Results 1 to 10 of 10
  1. #1
    < Banned User >
    Join Date
    Dec 2009
    Location
    Philadelphia, PA
    Posts
    73
    Thanked: 7

    Exclamation Help! I'm being visited by The Mangler!

    I have been shaving with a straight for around 3 weeks. I purchased a Dovo Best 5/8 half hollow new. I diligently stropped it and for the last 3 weeks I have taken turns slicing up various parts of my face and neck. My razor does not pass the HHT, but it sure seems sharp - at least sharp enough to cut the crap out of my face.

    People at work think I have joined Fight Club.

    Is my razor likely too sharp or too dull? It certainly does not easily cut my hair but it certainly does a fine job on the skin. I am committed to the straight, but this is getting downright grusome. Is there anyone out there that can help me figure out why i am having this problem?

    Thanks!

  2. #2
    The original Skolor and Gentileman. gugi's Avatar
    Join Date
    Aug 2007
    Posts
    17,410
    Thanked: 3906
    Blog Entries
    1

    Default

    welcome to srp

    it's rather hard to say if your razor is dull or you're not using it right. if you have gotten it honed by somebody with a lot of experience honing and shaving and they tested it then it's very unlikely that it was dull.

  3. The Following User Says Thank You to gugi For This Useful Post:

    jtischler (12-31-2009)

  4. #3
    all your razor are belong to us red96ta's Avatar
    Join Date
    Sep 2009
    Location
    Fresno, CA
    Posts
    1,368
    Thanked: 446

    Default

    It sounds like your technique more than the sharpness of the blade. Watch those angles and it'll start to come together.

  5. The Following User Says Thank You to red96ta For This Useful Post:

    jtischler (12-31-2009)

  6. #4
    Wander Woman MistressNomad's Avatar
    Join Date
    Dec 2009
    Location
    Minneapolis, at the moment.
    Posts
    367
    Thanked: 160

    Default

    When you say your purchased it "new," does this mean the package was unopened?

    If so, it was never honed. It may have been advertised as shave ready, but from what I have read here, factory shave-ready, and well-honed shave-ready are vastly different things.

    Factory shave ready isn't good enough. Send it off to someone to be honed. And fortunately for you, there are lots of very friendly and experienced honemeisters here to help.

    Alternately, it could be your stropping. I'm a newbie too, but go to Wiki on SRP about stropping and think about your technique.

  7. The Following User Says Thank You to MistressNomad For This Useful Post:

    jtischler (12-31-2009)

  8. #5
    Large Member ben.mid's Avatar
    Join Date
    Aug 2008
    Location
    Oxfordshire, England
    Posts
    3,096
    Thanked: 763

    Default

    Factory sharp isn't good enough to shave with generally.
    If it came honed shave ready, it would have been fine when you got it.
    You may have rolled the edge stropping it, thus rendering it in need of correct stropping, or re honing.
    It's probably your technique on top of any other issues.

  9. The Following User Says Thank You to ben.mid For This Useful Post:

    jtischler (12-31-2009)

  10. #6
    Lynn3877's hubby
    Join Date
    Dec 2009
    Location
    Kentucky
    Posts
    25
    Thanked: 3

    Default

    Like you I am new to this. I'm only a few shaves in myself and succeeded in cutting myself up my last shave. My wife said it looked like I got into a fight with one of the cats.

    After looking through the forums and the wiki I figured out that I was dulling the edge with my stropping technique. My blade wouldn't pass the HHT. Actually I had to apply a fair amount of pressure to get the hair to cut. I spent about 20 minutes stropping it and really paying attention to what I was doing and now it will cut the hair with no effort whatsoever. I still think it could be sharper but it is light years from what it was. I can't wait to shave with it tonight.

  11. The Following User Says Thank You to Raithen For This Useful Post:

    jtischler (12-31-2009)

  12. #7
    Senior Member Nolig23's Avatar
    Join Date
    Apr 2009
    Location
    Edison, NJ
    Posts
    154
    Thanked: 15

    Default

    Welcome to SRP.

    Where did you buy the razor? Just asking because some places won't hone it for you when you buy it. Be mindful of your angles and the pressure you use when you shave. Straight razors are a lot more effective than a disposable cartridge razor so you don't need to use much pressure at all to get a clean shave. Hope that helps some. Keep at it though, when I started 7 months ago I used to cut my face up as well.

  13. The Following User Says Thank You to Nolig23 For This Useful Post:

    jtischler (12-31-2009)

  14. #8
    Senior Member crushnbugs's Avatar
    Join Date
    Jul 2009
    Location
    New York
    Posts
    526
    Thanked: 64

    Default

    Well here is my two cents,

    I have found with out fail that when my razors start getting dull I will start cutting myself. I will bet technique is a very small part 20% but a dull blade is the rest 80%.

    Get that thing honed by a professional and then give it a whirl.

    Good luck!

  15. The Following User Says Thank You to crushnbugs For This Useful Post:

    jtischler (12-31-2009)

  16. #9
    Member
    Join Date
    Dec 2009
    Location
    northern california
    Posts
    62
    Thanked: 3

    Default

    In short order. bought a new master(before finding this site and reading the wiki) couldn't cut butter. Borrowed ggrandpas spike from mom, lot better still not quite there though, Picked up a disposible straight from the local beauty store(still can't do the hht) silced me up(wife is being very patient). Now waiting on my 2 new razors I just ordered from Ruprazor last night

  17. The Following User Says Thank You to smills For This Useful Post:

    jtischler (12-31-2009)

  18. #10
    Senior Member sffone's Avatar
    Join Date
    Jun 2009
    Location
    Baton Rouge, La.
    Posts
    357
    Thanked: 93

    Default

    There's much truth to the old adage that a dull razor will cut you quicker than a sharp one. I've been shaving with a straight for quite some time and consistently get great shaves and rarely nick myself. However, I recently had to shave with a razor that was not as sharp as it should have been and I ended up looking like I'd tried to shave with a lawnmower. I would suggest you get your razor honed by one of the honemeisters here on the forum and start from there.

  19. The Following User Says Thank You to sffone For This Useful Post:

    jtischler (12-31-2009)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •