Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Member GuybrushThreepwood's Avatar
    Join Date
    Nov 2008
    Posts
    50
    Thanked: 0

    Default Protecting Goldwash

    What's the best way to protect/prevent decay of the goldwash on a blade.
    On my Dovo Special the goldwash on the blade is already starting to get some faint spots on it after only a couple of uses.
    I would post some images, but I'm not really sure how to, I tried it in another thread and they didn't appear.

  2. #2
    Member
    Join Date
    Jan 2009
    Location
    UK Midlands
    Posts
    70
    Thanked: 11

    Default

    First and foremost, don't even think of cleaning it with any metal polish or abrasive. It is microscopically thin and will disappear in an instant. Having said that, I found some stubborn water spot stains on my Dovo that I carefully removed with metal polish - just avoided the fancy bits! Longer term, meticulous cleaning and drying (I clean mine immediately after shaving and then allow to dry open to air currents (safely stored) for 12 hours or so before putting back in rather a nice wooden, velvet-lined box).

    Hope this helps.

  3. #3
    Large Member ben.mid's Avatar
    Join Date
    Aug 2008
    Location
    Oxfordshire, England
    Posts
    3,096
    Thanked: 763

    Default

    As Moggs advised, it'll come off very easily, so the best thing to do it ensure no further deterioration. Even after a wipe down I leave my razors to air overnight after an evening shave. Many of the guys use a light coat of oil. Camellia oil is natural & should be ok with your skin. If you've got skin like leather then you may get away with mineral oils. Whatever you use, just wipe it off before you shave.

  4. #4
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    I haven't bought the stuff yet but I have read great things on Renaissance Wax. It may be a good thing for both the blade and for wood scales. I do know that Windex or a similar glass cleaner is recommended for cleaning gold plated Gillette DEs without damaging the plating or the lacquer.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  5. #5
    Senior Member singlewedge's Avatar
    Join Date
    Sep 2008
    Location
    PDX
    Posts
    1,568
    Thanked: 203

    Default

    Just a thought but would Gold Leaf sealer be of use?

    Its use is to seal the area once the leaf is applied. Just google Gold Leaf and you should be able to find the sealer.

  6. #6
    Member GuybrushThreepwood's Avatar
    Join Date
    Nov 2008
    Posts
    50
    Thanked: 0

    Default

    Alright, so careful cleaning, without any soaps/ polishes that could damage it, and make sure to let the blade dry thoroughly.
    What about getting rid of a few watermarks on the blade? Windex? Clean it under the tap again, and let it dry properly?

  7. #7
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    Goldwash aside, I rinse the blade only in hot water (not the scales) and wipe it with a tissue. I strop a dozen round trips on the horse to get any micro gunk out of the striations. Then I wipe the blade, tang, monkey tail with a soft cloth with some rust preventative.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  8. The Following User Says Thank You to JimmyHAD For This Useful Post:

    GuybrushThreepwood (02-15-2009)

  9. #8
    The Hurdy Gurdy Man thebigspendur's Avatar
    Join Date
    May 2005
    Location
    New Mexico
    Posts
    32,736
    Thanked: 5016
    Blog Entries
    4

    Default

    Personally, I hate gold wash. Its for display razors not a working razor. if you use it on a regular basis it will fade. Its probably best to just accept that and move on.Yea I know some guys will say they have 50 year old blades and the wash is like new but to me its not worth the effort trying to preserve it.
    No matter how many men you kill you can't kill your successor-Emperor Nero

  10. The Following User Says Thank You to thebigspendur For This Useful Post:

    Buddel (02-16-2009)

  11. #9
    Senior Member leadduck's Avatar
    Join Date
    May 2007
    Location
    Concord, NH
    Posts
    1,287
    Thanked: 274

    Default

    Quote Originally Posted by ben.mid View Post
    As Moggs advised, it'll come off very easily, so the best thing to do it ensure no further deterioration. Even after a wipe down I leave my razors to air overnight after an evening shave. Many of the guys use a light coat of oil. Camellia oil is natural & should be ok with your skin. If you've got skin like leather then you may get away with mineral oils. Whatever you use, just wipe it off before you shave.
    What about WD-40? It works great for everything else. Has anyone tried it on their blade?

  12. #10
    zib
    zib is offline
    Hell Razor zib's Avatar
    Join Date
    Nov 2008
    Location
    Jacksonville, Fl.
    Posts
    5,348
    Thanked: 1217
    Blog Entries
    4

    Default

    WD-40 is a bad idea. Although it's good on metals, it's bad on scales. It can actually eat through some. Also, if you get any in the pivot pin, it'll only gunk it up later with hair, dust, dirt, dna, blood, etc...you get the idea. Plus, your bathroom will smell like a garage. I know the Camelia oil can be pricey, You can use regular old Wahl Clipper oil available at Wal Mart, which is nothing more than mineral oil. It's fine for your blades and harmless to your skin.....Rich

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •