Page 1 of 3 123 LastLast
Results 1 to 10 of 26
  1. #1
    Junior Member
    Join Date
    Jun 2010
    Location
    Concord NC
    Posts
    22
    Thanked: 0

    Default what is the differnce in razor sizes 4/8 to 6/8

    I know that it is the size in eighths of an inch. I have that much.

    I was wondering what the handling differences are. My first str8 shave was with a 6/8 that I had purchased and now I have some 4/8 and 5/8 that I am working on. I was wondering if there is a lot of differences in how that different widths handle and what they are for.

    Hazen

  2. #2
    -- There is no try, only do. Morty's Avatar
    Join Date
    Feb 2010
    Location
    SE PA
    Posts
    501
    Thanked: 167

    Default

    The different size blades were produced by the manufacturers simply to cater to the whims of various customers. My favorite blade right now is a Frederick Reynolds 7/8 hollow point but I have a 4/8 Rex round point that takes a fine edge and gives an awesome shave. I think I like the bigger blade just because it's bigger. Both razors give me an excellent shave.
    Namaste,
    Morty -_-

  3. #3
    They call me Mr Bear. Stubear's Avatar
    Join Date
    Jul 2009
    Location
    Alton, UK
    Posts
    5,715
    Thanked: 1683
    Blog Entries
    3

    Default

    Its really personal preference TBH. People may prefer the manouverability of a smaller razor, or they may like using a huge axe like blade.

    Smaller blades will probably be lighter and easier to catch those awkward hairs with, like the ones right under the nose. You'll have to rinse the lather off more often though, as they load up faster than larger blades.

    Bigger blades are obviously heavier, and may suit those with larger hands more than the smaller blades. You dont need to rinse them as often as there is more space on the blade for the lather.

    I have razors from 4/8 up to 15/16, and I find myself using the bigger blades more often as I just prefer them. I have quite big hands and I find the little 4/8's are a bit too small and light for my taste.

    All of them shave my just as well as each other though, and the 4/8's shave just as well as the 15/16. Its really just down to what you prefer to use.
    Last edited by Stubear; 06-15-2010 at 08:57 AM.

  4. The Following User Says Thank You to Stubear For This Useful Post:

    jojingo (06-15-2010)

  5. #4
    Senior Member dward's Avatar
    Join Date
    Aug 2008
    Location
    Germantown, MD
    Posts
    1,686
    Thanked: 245

    Default

    The two biggest differences will be weight and handling. Generally, the bigger the blade the heavier the weight (more steel). Handling will be different as well. The smaller the blade, the tighter the turn radius. This means that it will be more manueverable and can get into tight places easier. I love my 6/8 razors and wouldn't trade them for the world. I have had a 4/8 but didn't like the feel of it in my hand.

  6. #5
    Housebound Bum ! ianp1966's Avatar
    Join Date
    Feb 2010
    Location
    Chesterfield UK
    Posts
    413
    Thanked: 104

    Default

    I have razors from 4/8 to 7/8 and the bigger blade is my favourite, i find it easier to use than a smaller blade, and that includes head shaving too, i have no idea why that is it just feels more comfortable to use

    ian

  7. #6
    aka shooter74743 ScottGoodman's Avatar
    Join Date
    Sep 2009
    Location
    SE Oklahoma/NE Texas
    Posts
    7,285
    Thanked: 1936
    Blog Entries
    4

    Default

    Best thing about a 4/8 is it's maneuverability, it's like a sportscar & can get to places the larger blades simply can't like the upper lip/nose area. You also get a lot of feedback from them. For me anyway, the larger the blade, the less the feedback and maneuverable. I guess it's simply the weight as mentioned above. My preferences are 6/8 & 7/8...my 8/8 shaves wonderfully, but I have to take more time getting those tough spots like under the nose and around the adams apple. Instead of a 8-10 min shave, takes me arround 15 min with the 8/8. I keep a Boker "wedge" and MAB 4/8 in my rotation simply to "drive" a sportscar once and a while.
    Southeastern Oklahoma/Northeastern Texas helper. Please don't hesitate to contact me.
    Thank you and God Bless, Scott

  8. #7
    Senior Member Doublewood's Avatar
    Join Date
    Feb 2010
    Location
    Sheffield UK
    Posts
    129
    Thanked: 19

    Default

    I have just bought a 4/8 razor, and although I understand the widths and so far have only shaved with 5/8 the 4/8 looks really small in comparison.
    I am wondering if the lighter more manoeurable blade is likely to make me complacent and do the blades look comparatively larger than the 5/8 when going 6/8 and upwards ?

  9. #8
    Scutarius Fbones24's Avatar
    Join Date
    May 2010
    Location
    Freeport, NY
    Posts
    1,337
    Thanked: 1454

    Default

    Quote Originally Posted by Doublewood View Post
    I have just bought a 4/8 razor, and although I understand the widths and so far have only shaved with 5/8 the 4/8 looks really small in comparison.
    I am wondering if the lighter more manoeurable blade is likely to make me complacent and do the blades look comparatively larger than the 5/8 when going 6/8 and upwards ?
    My opinion only, but based on sight alone, the 5/8 looks to be closer in size to the 4/8 than it does to the 6/8. That is just my personal opinion. Obviously it is in the middle, but when I look at these placed together, the 5/8 just seems "small" in comparison to the 6/8.

    With that said, I have only been SR shaving for a little over a month but in my short time, the 5/8 has become my favorite.

  10. #9
    Senior Member ziggy925's Avatar
    Join Date
    Oct 2009
    Location
    Colorado
    Posts
    325
    Thanked: 36

    Default

    IMHO you have to start somewhere, and a 6/8 is a good starting point. Once you get a little experience you may decide you want a bigger, heavier blade, or you may decide you want something lighter and smaller. Most of us have more than one razor, but if you are on a tight budget you can always sell the razor as used if you decide to change.

    Take a look at the razors at SRD. You will see the same sizes for sale on most razors, which should tell you these are the most popular. I find my 6/8 Dovo pretty much does it all.

  11. #10
    Natty Boh dave5225's Avatar
    Join Date
    Mar 2007
    Posts
    1,462
    Thanked: 183

    Default

    IMHO the 6/8 razor is pretty much the ideal size for general shaving except for doing the upper , and lower lip area . I find it cuts through 3 or more days of stubble better than a 5/8 or 4/8 . I think of the 5/8 as a compromise razor . It's big enough to do the heavy cutting , and small enough to get in the tight spots . I think the 5/8 is the best razor for the person who only wants to have one razor , and I think they are great for people who like a smaller razor . The 4/8 is great for the upper , and lower lip area , and for general touch up at the end of the shave . When I shave , I use all 3 sizes . I do my first pass with a 6/8 , the second pass with a 5/8 , and use 4/8 for the reasons I already mentioned . I really don't need to use the 5/8 for the second pass , but I need to use my 5/8 razors for something . I suppose it's all part of being a "straight razor nut".
    Greetings , from Dundalk , Maryland . The place where normal people , fear to go .

  12. The Following User Says Thank You to dave5225 For This Useful Post:

    Nightblade (07-10-2010)

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •