Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 34
Like Tree31Likes

Thread: Dovo Best Quality vs. Gold Dollar

  1. #21
    There is no charge for Awesomeness Jimbo's Avatar
    Join Date
    Aug 2006
    Location
    Maleny, Australia
    Posts
    7,977
    Thanked: 1587
    Blog Entries
    3

    Default

    With all due respect, the OP of this thread acknowledged his inexperience and had used his GD once at the time of posting.

    I have no doubt you can get a GD to shave, and maybe even shave well. I've honed a couple of them over the years and they were OK. What I'm more interested in is the average time between rehones, or even bevel sets.

    Everyone gets very gung-ho about the fact they can get these things to shave. I've heard very little over the past 5 years about living with one day in, day out. There's more to a razor than just the few shaves post-hone. It's also about how that edge holds up over time and the medium to long-term maintenance requirements.

    We know the good brands keep up over time. GD info in this regard isn't, as far as I can tell, as readily available.

    There is a reason they are cheap, and it is not just to do with the scales. The steel might tap-dance along the line of shaveability, but I'm prepared to bet my reputation (whatever it is...) that it isn't much better quality-wise than that.

    James.
    AlanII, lz6, earcutter and 4 others like this.
    <This signature intentionally left blank>

  2. The Following 2 Users Say Thank You to Jimbo For This Useful Post:

    engine46 (08-15-2014), Hirlau (08-15-2014)

  3. #22
    Senior Member blabbermouth bluesman7's Avatar
    Join Date
    Jul 2014
    Location
    Denver CO
    Posts
    4,559
    Thanked: 810

    Default

    Quote Originally Posted by Jimbo View Post
    What I'm more interested in is the average time between rehones, or even bevel sets.

    Everyone gets very gung-ho about the fact they can get these things to shave. I've heard very little over the past 5 years about living with one day in, day out. There's more to a razor than just the few shaves post-hone. It's also about how that edge holds up over time and the medium to long-term maintenance requirements.

    We know the good brands keep up over time. GD info in this regard isn't, as far as I can tell, as readily available.

    There is a reason they are cheap, and it is not just to do with the scales. The steel might tap-dance along the line of shaveability, but I'm prepared to bet my reputation (whatever it is...) that it isn't much better quality-wise than that.

    James.
    There is a guy on another razor site who committed to a year with the same GD. He is well on his way to completing his commitment. The maintenance is no different than other razors.

  4. #23
    barba crescit caput nescit Phrank's Avatar
    Join Date
    Jul 2013
    Location
    Toronto, Canada
    Posts
    9,660
    Thanked: 2691

    Default

    Quote Originally Posted by bluesman7 View Post
    There is a guy on another razor site who committed to a year with the same GD. He is well on his way to completing his commitment. The maintenance is no different than other razors.
    Well, that may be your opinion, but the two I have, if I was to use them to shave, wouldn't make it more than three or four shaves before they'd have to hit the Nani 12k, minimum for a refresh. That, in addition to their inconsistent geometry makes them very tricky to even get an even bevel.

    And as soon as your taking a blade to the stones frequently, you're constantly reducing the metal available on the blade, and as you use more of the metal, the geometry will change.

    My other blades, most over a year old, have been honed once, and never needed anything more than good stropping and some crox now and then.

    GDs are great to practice honing on for the very reason they are so inconsistent in their geometry, hone 10 different GDs, and you'll be better prepared to tackle a blade with similar issues.

    To use as a go-to razor, wouldn't even think of it and why? You can get real steel, a nice vintage blade, for $20.00 or less to practice on and then have a consistent, usable razor.

    edited to add:

    This is a $12.00 razor I grabbed almost a year ago, sent it out to get honed, it's one of my favorite blades now.

    Last edited by Phrank; 08-15-2014 at 02:16 PM.

  5. #24
    Senior Member blabbermouth engine46's Avatar
    Join Date
    Feb 2014
    Location
    Republic of Texas
    Posts
    7,810
    Thanked: 1744
    Blog Entries
    2

    Default

    Quote Originally Posted by Phrank View Post
    Well, that may be your opinion, but the two I have, if I was to use them to shave, wouldn't make it more than three or four shaves before they'd have to hit the Nani 12k, minimum for a refresh. That, in addition to their inconsistent geometry makes them very tricky to even get an even bevel.

    And as soon as your taking a blade to the stones frequently, you're constantly reducing the metal available on the blade, and as you use more of the metal, the geometry will change.

    My other blades, most over a year old, have been honed once, and never needed anything more than good stropping and some crox now and then.

    GDs are great to practice honing on for the very reason they are so inconsistent in their geometry, hone 10 different GDs, and you'll be better prepared to tackle a blade with similar issues.

    To use as a go-to razor, wouldn't even think of it and why? You can get real steel, a nice vintage blade, for $20.00 or less to practice on and then have a consistent, usable razor.

    edited to add:

    This is a $12.00 razor I grabbed almost a year ago, sent it out to get honed, it's one of my favorite blades now.

    Nice razor Phrank!!!
    Phrank likes this.

  6. #25
    Senior Member blabbermouth bluesman7's Avatar
    Join Date
    Jul 2014
    Location
    Denver CO
    Posts
    4,559
    Thanked: 810

    Default

    Quote Originally Posted by Phrank View Post
    Well, that may be your opinion, but the two I have, if I was to use them to shave, wouldn't make it more than three or four shaves before they'd have to hit the Nani 12k, minimum for a refresh.My other blades, most over a year old, have been honed once, and never needed anything more than good stropping and some crox now and then.
    ]
    My Double Arrow, arguably identical to Gold Dollars, has 35 shaves and counting on just clean strops. My GD behaved the same before I PIFed it to a new straight enthusiast.

    It is not my "opinion" that another shaver has committed to a year of GD shaves to show that the razor is viable, it is a fact that he is actually doing it.

    Do GDs and DAs have geometry issues?(ret) Absolutely. Will they be passed down and treasured by relatives? No, they are cheap junk. But the vast majority of them are capable of holding a great edge. The last statement, of course, is my opinion.

  7. #26
    Senior Member feltspanky's Avatar
    Join Date
    Jul 2014
    Location
    Kentucky
    Posts
    707
    Thanked: 92

    Default

    Quote Originally Posted by Phrank View Post
    Well, that may be your opinion, but the two I have, if I was to use them to shave, wouldn't make it more than three or four shaves before they'd have to hit the Nani 12k, minimum for a refresh. That, in addition to their inconsistent geometry makes them very tricky to even get an even bevel.

    And as soon as your taking a blade to the stones frequently, you're constantly reducing the metal available on the blade, and as you use more of the metal, the geometry will change.

    My other blades, most over a year old, have been honed once, and never needed anything more than good stropping and some crox now and then.

    GDs are great to practice honing on for the very reason they are so inconsistent in their geometry, hone 10 different GDs, and you'll be better prepared to tackle a blade with similar issues.

    To use as a go-to razor, wouldn't even think of it and why? You can get real steel, a nice vintage blade, for $20.00 or less to practice on and then have a consistent, usable razor.

    edited to add:

    This is a $12.00 razor I grabbed almost a year ago, sent it out to get honed, it's one of my favorite blades now.

    Phrank: That's a mighty fine razor you acquired for twelve dollars.
    Phrank likes this.

  8. #27
    barba crescit caput nescit Phrank's Avatar
    Join Date
    Jul 2013
    Location
    Toronto, Canada
    Posts
    9,660
    Thanked: 2691

    Default

    Quote Originally Posted by feltspanky View Post
    Phrank: That's a mighty fine razor you acquired for twelve dollars.
    I agree, I then found two other French framebacks, both Duveres Freres #19, for under $20.00 each...one turned out like the one in the pic...the other one I busted out on, frown was too far gone and there was a crack in the heel...win some, lose some...but they are among my favorite blades.

    Going to get a well deserved "off topic" penalty soon....

  9. #28
    Senior Member AlanII's Avatar
    Join Date
    Apr 2008
    Posts
    1,689
    Thanked: 244

    Default

    Quote Originally Posted by Phrank View Post
    I agree, I then found two other French framebacks, both Duveres Freres #19, for under $20.00 each...one turned out like the one in the pic...the other one I busted out on, frown was too far gone and there was a crack in the heel...win some, lose some...but they are among my favorite blades.

    Going to get a well deserved "off topic" penalty soon....
    I prefer yours to the Gold Dollars, Phrank.
    Hirlau likes this.

  10. #29
    Senior Member blabbermouth engine46's Avatar
    Join Date
    Feb 2014
    Location
    Republic of Texas
    Posts
    7,810
    Thanked: 1744
    Blog Entries
    2

    Default

    Quote Originally Posted by AlanII View Post
    I prefer yours to the Gold Dollars, Phrank.
    I'll agree with that!

  11. #30
    Junior Member
    Join Date
    May 2014
    Location
    Las Vegas
    Posts
    13
    Thanked: 0

    Default

    GD razors suck. I would go with whipped dog, his razors are of good quality and are shave ready.
    earcutter likes this.

Page 3 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •