Results 1 to 9 of 9
  1. #1
    Junior Member jslinger's Avatar
    Join Date
    Mar 2010
    Location
    Vermont
    Posts
    12
    Thanked: 0

    Default What should I hear while stropping?

    Hey guys, I am three shaves in and finding it difficult to know whether or not I am stropping correctly.
    There are a few issues:

    I am pulling the strop just taught enough so that it is in a straight line. Do I want to apply almost no pressure, or enough so that the strop is flexing and being pushed down as I go over it?

    The sound. When I just rub the spine across I hear a dull sound. If I lift the spine I hear a higher pitched sound of the edge. Obviously I don't want to lift the spine off, but do I want to hear the high pitched sound of the edge, or should I not hear that at all?


    Thanks guys

  2. #2
    Senior Member Maskwa's Avatar
    Join Date
    Dec 2009
    Location
    Honing in Canada
    Posts
    174
    Thanked: 39

    Default

    Quote Originally Posted by jslinger View Post
    Hey guys, I am three shaves in and finding it difficult to know whether or not I am stropping correctly.
    There are a few issues:

    I am pulling the strop just taught enough so that it is in a straight line. Do I want to apply almost no pressure, or enough so that the strop is flexing and being pushed down as I go over it?

    The sound. When I just rub the spine across I hear a dull sound. If I lift the spine I hear a higher pitched sound of the edge. Obviously I don't want to lift the spine off, but do I want to hear the high pitched sound of the edge, or should I not hear that at all?


    Thanks guys
    Very little pressure but enough so that you are in contact with the strop. Obviously the strop will drop somewhat because you do need to have full contact with the strop. You should hear a high pitched sound. But it does differ if you have a full wedge VS a full hollow ground razor. The sound you hear while the spine is in contact is likely a good sound - the sound you want.

  3. #3
    Senior Member blabbermouth niftyshaving's Avatar
    Join Date
    Oct 2009
    Location
    Silicon Valley, CA, USA
    Posts
    3,157
    Thanked: 852

    Default

    Quote Originally Posted by jslinger View Post
    Hey guys, I am three shaves in and finding it difficult to know whether or not I am stropping correctly.
    There are a few issues:

    I am pulling the strop just taught enough so that it is in a straight line. Do I want to apply almost no pressure, or enough so that the strop is flexing and being pushed down as I go over it?

    The sound. When I just rub the spine across I hear a dull sound. If I lift the spine I hear a higher pitched sound of the edge. Obviously I don't want to lift the spine off, but do I want to hear the high pitched sound of the edge, or should I not hear that at all?


    Thanks guys
    My goal this week is to apply only the weight of the razor
    and only enough tension for the deflection to be
    the thickness of the closed razor.

    My test is to stretch the strop horizontal and set the
    closed razor on it and lighten or tighten so the flex
    dips the blade about the thickness of the closed razor.

    I am doing this because I tend to be slightly heavy handed
    and need to remind myself to be light and almost silent.
    Sometimes I visualize a big white duck feather that has
    been stripped on one side, light and silent with both
    the back and the edge on the strop.

  4. #4
    Member wuff's Avatar
    Join Date
    Aug 2009
    Location
    Wasaga Beach, On
    Posts
    66
    Thanked: 10

    Default

    Razor stropping - Straight Razor Place Wiki

    There is a sound clip of proper stropping in the wiki.

  5. The Following User Says Thank You to wuff For This Useful Post:

    niftyshaving (03-15-2010)

  6. #5
    Junior Member jslinger's Avatar
    Join Date
    Mar 2010
    Location
    Vermont
    Posts
    12
    Thanked: 0

    Default

    I heard that previously, but when I lay my razor flat and really concentrate on a single stroke, it doesn't really sound like either of those sounds. The sound is consistent, which I believe is the purpose of the sample, but the pitch is quite a bit different. (expectedly so)

  7. #6
    Senior Member blabbermouth niftyshaving's Avatar
    Join Date
    Oct 2009
    Location
    Silicon Valley, CA, USA
    Posts
    3,157
    Thanked: 852

    Default

    Quote Originally Posted by wuff View Post
    Razor stropping - Straight Razor Place Wiki

    There is a sound clip of proper stropping in the wiki.
    Nice link!
    Beginners should note the sound difference between
    the canvas side and the leather side in the first video.

    Some canvas side material sounds different depending on
    the weave.

  8. #7
    I Bleed Slurry Disburden's Avatar
    Join Date
    Feb 2009
    Location
    Carmel, NY
    Posts
    2,458
    Thanked: 545

    Default

    RWhat worries me is that you said you knew what the sound was like if the spine was lifted. Just doing this momentarily means you may have already rolled the edge or the razor. Does the blade tug on your face more than before since the stropping experiments? All you need to do is make sure the strop is straight and the blade is flat the whole time, the results should improve with your own practices. Its nearly impossible to explain these things over the internet.

  9. #8
    I used Nakayamas for my house mainaman's Avatar
    Join Date
    Aug 2009
    Location
    Des Moines
    Posts
    8,664
    Thanked: 2591
    Blog Entries
    1

    Default

    Every razor sounds different, and the thicker grinds might not sound at all.
    The real goal while stropping is not the sound but the pressure you apply.
    Stefan

  10. #9
    Junior Member jslinger's Avatar
    Join Date
    Mar 2010
    Location
    Vermont
    Posts
    12
    Thanked: 0

    Default

    I did run it very lightly for a few inches with the spine lifted. I have done probably around 500 laps since then. It feels exactly the same since I first used it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •