Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Junior Member Speakeasy's Avatar
    Join Date
    Jun 2009
    Posts
    9
    Thanked: 0

    Default Chosing a razor.

    Hey guys, I'm about to enter the world of cut throat shaving and need some advice about the two blades I'm considering to buy. They're both 6/8'' Dovo's but one is 1/2 hollow ground and the other is full. Any other suggestions are appreciated, I'm planning to buy a SR set to start off.


    1. 1/2 hollow:Vintage*Blades*LLC*::*Dovo...
    2. Full:Vintage Blades, Dovo
    Last edited by Speakeasy; 06-01-2009 at 01:34 AM.

  2. #2
    Comrade in Arms Alraz's Avatar
    Join Date
    Nov 2008
    Posts
    976
    Thanked: 332

    Default

    Any of these razors should fit the bill. I personally like the 1/2 ground better but as I say, this is a matter of personal preference. Only make sure that they the whatever you buy is in shave ready condition. I think the link at the bottom for a 5/8 though but probably also available in 6/8. Happy shaving.

    Al raz.

  3. The Following User Says Thank You to Alraz For This Useful Post:

    Speakeasy (06-01-2009)

  4. #3
    Don
    Don is offline
     
    Join Date
    Mar 2007
    Location
    Ohio
    Posts
    2,410
    Thanked: 213

    Default

    I would recommend the full hollow. More feedback for a noobie.

  5. The Following User Says Thank You to Don For This Useful Post:

    Speakeasy (06-01-2009)

  6. #4
    Senior Member sbrouwers's Avatar
    Join Date
    Jan 2009
    Location
    Woodward, OK
    Posts
    875
    Thanked: 348

    Default

    Quote Originally Posted by Don View Post
    I would recommend the full hollow. More feedback for a noobie.
    +1 Full hollow is a good first blade then get the 1/2 for you second

  7. The Following User Says Thank You to sbrouwers For This Useful Post:

    Speakeasy (06-01-2009)

  8. #5
    Shvaing nut jbcohen's Avatar
    Join Date
    Jul 2007
    Location
    Palanthas
    Posts
    664
    Thanked: 38

    Default

    Staying out, letting more knowledgeable folks answer the questions.

  9. #6
    Renaissance Man fritz's Avatar
    Join Date
    Jan 2008
    Location
    Richardson, Texas
    Posts
    261
    Thanked: 45

    Thumbs up

    Quote Originally Posted by sbrouwers View Post
    +1 Full hollow is a good first blade then get the 1/2 for you second
    My vote also. I'm also partial to 6/8 and round points, as both of these are.

    Your first shaves should concentrate on technique, and getting a comfortable DFS by going mostly WTG first, then a little XTG; and the full hollow somehow seems to make this easier. After MUCH experience, you may want to get BBS, which will often require ATG in some areas. The 1/2 or 1/4 hollow razor will be stiffer, and easier to go ATG without jumping. It's usually easier to control a stiffer razor around the nose and upper lip corners, especially when going ATG.

  10. The Following User Says Thank You to fritz For This Useful Post:

    Speakeasy (06-01-2009)

  11. #7
    The original Skolor and Gentileman. gugi's Avatar
    Join Date
    Aug 2007
    Posts
    17,410
    Thanked: 3906
    Blog Entries
    1

    Default

    welcome to srp

    i'd go with the full hollow - it's a stiff full hollow anyways
    many people though find stiffer edges to make the learning curve shallower, but more feedback helps developing good technique.
    either one would work fine.

  12. The Following User Says Thank You to gugi For This Useful Post:

    Speakeasy (06-01-2009)

  13. #8
    Junior Member Speakeasy's Avatar
    Join Date
    Jun 2009
    Posts
    9
    Thanked: 0

    Default

    Awesome, thanks guys.

  14. #9
    Now if I could just find a midget.. Joeman's Avatar
    Join Date
    Jan 2009
    Location
    Raleigh, NC
    Posts
    356
    Thanked: 66

    Default

    Great advice from some very knowledgeable folks, one question, do you have a strop? If not, you may look into purchasing one of those as well as you will need it after your first shave.

    Enjoy,

    Joe

  15. #10
    Now if I could just find a midget.. Joeman's Avatar
    Join Date
    Jan 2009
    Location
    Raleigh, NC
    Posts
    356
    Thanked: 66

    Default

    Very nice. I believe you will be very happy with the product and service at SRD. Just a thought, you might look at finding a "used" strop as when starting out most folks, including myself, nick the strop while learning..I still do Your SRD strop is top notch. You can find some on the classifieds for a very fair price. Again, just a suggestion.

    Enjoy

    Joe

  16. The Following User Says Thank You to Joeman For This Useful Post:

    Speakeasy (06-01-2009)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •