Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Member shampoo's Avatar
    Join Date
    Oct 2008
    Posts
    30
    Thanked: 3

    Default Introduction and my First Shave

    Hi,

    I'm Justin.

    I purchased a Dovo from Straight Razor Designs as well as a new brush and some good creme.. I also got some pre-shave from Proraso. I've been a Mach 3 user for a long time and got tired of paying out the nose for those blades!

    I read as much as I could, especially about starting slow. I must say, it's a bit awkward handling that thing.. I decided to just do one pass down the side of the face. I took my time and let the razor do the work as opposed to pushing it or putting too much pressure on the blade.

    End result ? One very, very small nick at the start of the run but it was FAR from a close shave.. So I went for a second pass.. slightly better. I then just tried my cheek which went much better. But still, I wouldn't call it anywhere near as good as with the Mach 3. My thinking is it wasn't angled enough.. I was probably too worried about going too perpendicular to the face and as a result, the razor was too flat..

    That's when I saw the very tiny small drop of blood and figured I'd better call it a day as any other parts of my face will be tougher and I have yet to master the easiest part..

    So any ideas what I need to do before the next time (still waiting for the strop) before I try the same pass ? I'm going to watch a few more videos again to be sure.. But I appreciate all comments.

    Thanks!

    J
    Last edited by shampoo; 10-30-2008 at 11:29 AM.

  2. #2
    Interweb Researcher
    Join Date
    Oct 2008
    Location
    Buffalo, NY
    Posts
    61
    Thanked: 1

    Default

    I'm a beginner myself, but I have 1 question for you. Did you have your new dovo honed professionally?

    If it's just a new dovo it's highly recommneded you get it honed as it isn't sharp enough to be shave ready from the factory.

    If you already had this done, disregard this

  3. #3
    Member shampoo's Avatar
    Join Date
    Oct 2008
    Posts
    30
    Thanked: 3

    Default

    Quote Originally Posted by mademperor View Post
    I'm a beginner myself, but I have 1 question for you. Did you have your new dovo honed professionally?

    If it's just a new dovo it's highly recommneded you get it honed as it isn't sharp enough to be shave ready from the factory.

    If you already had this done, disregard this
    Yes, it came "shave ready" from Straight Razor Designs.. So I am going to assume yes. ;-)

    J

  4. #4
    . Otto's Avatar
    Join Date
    Sep 2008
    Posts
    3,754
    Thanked: 3708

    Default

    It's probably your technique that isn't up to par yet. Thing takes time.
    Be patient.

    If you haven't done so: Order and watch Lynn's dvd.
    Also read: Moss, Christopher. "The Art of the Straight Razor Shave."
    "The Art of the Straight Razor Shave." you will find in the Wiki


  5. #5
    Senior Member dward's Avatar
    Join Date
    Aug 2008
    Location
    Germantown, MD
    Posts
    1,686
    Thanked: 245

    Default

    +1 with Otto. Don't be in a hurry. Your technique will develop with time. Don't expect that BBS for a bit. And work only WTG until you are comfortable manipulating the blade and getting your angle right...

    Patience...

  6. #6
    Member shampoo's Avatar
    Join Date
    Oct 2008
    Posts
    30
    Thanked: 3

    Default

    Thanks for the tips thus far..

    I'm in no rush. If I had been, I would have made a bloody mess! ;-)

    But when you say "technique", that's a bit vague for me. What do you think I'm doing wrong ? My thinking is I didn't angle the razor enough.. It just sorta bumped along my face not cutting much.

    I'm sure you've all seen this video: YouTube - Straight Razor Shave
    see how he doesn't do one long stroke at the start ? He starts, stops and then starts a little lower but he covers some areas twice.. Is that OK ? I feel if I tried that, I'd have a bit more control..

    But looking at other videos and the Art of Shaving PDF, they appear to be doing one long stroke..

    Thanks!

    J

  • #7
    Senior Member JCitron's Avatar
    Join Date
    Mar 2008
    Location
    Tallahassee, FL
    Posts
    358
    Thanked: 43

    Default

    I'd say you had a pretty good start. You started with the easier parts and took it slow. Technique comes with practice, that's why it is recommended that you start with just the cheeks and sideburns, that way by the time you move on to the tougher parts you have a pretty good technique.

    I know when I first started everything felt wierd, holding the razor felt off, the angles I was using seemed wrong, for me I think it was just the fact that I wasn't yet comfortable with holding this extremely sharp tool to my face. But with time I felt more comfortable with it and as a result my technique improved. Even now, after some months, I can get a BBS shave on the cheeks but my neck technique still needs some work.

    As far as advice goes. A strop will make all the difference, as will proper beard prep. Also, if your skin isn't used to such a sharp blade you may want to let it rest a couple days. I see a lot where people keep trying every day and wonder why their shave gets worse each time.


  • #8
    Member
    Join Date
    Mar 2008
    Posts
    42
    Thanked: 2

    Default

    Some people prefer one long stroke, others prefer small short strokes. I personally prefer the latter as it allows you to readjust where you're pulling your skin to make it tighter. Just take your time, the first time I tried straight shaviing, I had unshaved hairs all over the place and I looked absurd. Just give your muscles time to figure out the right pressure and angle to hold the razor. You'll know when you're doing it right because the hairs will just come off effortlessly.

  • The Following User Says Thank You to KingHarvest For This Useful Post:

    shampoo (10-30-2008)

  • #9
    Member shampoo's Avatar
    Join Date
    Oct 2008
    Posts
    30
    Thanked: 3

    Default

    [quote=KingHarvest;275951 You'll know when you're doing it right because the hairs will just come off effortlessly.[/quote]

    Ah ha, yes this I know because when I go to the barber and they shave my sideburns, it always amazes me how little effort is required to move the razor.

    I'm going to try the short little strokes.

    I REALLY appreciate the reply. Thanks!

    J

  • #10
    Junior Member
    Join Date
    Sep 2008
    Posts
    9
    Thanked: 1

    Default need the strop

    I've only been doing this about a month, but can tell you this. You absolutely need to strop the razor before every use. Hopefully you have had the razor hand honed, either from where you purchased it or from a professional. This is very important since no razor is actually shave ready from the factory unless it has been pre honed. This gets it razor sharp but still not sharp enough. to be absolutely shave ready you need to strop the razor before each use. This realigns the micro serrations on the blade, which are essential in getting a good shave. I suggest buying Lynn Abrams shaving DVD. though when you first start watching you may think.. This is a guy at his house with his buddy taping this, I say so what. He knows a hell of a lot about shaving, and if you want to experience a good one listen to what he has to say. I also own a Dovo razor the cheapest one you can buy, and I get a great, close, irritation free shave every time.. I actually shave more ofter now than I did before, because I enjoy it that much. even though I actually need to shave less. if that makes any sense.. Hope this helps a little, but definetly wait till you get the strop before you try again. Good luck.

  • Page 1 of 3 123 LastLast

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •