Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Junior Member Romac's Avatar
    Join Date
    Mar 2010
    Location
    Georgia
    Posts
    15
    Thanked: 4

    Thumbs up First Shave - no prob

    first post too!

    I just received my first straight razor in the mail - a vintage Genko purchased from yfra8821 off Ebay for $13 which he honed for me for another $10 http://cgi.ebay.com/ws/eBayISAPI.dll...view=all&tid=0

    He's probably a member here, but I've no idea what his username is - super helpful guy, and as far as I can tell, this razor is truly shave ready.

    Anyhow - I had two days worth of stubble, and dove into my bathroom, razor in hand. No stropping, just whipped up a quick lather with some of my wife's fancy bar soap. (i've got some clay and proper shaving soap making supplies coming in the mail any day now)

    I started with great apprehension after reading much instruction here and from other sources, but my fears were in vain.

    I have no idea which beard types are easier than others to shave, but I have a very coarse beard - think "wire" - makes an excellent scratching "post".

    I did a first pass with the grain - no problems - not a single nick - my chin and mustache were a bit weird/awkward, but I figured it out.

    I got ****y and did a second pass against the grain - also no problems and not a single nick. The mustache and chin areas felt very "sketchy" and I really thought I was going to cut myself, but I didn't.

    The shave is not quite baby-bottom smooth just under my chin, but everywhere else it's very smooth. My face does feel a bit "raw" but I think that's because my strokes were short so I went over the same area more than normal. With more confident longer strokes, I think this "rawness" will vanish.

    Anyhow I just wanted to thank you guys for being here, and providing all this information. I read the wiki first shave article which really helped illustrate proper blade angle.

    I also wanted to post this here to show nubs like myself that this can be started pretty easily, without cuts, and minimal expense.

    Start up costs:
    $13 for a vintage razor
    $10 to hone it
    $5 for a piece of balsa for a strop (I'm vegan - so no leather for me) which I glued to a piece of bamboo flooring I had laying around - shaved some of a green mibro chromium oxide buffing paste I got at lowes ages ago - mixed it with some alcohol and painted it on (got this tip from here I think)
    $10 for 2 pounds of soap base
    $10 for 2 pounds of benotine (sp?) clay to make my own shaving soap
    $8 for a high quality synthetic knot off ebay which I glued into a wooden knob I made
    $1 for a tiny flower pot I'm using as a shaving bowl

    so $57 total, but I'm also hooked up for at least a year's worth of shaving soap

    I plan on getting a 4k/8k norton hone in about 3 or 4 months which are quite pricey, but who cares? - no more shaving cream or disposable razors.

    So nubs dive in - it's nothing to be anxious about.

  2. #2
    Junior Member bratta's Avatar
    Join Date
    Mar 2010
    Location
    Oklahoma
    Posts
    5
    Thanked: 1

    Default

    Congrats on the shave! You had a much easier time starting off than I did, it sounds like. How is the balsa working out for a strop so far? I'd love to see pictures of how it turned out. That's an interesting idea to help maintain your vegan lifestyle!

  3. #3
    Junior Member Romac's Avatar
    Join Date
    Mar 2010
    Location
    Georgia
    Posts
    15
    Thanked: 4

    Default

    Quote Originally Posted by bratta View Post
    Congrats on the shave! You had a much easier time starting off than I did, it sounds like. How is the balsa working out for a strop so far? I'd love to see pictures of how it turned out. That's an interesting idea to help maintain your vegan lifestyle!
    Well I bought one 3" piece of balsa 36" long, cut it into three 12" pieces then glued them to separate pieces of the flooring I had left over from redoing our floors last year (this bamboo flooring is milled perfectly flat). Lapped them with 220 sandpaper that I laid on a glass table using the pencil line technique i've seen either here or b & b.

    From what I've read, chromium oxide on balsa can extend the time between honing by a month or more - can't really confirm that for about 4 more months i think lol.

  4. #4
    Senior Member AnarchoPhil's Avatar
    Join Date
    Aug 2009
    Location
    Dothan, AL
    Posts
    195
    Thanked: 46

    Default

    I'd like to see pics of some of your stuff

  5. #5
    Member
    Join Date
    Feb 2010
    Posts
    72
    Thanked: 19

    Default

    Congratulations on the first shave! Hope you have many more good ones.

  6. #6
    < Banned User >
    Join Date
    Dec 2009
    Location
    washington dc
    Posts
    49
    Thanked: 6

    Default

    Yeah, I hear that seller is a really great guy and he helps little old ladies cross the street. Seriously, thank you for the kind words and I am very excited for your success the first time out! You are well on your way! Now you can start obcessing on better strops, shave soaps, aftershaves, and of coarse and endless supply of straight razors!

  7. #7
    Junior Member Romac's Avatar
    Join Date
    Mar 2010
    Location
    Georgia
    Posts
    15
    Thanked: 4

    Default

    Quote Originally Posted by AnarchoPhil View Post
    I'd like to see pics of some of your stuff
    okie

    cheapskate shaving kit:
    • bamboo flooring strop with balsa and chromium oxide (tongue intact )
      shaving brush made from a knob off an old flag pole I had lying around, a brass piece from a garden hose thingie (also found laying around), and a synthetic knot purchased off ebay
      $23 vintage genco head barber
      99 cent flower pot shaving "bowl" (I'm a cheap bastard! )



  8. #8
    Junior Member Romac's Avatar
    Join Date
    Mar 2010
    Location
    Georgia
    Posts
    15
    Thanked: 4

    Default

    Quote Originally Posted by kfralin View Post
    Yeah, I hear that seller is a really great guy and he helps little old ladies cross the street. Seriously, thank you for the kind words and I am very excited for your success the first time out! You are well on your way! Now you can start obcessing on better strops, shave soaps, aftershaves, and of coarse and endless supply of straight razors!
    I attribute my nublet success to your fine hone!

    Thanks again!

  9. #9
    < Banned User >
    Join Date
    Dec 2009
    Location
    washington dc
    Posts
    49
    Thanked: 6

    Default

    Thats a darn nice looking brush for "do it yourself"! Not a bad looking razor either! You can actually save a lot of money used straights if you don't fall victim to razor acquisition dissorder (RAD for short). I know I have it very bad and suspect many members here do as well. Just a warning, I started out with one fairly inexpensive straight, a brush/bowl/soap kit from Walgreens, and a leather belt...and a steely nerve. Now I have 13 razors in my "rotation" and truly believe there must be something out there that will get to next weeks whiskers...just be careful!! Again, many thanks and I am super pleased your first shave was a joy!!

  10. #10
    Junior Member Romac's Avatar
    Join Date
    Mar 2010
    Location
    Georgia
    Posts
    15
    Thanked: 4

    Default

    totally anticipated and accounted for...

    i've been prepping my wife by telling her how most of the blades i had on "watch" at ebay went for a hundred dollars or more so she won't have a cow when she sees the littler ebay purchases roll in

    i think she might be too smart though - last time i said that she said "but you already have a razor"

    ha ha ha

    I guess i'll just have to take my spankings like a man! (isn't that an oxymoron??) lol

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •