Page 1 of 2 12 LastLast
Results 1 to 10 of 12
Like Tree9Likes

Thread: Shaving with a cheese grater

  1. #1
    Junior Member
    Join Date
    Apr 2011
    Posts
    4
    Thanked: 1

    Default Shaving with a cheese grater

    I've just had my second straight razor shave, I feel like I've been shaving with a cheese grater. Judging by the results I might as well have done!!.... oh dear......

    OK, it's probably my fault - I purchased a new DOVO special after a bit of research - however, it wasn't sold as shave ready, and now I'm wondering what to do in order to make it so. I know the answer is to "send it to a specialist" to have it made shave ready but I'm on a very tight budget so that's not an option right now. And I live in the middle of France. I also have a leather/ canvas hanging strop and 2 cubes of paste (red/ blue foil) - I carefully stropped the razor on the bare canvas (50 times) and then on the bare leather (50 times) which made the second shave better than the first, or was that 'experience'?! There's no indication if or where to use the pastes, so I've left them well alone......

    Maybe the cheese grater effect is normal for newbies?.....

  2. #2
    They call me Mr Bear. Stubear's Avatar
    Join Date
    Jul 2009
    Location
    Alton, UK
    Posts
    5,715
    Thanked: 1683
    Blog Entries
    3

    Default

    If it wasn't sold as shave ready the chances are that it isn't.

    Technique will play it's part but you do need to start with a shave ready edge. If you want me to I'll hone her up for you gratis? just drop me a PM if you're interested. I'm in London so it won't spend ages with the mail either...!

    Apart from a shave ready edge the stropping, lather and pre shave prep will all also have a big impact. Make sure you don't skimp on things like good quality lather and hot towels as these are crucial to getting the best possible shave.

    I wouldn't use the pastes as they work well for touch ups but they won't make a dull blade shave ready. You should also apply them to a second pasted strop and leave your daily strop clean. You can make a pasted strop from a piece of balsa wood, just lap it flat and apply the paste. They're good for touch ups and finishing the honing process, but as I say, they won't make a dull blade shave ready.

    Shave readiness is the first thing to get sorted, then focus on your stropping and shaving prep.

    Good luck and keep us posted!
    Last edited by Stubear; 04-14-2011 at 10:44 AM.

  3. The Following 5 Users Say Thank You to Stubear For This Useful Post:

    Glenn24 (04-14-2011), Maxi (04-14-2011), mjhammer (05-03-2011), moto (04-14-2011), thehekler (04-14-2011)

  4. #3
    The Great & Powerful Oz onimaru55's Avatar
    Join Date
    May 2008
    Location
    Bodalla, NSW
    Posts
    15,597
    Thanked: 3748

    Default

    Nothing to add to Stu's post but ...Welcome to SRP
    “The white gleam of swords, not the black ink of books, clears doubts and uncertainties and bleak outlooks.”

  5. #4
    Some kind of Zombie BigJim's Avatar
    Join Date
    Feb 2011
    Location
    Le Mars Iowa
    Posts
    1,019
    Thanked: 166

    Default

    Welcome to SRP! I'd take Stu up on his offer. I know what it's like to be "budget conscious" (read poor), and that's a great offer that will pay dividends down the road.

    Peace,

  6. The Following User Says Thank You to BigJim For This Useful Post:

    Stubear (04-14-2011)

  7. #5
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    26,960
    Thanked: 13226
    Blog Entries
    1

    Default

    I would take Stu up on his gracious offer too,, heck just chuck it really hard across the Channel he'll catch it

    Good on you Stu

  8. The Following User Says Thank You to gssixgun For This Useful Post:

    Stubear (04-14-2011)

  9. #6
    Senior Member deighaingeal's Avatar
    Join Date
    Apr 2010
    Location
    Yakima, Wa
    Posts
    1,955
    Thanked: 494

    Default

    Quote Originally Posted by gssixgun View Post
    I would take Stu up on his gracious offer too,, heck just chuck it really hard across the Channel he'll catch it

    Good on you Stu
    Now that would be some fun youtube editting!

    Welcome and I agree, take Stu up on his offer.
    gssixgun likes this.

  10. The Following User Says Thank You to deighaingeal For This Useful Post:

    Stubear (04-14-2011)

  11. #7
    Junior Member
    Join Date
    Apr 2011
    Posts
    4
    Thanked: 1

    Default

    Quote Originally Posted by BigJim View Post
    Welcome to SRP! I'd take Stu up on his offer. I know what it's like to be "budget conscious" (read poor), and that's a great offer that will pay dividends down the road.

    Peace,
    I fully intend to, what a great introduction to SRP! : )

  12. #8
    Junior Member
    Join Date
    Apr 2011
    Posts
    4
    Thanked: 1

    Default

    Just like to say a huge thank you to Stubear for honing my razor, it has made a massive difference to my beginner's shaving experience.

    It has been said many times before, but this should be a lesson to anyone taking up straight razor shaving; no matter what you might read, ALWAYS buy your razor from a reputable supplier who will sell it in SHAVE READY condition, or be prepared to send it for honing before reaching for the soap & brush - I had read elsewhere that my new Dovo Special razor would be capable of giving a good shave straight from the factory, maybe an experienced hand might have been able to produce a clean shave, but in my hands the results were a long way from that. Now with a freshly honed edge and pleasantly tingling cheeks I feel confident the learning curve will be more of an ongoing pleasure than an awkward, painful challenge....

    Many thanks again!

  13. #9
    ace
    ace is offline
    Senior Member blabbermouth ace's Avatar
    Join Date
    Dec 2010
    Location
    Virginia
    Posts
    3,362
    Thanked: 581

    Default

    It is possible to shave with a cheese grater, but good results don't come easy.
    If your technique is not well-refined, then results can make one queasy.
    The main problem is that although they can be honed so that hairs will pop.
    when you try to smooth out all those edges, it'll cut the crap right out of your strop.
    BigJim likes this.

  14. #10
    Senior Member hcintineo's Avatar
    Join Date
    Apr 2011
    Location
    Montvale, NJ
    Posts
    260
    Thanked: 51

    Default

    definitely take up Stubear's offer! you can't go wrong. welcome to the forum. as you've learned in your first thread, everyone here is GREAT!

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •