Page 1 of 2 12 LastLast
Results 1 to 10 of 19
  1. #1
    Junior Member sillyfishyboy's Avatar
    Join Date
    Jul 2009
    Location
    Worcestershire, UK
    Posts
    25
    Thanked: 2

    Default Stropping for your own protection

    Fortunately I got into the habit of stropping before and after every shave, but last night I found one of the hidden benefits of this practice.

    Last night I went to have a quick shave, and grabbed the razor next in the rotation (only two), cleaned off the oil, ran it under some hot water and then took it to the strop. Even though I try to strop very lightly, my first pass almost destroyed my strop by scraping off the surface. After looking at the razor very closely. I saw that the edge seemed to be folded over. Fortunately I was able to use my backup but was pretty annoyed that somehow I must have banged the edge of my favorite blade. Although after some thought I shudder to think what it would have done to my face if I hadnt stropped first. Assumably since the edge was folded, the sharp edge would never be pointing to my face, but it was also left with a number of nicks which could have been pretty nasty.

    After grumbling about for a bit, my wife finally admitted that she had used it to cut a plastic strap off a delivery. Even though I had told her numerous times that the edge was delicate and it was never to be used for anything other than shaving. She thought I must have been exagerating and assumed I would never notice. Hmmm.
    Needless to say I now need to get a new strop and repair my razor.
    I have a japanese 1k and 6k waterstone and I had a belgian Yellow coticule on order which should arrive some time this week. Would this be ok to bring the edge back or do I really need to send it off to be professionally honed?

    Any thoughts appreciated.

  2. #2
    Senior Member
    Join Date
    Jan 2007
    Posts
    108
    Thanked: 13

    Default

    Sorry about the bad luck, but Im pretty sure you can save that strop. Maybe one of the guys can tell you how to resurface it. I know it can be done to vintage restorations.

  3. #3
    Straight Shaver Apprentice DPflaumer's Avatar
    Join Date
    Sep 2009
    Location
    Boone, NC
    Posts
    1,093
    Thanked: 168

    Default

    I think unless you are very comfortable with your own skills, you should send it out to be honed. I think the procedure for strop resurfacing involves a pumice stone and some fine sandpaper, but I have never done it myself. One of the stop pros will chime in I'm sure to help you out.

    Other than that... I'm glad my fiance is afraid to even handle my straight razors. Must be something about that mythical sharpness and legends of cut throats.

  4. #4
    Junior Member sillyfishyboy's Avatar
    Join Date
    Jul 2009
    Location
    Worcestershire, UK
    Posts
    25
    Thanked: 2

    Default

    SSSHHHHHHHhhhhh!
    Dont let the wife know that! To be honest I was more concerned about the blade. I have been looking for a good excuse to get a new strop for a while as it is a pretty nasty imitation leather.. or at least really poor leather strop that I got when I first began that came free with my razor. At least now I can get a half decent one and not have to explain my purchase.

  5. #5
    Straight Shaver Apprentice DPflaumer's Avatar
    Join Date
    Sep 2009
    Location
    Boone, NC
    Posts
    1,093
    Thanked: 168

    Default

    So basically... in strop terms its a net gain for you.

    Well played my friend.

  6. #6
    Junior Member sillyfishyboy's Avatar
    Join Date
    Jul 2009
    Location
    Worcestershire, UK
    Posts
    25
    Thanked: 2

    Default

    Yea, its all coming up roses.
    Plus she is feeling so guilty that there is a good chance nagging will be down to a minimum for a day or two.
    I wonder if I had played it up a bit I could have gotten a new razor out of it? Well maybe that is hoping for too much.

    Well now I just have to find That Platinum plated Latigo Strop with embedded emeralds that is essential to rectify the situation.

    Wonder if Rolex makes a strop/clock?

  7. #7
    Straight Shaver Apprentice DPflaumer's Avatar
    Join Date
    Sep 2009
    Location
    Boone, NC
    Posts
    1,093
    Thanked: 168

    Default


  8. #8
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    Quote Originally Posted by sillyfishyboy View Post
    After grumbling about for a bit, my wife finally admitted that she had used it to cut a plastic strap off a delivery. Even though I had told her numerous times that the edge was delicate and it was never to be used for anything other than shaving. She thought I must have been exagerating and assumed I would never notice. Hmmm.
    As far as the wife ..... the rule of thumb, I am told, is that when you beat her the stick should be of a diameter no larger than your thumb. No jury will convict you.

    As far as correcting the razor if it was me I would maybe back hone a few strokes on that 6k and then do a few more edge leading strokes and do the TPT to see what it felt like. Maybe strop on linen 50 strokes and feel it again. Steve over at The Invisible Edge is a good honer and in the UK if worse comes to worse and you have to send it out.
    __________________
    Last edited by JimmyHAD; 11-09-2009 at 02:14 PM.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  9. The Following User Says Thank You to JimmyHAD For This Useful Post:

    sillyfishyboy (11-09-2009)

  10. #9
    . Otto's Avatar
    Join Date
    Sep 2008
    Posts
    3,754
    Thanked: 3708

    Default

    I'm sure the razor is destroyed too, and that you need a Mastro Livi custom to replace it, since it was your best shaver.




    "Cheap Tools Is Misplaced Economy. Always buy the best and highest grade of razors, hones and strops. Then you are prepared to do the best work."
    - Napoleon LeBlanc, 1895

  11. #10
    Hibernator ursus's Avatar
    Join Date
    Aug 2009
    Posts
    623
    Thanked: 134

    Default

    Today's guest lecture: "Guilting 101: Fun and profitable".

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •