Page 1 of 3 123 LastLast
Results 1 to 10 of 22
  1. #1
    Member
    Join Date
    Jun 2008
    Posts
    34
    Thanked: 0

    Default Re: size (5/8, 6/8,.....)

    I would like to start shaving with a straight. Are there any discussions/threads you could recommend discussing the pros and cons of the different widths? I have come across mentions of stability vs maneuverability but couldn't find a a solid discussion of the topic. Thanks.

    Dave

  2. #2
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    26,948
    Thanked: 13221
    Blog Entries
    1

    Default

    There are tons of these in this forum (Newbies)

    Really either size would be fine...
    I always recommend the same starting razor:
    Carbon Steel, 6/8 round point 1/2 hollow grind...

    This is a dead center razor size wise and grind wise so you can decide which direction you would want to go after you gain some experience...
    Also the 6/8 size is slightly easier to strop when you are first starting...

  3. #3
    Junior Member
    Join Date
    Jan 2009
    Posts
    23
    Thanked: 0

    Default

    So would you recommend this razor Vintage*Blades*LLC*::*Dovo... ? For a beginner...because I was either going to get the 6/8 or the 5/8. But I wasn't sure of the big difference.

  4. #4
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    26,948
    Thanked: 13221
    Blog Entries
    1

    Default

    Yes great starting razor there, it is a full hollow grind, there is another 6/8 Dovo that is just a hollow grind too, for about the same price.. I am sorry I don't have the link....
    But yes that is a perfect first razor either way you go, Please Please make sure you either buy with the honing service, or send it to any of us here that do honing so you get it shave ready....

    PS: Now I do have the link TY Raidel

    http://vintagebladesllc.com/vshop/xc...cat=132&page=1
    Last edited by gssixgun; 01-09-2009 at 11:52 PM.

  5. #5
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    Quote Originally Posted by Raidel View Post
    So would you recommend this razor Vintage*Blades*LLC*::*Dovo... ? For a beginner...because I was either going to get the 6/8 or the 5/8. But I wasn't sure of the big difference.
    That is a good one. I am with Glen on the 6/8. I like the slightly larger blade. Whichever you get make sure to go for the honing option.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  6. #6
    Comrade in Arms Alraz's Avatar
    Join Date
    Nov 2008
    Posts
    976
    Thanked: 332

    Default

    Glen makes a solid recommendation. This one is extremely funny indeed... ;-) I am not going to say who recommended this razor originally ;-). Yes, there are many threads discussing the widths. Here is one: http://straightrazorpalace.com/razor...6-8-7-8-a.html

    Al raz.

  7. #7
    Super Shaver xman's Avatar
    Join Date
    May 2005
    Location
    Lotus Land, eh
    Posts
    8,194
    Thanked: 622

    Default

    Most guys are comfortable starting with a 5/8 or a 6/8. Get a notch, Spanish or French point if you can. Stay clear of the round points. A spike is much better to learn on. Just like driving a stick shift, once you learn, you'll wonder why others bother with round points.

    X

    PS I also prefer half hollows like Glen.

  8. #8
    Member
    Join Date
    Jun 2008
    Location
    Raleigh, NC
    Posts
    61
    Thanked: 9

    Default

    I highly recommend a 5/8 or 6/8 to start and use a round point. WHen I was fist leaning, I constantly cut myself at the ears using a spike or square point. I think when learning try to eliminate as many potential hazards as possible, and a round point reduces the potential for gouges and cuts. It is one less thing to worry about and focus on.

    Even now when I use a pike point I still occasionally cut myself at the ear (I wear glasses when shaving so my peripheral vision gets somewhat disrupted) and I have to be VERY careful with a spike or square point.

    Just my personal opinion.

  9. #9
    Super Shaver xman's Avatar
    Join Date
    May 2005
    Location
    Lotus Land, eh
    Posts
    8,194
    Thanked: 622

    Default

    Quote Originally Posted by Garrett View Post
    I highly recommend a 5/8 or 6/8 to start and use a round point. WHen I was fist leaning, I constantly cut myself at the ears using a spike or square point. I think when learning try to eliminate as many potential hazards as possible, and a round point reduces the potential for gouges and cuts. It is one less thing to worry about and focus on.

    Even now when I use a pike point I still occasionally cut myself at the ear (I wear glasses when shaving so my peripheral vision gets somewhat disrupted) and I have to be VERY careful with a spike or square point.

    Just my personal opinion.
    I have found the opposite. With the round point, I can't tell where the edge finishes and I tend to get a nick from it especially as I try to shave around my nose. To each his own I guess.

    X

  10. #10
    Senior Member Big Red's Avatar
    Join Date
    Oct 2007
    Location
    Fresno, CA
    Posts
    1,068
    Thanked: 130

    Default

    I started with a round, the transition to spike did get a few nicks. I'd say get a spike with a gently rounded tip, or gently round it yourself. the round does have the problem of it doesn't end quite right. I have a couple in the shaving rotation, but with they had a different point style.

    Red

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •