 275

    Default

    If you can get a good (comfortable) shave with a DE razor, your prep is probably OK. Especially if you can do an ATG pass with the DE.

    The straight razor needs to be as sharp as a DE blade, and you should be using less pressure with the straight razor. The sharper the razor, the lighter the pressure can be. And the lighter the pressure is, the less razor burn you'll have.

    I have "calibrated" my own "shave-ready" test. If a razor catches and "pops" the hairs on my arm, when I move it about 1/4" above the skin, I find I can shave with it comfortably. If it doesn't, I find that it pulls, tugs, slips, and needs more pressure to cut my beard. That's with _my_ hair; that test may, or may not, work for you.

    However, I'd bet that if your DE blade passes that arm-hair-popping test, and your straight razor fails it:

    . . . the straight razor is not "shave ready".

    Razor angle also has to be right. For a DE razor, that's set by the geometry of the DE razor head, so you have no experience in keeping it correct with a straight razor. It can be a steep learning curve.

    Try stropping the straight razor a lot. 100-200 laps helps, sometimes, with an "almost-sharp" blade. If your stropping technique is good, it won't hurt. I have had good results using a CrOxide pasted strop, but you _can_ overdo that.

    Charles
    gssixgun likes this.

  9. The Following User Says Thank You to cpcohen1945 For This Useful Post:

    EucrisBoy (06-18-2011)

  10. #7
    Senior Member
    Join Date
    May 2011
    Location
    Cowra, New South Wales, Australia
    Posts
    579
    Thanked: 46

    Default

    I also experimented with my first SR shave today and found the razor to be a little dull, except in my case it's my own fault and I know better. I didn't get any razor burn or nicks, however, but I also didn't get a particularly even shave. More learning to do, much more.

  11. #8
    Plausibly implausible carlmaloschneider's Avatar
    Join Date
    May 2011
    Location
    Mount Torrens, South Australia
    Posts
    5,979
    Thanked: 485

    Default

    I'm really new to this too, so I have no 'wise' comments, however what being new means is I have a good memory of the first shave a week ago. I also shaved without stropping (had no strop). It wasn't a problem. I DID find a few days later, that if i used too steep an angle I got a little razor burn. I have found I DO need to concentrate on a 30 degrees or less angle, and I went VERY lightly; probably too lightly, but I thought better that than a sliced up face. I only did one pass WTG first time too; I wasn't brave enough for anything else.
    Actually, as much as I am loath to do so, I'm going to disagree with the HHT (I know, banish me). I think you actually already did the appropriate test when you said the razor tugged and pulled; I think THAT was the test that should have told you it wasn't sharp.
    mjhammer likes this.
    Stranger, if you passing meet me and desire to speak to me, why should you not speak to me? And why should I not speak to you?
    Walt Whitman

  12. #9
    The Great & Powerful Oz onimaru55's Avatar
    Join Date
    May 2008
    Location
    Bodalla, NSW
    Posts
    15,595
    Thanked: 3747

    Default

    If the lather was right & the razor was sharp the angles were wrong.

    Some words of wisdom below from JR Torrey:
    http://straightrazorpalace.com/razor...tml#post291499
    “The white gleam of swords, not the black ink of books, clears doubts and uncertainties and bleak outlooks.”

  13. The Following User Says Thank You to onimaru55 For This Useful Post:

    mjhammer (06-17-2011)

  14. #10
    Senior Member mjhammer's Avatar
    Join Date
    Apr 2011
    Location
    Wheat Ridge, Colorado
    Posts
    1,330
    Thanked: 262

    Default

    Quote Originally Posted by onimaru55 View Post
    If the lather was right & the razor was sharp the angles were wrong.

    Some words of wisdom below from JR Torrey:
    http://straightrazorpalace.com/razor...tml#post291499
    Why isn't that link a sticky. It should get bumped or something. I would have loved to have seen that when I started out.

    Now let me get this straight. I read that and it led me to believe that a hollow ground razor can be laid flat against the face to shave. I was wondering what the native angle is on the edge of a hollow ground, and if it is any different on a wedge. Can you really lay a hollow ground flat and get it to 'reduce' the whiskers?

    I snagged that photo in the link and blew it up a little for my old eyes. It was kind of a revelation.

    Thanks Oz. How'd you remember that old post. It was from like 2008 or older.

    M
    ​-- Any day I get out of bed, and the first thing out of my mouth is not a groan, that's going to be a good day --

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •