Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17
  1. #11
    yeehaw. Ben325e's Avatar
    Join Date
    Jul 2008
    Location
    Greenville NC
    Posts
    512
    Thanked: 213

    Default

    I bought just an old linen strop and cleaned it up. I chrome ox'd it and it works great for touchups.

  2. The Following User Says Thank You to Ben325e For This Useful Post:

    mziter (11-14-2008)

  3. #12
    Member gingahippy's Avatar
    Join Date
    Oct 2008
    Location
    Croatia and UK
    Posts
    94
    Thanked: 16

    Default

    I've just put Cro Ox (waxed block shavings melted in Neat'sfoot oil) on one side of my linen strop and it works great. before I had rubbed the hard wax block into the linen but it made a thick layer that cracked in the cold and stuck to fibres giving an uneven surface.

    With a little of the oily mix rubbed lightly across the top of the linen it soaks in evenly and works a treat, just got my four best razors sharper than ever using this method.

    I rubbed the back of the razor up and down to smooth it into the fibres.

    WARNING, apply thinly with feather light strokes or it will go through to the other side of the linen.

    I reckon I'll make up a small bottle of the green oily mix to apply as needed, the green block is not so great on it's own.

  4. The Following User Says Thank You to gingahippy For This Useful Post:

    mziter (11-14-2008)

  5. #13
    Member
    Join Date
    Oct 2008
    Location
    Troy, NY
    Posts
    85
    Thanked: 3

    Default So where is a good place to get some CrOx Powder?

    So what store can I purchase some CrOx powder from? Is water/CrOx powder mix still the preferred method for applying the power to linen? If so, what ratio of water to powder should I use?

  6. #14
    Senior Member Mike7120's Avatar
    Join Date
    Mar 2008
    Location
    Kentucky
    Posts
    483
    Thanked: 70

    Default

    Quote Originally Posted by mziter View Post
    So what store can I purchase some CrOx powder from? Is water/CrOx powder mix still the preferred method for applying the power to linen? If so, what ratio of water to powder should I use?
    Chris L might still have some Chromium Oxide powder. I think I paid $4.00 and he gave me enough to paste at least 5 strops. Send him a PM.

    I use neatsfoot oil as a medium, it works great.

  7. The Following User Says Thank You to Mike7120 For This Useful Post:

    mziter (11-15-2008)

  8. #15
    Senior Member Mike7120's Avatar
    Join Date
    Mar 2008
    Location
    Kentucky
    Posts
    483
    Thanked: 70

    Default

    Oh and I forgot to mention, if you buy from Chris L, he sends you instructions on how to mix the powder and also how to apply it.

  9. The Following User Says Thank You to Mike7120 For This Useful Post:

    mziter (11-15-2008)

  10. #16
    Senior Member kahunamoose's Avatar
    Join Date
    Apr 2008
    Location
    Salt Lake City, Utah
    Posts
    277
    Thanked: 47

    Default

    I’ve never used any linen “components” in my sharpening, honing, and stropping regime, so I can’t say it it’s good or bad. As far as CrOx goes, the stuff is dirt cheap. I glued some leather scrap on a wooden kitchen cutting board purchased at T.J. Maxx and ripped it on a friend’s table saw. 2 dirt cheap paddle strops. CrOx + a little neatsfoot oil gives you the equivalent of very high grit 30,000+ honing stone, almost literally. It will make all the difference in your sharpening and leave your linen to do other things with. Results that will blow you away and did I mention – Dirt Cheap? Remember, if it’s too good to be true it probably is not – This does NOT apply here! How many times in life does that happen?

  11. The Following User Says Thank You to kahunamoose For This Useful Post:

    mziter (11-15-2008)

  12. #17
    Member
    Join Date
    Oct 2008
    Location
    Troy, NY
    Posts
    85
    Thanked: 3

    Default I forgot!

    I forgot I won a "selective" leather and canvas on ebay and figured it was a piece of junk. Do you think it would be alright for the CrOx? I can post a picture if you want but I think you guys probably already know of there quality.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •