Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Junior Member
    Join Date
    Aug 2009
    Posts
    5
    Thanked: 0

    Default newbie with few questions

    As a way of background....I have a JA henckels razor that i bought off ebay. I have a badger hair brush with no stand and I've been using a leather strop.

    My razor was sharpened prior to when I bought it but I'm worried its not sharp enough. How do I know if its sharp enough?

    Wetstone. I don't have a wet stone and the guy I bought off of said I probably wouldn't need to sharpen for about a year if I strop. I've been stropping but I think my razor is dulling. How often do I need to hone and what hone should I buy?

    Strop. I have a standard linen and leather strop. Do I need to use any kind of cream or anything to maintain the leather? It seems to be getting scratched up.

    Soap. I've been using a shave soap out of a wooden bowl with a lid. Its not very deep though. Should I be getting the soap out of the bowl and then frothing it up in something else or is the wooden bowl designed to be used to make the lather and then take it right on my face.

    In general I'm having problems shaving without cutting myself and the razor is dragging a lot which is why I'm worried its not sharp. I've looked through theforums and other web sites but haven't been able to find the answers. I'm hoping someone with experience can shed some light for me.

    Thanks!

  2. #2
    collects cannonballs JeremyLee's Avatar
    Join Date
    Mar 2009
    Location
    Laurel, MS
    Posts
    90
    Thanked: 11

    Default

    First off, welcome to the SRP. You have certainly come to the right place. I am only about 5 months in to str8 shaving myself and by no means an adept, but I had been wet-shaving for nearly a year when I took up the straight and have had a fairly smooth transition. Sounds like to me your razor needs honing, but there are so many variables. Having it properly honed will eliminate one of those variables. Check the Vendor's Corner, or there are several members here who offer free honing. With that said, I would hold off on getting a hone; get your shaving technique and lathering down first. As long as your strop is not too nicked up, it should be fine until you have gotten better at stropping, then spring for a good one. And the nicks can be repaired with a pumice stone, or sanded out. Lathering is another thing; read all the tutorials you can. For a little over a year I used a lather bowl after loading the brush with soap. 2 months ago I switched to face-lathering; wished I had started off this way. I have very hard water though, and lather building has always been tough for me. Well, that is my two bits; surely someone more qualified to offer advice will come along and help you more. Good luck and hang in there.

    JLW

  3. #3
    collects cannonballs JeremyLee's Avatar
    Join Date
    Mar 2009
    Location
    Laurel, MS
    Posts
    90
    Thanked: 11

    Default

    Oh, and about maintaining the strop; most guys agree that just rubbing it with the palm of the hand several times (or 20 or so) prior to stropping is sufficient. Some recommend various oils, but I have no experience with them. I would highly recommend getting Lynn's DVD "World of Straight Razor Shaving". One of the best purchases I have made thus far on this venture (except seeing his collection of razors, soaps, etc. really aggravates the ADs)
    -JLW
    Last edited by JeremyLee; 08-19-2009 at 02:34 PM.

  4. #4
    Senior Member AlanII's Avatar
    Join Date
    Apr 2008
    Posts
    1,689
    Thanked: 244

    Default

    Quote Originally Posted by JasonMurph View Post
    As a way of background....I have a JA henckels razor that i bought off ebay. I have a badger hair brush with no stand and I've been using a leather strop.

    My razor was sharpened prior to when I bought it but I'm worried its not sharp enough. How do I know if its sharp enough?

    There are tests, see the Wiki, but the best one is to shave with it. Bear in mind, you're new to this and some, if not all the problems you're experiencing could be down to lack of technique (this was very true for me). It's a steep learning curve, but well worth it.


    Wetstone. I don't have a wet stone and the guy I bought off of said I probably wouldn't need to sharpen for about a year if I strop. I've been stropping but I think my razor is dulling. How often do I need to hone and what hone should I buy?

    The key here is if you strop correctly. Peoples experience as to frequency of honing differ. A barber's hone would be the usual, well priced and good recommendation, for simple edge maintenance. Equally, a coticule or other finisher. Again, see the relevant parts of the Wiki or forum.


    Strop. I have a standard linen and leather strop. Do I need to use any kind of cream or anything to maintain the leather? It seems to be getting scratched up.

    Neatsfoot oil but this really shouldn't be necessary at this point. Just rubbing it with the palm of your hand should keep the leather in good condition. It shouldn't be getting scratched up, could be stropping technique or slight imperfections on the spine or edge?


    Soap. I've been using a shave soap out of a wooden bowl with a lid. Its not very deep though. Should I be getting the soap out of the bowl and then frothing it up in something else or is the wooden bowl designed to be used to make the lather and then take it right on my face.

    Your choice, I use a separate soap dish but face lathering works as, I assume building the lather direct in the soap bowl would but it would need to be deep enough and you'd probably get through more soap than is strictly necessary. I don't know about this third as I've never tried it. There are some good lather making tutorials in the Wiki and good lather is a very important part of achieving a good shave.


    In general I'm having problems shaving without cutting myself and the razor is dragging a lot which is why I'm worried its not sharp. I've looked through theforums and other web sites but haven't been able to find the answers. I'm hoping someone with experience can shed some light for me.

    Try experimenting with the angle of the blade. That thirty degrees was less than I thought, one and a half to two spine widths off the face. Bring it even flatter to the face if going across or against the grain. Also, minimal to no pressure should be used.

    Thanks!
    Hope this helps and welcome. Don't give up and keep asking questions. It's a great bunch of lads and lasses here that have helped me immensely with their generosity.
    Last edited by AlanII; 08-19-2009 at 05:40 AM.

  5. #5
    Senior Member BHChieftain's Avatar
    Join Date
    Mar 2009
    Location
    San Jose, CA, USA
    Posts
    509
    Thanked: 108

    Default

    Quote Originally Posted by JasonMurph View Post

    My razor was sharpened prior to when I bought it but I'm worried its not sharp enough. How do I know if its sharp enough?

    Thanks!

    Per the advice listed, I'd just send it to one of the honemeisters here to get it sharpened to elimiate that variable.

    There are several tests for sharpness which you can find in the wiki, but the simplest one that I use is will the blade shave dry arm hair when it the edge is held about a 1/4 inch above the skin-- you should hear "pinging" sounds and see a bunch of hair fall onto the blade. Note, at this point the edge could still be in not-so-great-shape in terms of smoothness, but it will give an indication if the edge is keen enough.

    -Chief

  6. #6
    Member Moonhowl's Avatar
    Join Date
    Apr 2009
    Location
    Hemlock, NY
    Posts
    41
    Thanked: 2

    Default Skin stretching makes a huge difference

    After shaving with a straight for about 6 months I discovered what a big difference it makes when you stretch your skin with your other hand.

  7. #7
    Junior Member
    Join Date
    Aug 2009
    Posts
    5
    Thanked: 0

    Default

    Yeah, I think that the blade is not nearly sharpe enough. I just tried shaving and its barely shaving anything. I'm going to try to find the part of the forum and see if I can find someone in NYC to hone it for me.

    Thanks,

    Anthony

  8. #8
    Senior Member Deryan's Avatar
    Join Date
    Aug 2009
    Location
    Wisconsin
    Posts
    507
    Thanked: 75

    Default

    Hi and Welcome to SRP helpful link for yah along with all the great advice :Straight Razor Place Wiki

  9. #9
    what Dad calls me nun2sharp's Avatar
    Join Date
    Feb 2008
    Location
    Kansas city area USA
    Posts
    9,172
    Thanked: 1677

    Default

    Hi Jason, I read your initial post and I am wondering if you are rolling the edge of your razor onto/into the strop, hence the scratches in the leather as well as a dulled blade. Go slow and study your technique, if needed make adjustments. Welcome to SRP
    It is easier to fool people than to convince them they have been fooled. Twain

  10. #10
    BF4 gamer commiecat's Avatar
    Join Date
    Jan 2009
    Location
    Gainesville, FL
    Posts
    2,542
    Thanked: 704

    Default

    Quote Originally Posted by JasonMurph View Post
    Yeah, I think that the blade is not nearly sharpe enough. I just tried shaving and its barely shaving anything. I'm going to try to find the part of the forum and see if I can find someone in NYC to hone it for me.

    Thanks,

    Anthony
    There was a thread about a NYC meetup between a few members here:
    http://straightrazorpalace.com/get-t...-7th-11th.html

    That should give you some info on active members in the state.

    In addition, there is a member map located here:
    http://straightrazorpalace.com/vbgooglemapme.php

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •