Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: A Humble Hello

  1. #1
    JDB
    JDB is offline
    Junior Member JDB's Avatar
    Join Date
    Sep 2008
    Posts
    3
    Thanked: 0

    Default A Humble Hello

    Hello Everyone!

    I am absolutely honored to be amongst such enthusiast! I do apologize though, this is the second time I've tried to post this thread after the first one was deleted from being timed out.

    So let me start from the beginning. I have always had an interest in straight razors, but my enthusiasm was brought on by Tim Burton's 'Sweeney Todd'. As cliché as that might be, I became obsessed. I devoured the history of razors, I researched everything about them. I read website after website, blog after blog, following forum conversations about people using them and what they where using, watched all kinds of youtube video's about honing and stroping. I agonized every night on ebay, debating what to buy, should I buy. I didn't want to rush out and buy a blade only to find that I didn't know how to use it, that I didn't like it, that it was just another passing obsession. I decided to wait, be patient, keep watching, learning, obsessing, until one day my moment came. I was visiting a friend out of town when he surprised me with fathers antique blade. It wasn't much, but it was everything I had dreamed of. It had no nicks or visible damage, a little "corrosion" at the base between the joints of the handle and blade and obviously dull, but other wise perfect. I put it away dreaming of using it, patiently waiting on the perfect hone. Wondering if it was something I could actually see myself using. I decided to go for it and bought a 220/1000 grit Norton water stone and a vintage strop from ebay. Two separate auctions with a total around $100. My strop arrived first with the hone the following night. I was so excited, and nervous all at the same time. I had read all the material and seen enough of the "how-to" video's on youtube, I was ready...or so I thought. I honed for about 10 minutes on the 220 then flipped over and hone another few minutes on the 1000. I stropped about 10 strokes and the time finally came. My first though as I stroked for the first time was "I have a lot to learn". I could feel the hair being pulled out! I have never had razor burn so intense...

    I have since shaved a few more times, that was about two to three weeks ago. I continue to learn, I continue to fall in love with my blade. I wanted to share my story, my routine, some troubles and ask a few questions. I love this site, I learned a lot by reading the posts and wanted to finally join in on the conversations. Hopefully I'll post some pictures later of my equipment that way you guys can get a better look at what some of the problems I might run into. As for now I'll share my routine...

    I first start off with honing. I hone every time, before I shave. I set my stone on top of the plastic box it came in and place it right under the faucet with a very small stream of warm water always running to keep a thin layer on top. I hone for about five to seven minutes on the 1000 grit side. I know I need to buy a 4000/8000 grit stone, hopefully soon! I test the blade on my thumb nail. Once I feel a consistent sharpness I set the stone next to the sink to air out a bit. I then strop. I keep the strop very tight and run the blade with the spine leading for about 10 strokes. Now I do the hanging hair test, only I keep my hair very short and don't have any to pull, so what I've been doing is using a thread from my wash cloth, granted that is thicker and occasionally I'll use a cat hair (God knows its everywhere Most of the time the hair/thread splits after a moment running on the blade, I have yet to have a hair cut on impact. I think thats because I don't have a higher grit hone- yet. I moist my face with warm water and lather with canned foam for sensitive skin. I start the shave on my right side going down to the neck line all the way over to the left. I re-lather then shave from bottom of neck to jaw line. The chin and jaw are tricky and I haven't gotten that down yet. I also haven't been able to go against the grain on my cheeks yet because I don't have the skill or the treated skin. Once all that is done I moist with warm water again and run my schick razor just to clean up. Dry off apply Old Spice after-shave and jump in the shower. I know I should shower first, but thats just my O.C.D.

    Once in a while I'll run the blade on the other side of the strop after I shave, but I'm not really sure what that is doing...I just read its a good thing to do? I have some questions about proper cleaning, the stone and blade, etc. And I didn't know if I should use some kind of oil to soften the strop. Also I don't have a brush right now either and was wondering who makes a quality brush-bowl set?


    I think thats enough for right now, this post has gone on way to long! Thanks again for reading and I can't wait to hear from you!!
    Last edited by JDB; 09-05-2008 at 09:14 PM.

  2. #2
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    26,948
    Thanked: 13221
    Blog Entries
    1

    Default

    Welcome to SRP, Great to have you aboard the straight train....
    I moved this to the Newbie Forum for you where you will get way more attention...
    I gotta give credit where credit is do here first, the fact that you are getting even a shave at all off the 1k is a testament to foritude....
    Trust me when I say this, it is going to be a lot better as you progress on this fun journey.....
    You need to do some reading on here and watch some of the video's and I am sure you will have tons more questions....

  3. #3
    Senior Member blabbermouth ChrisL's Avatar
    Join Date
    Oct 2007
    Posts
    4,445
    Thanked: 834

    Default

    Welcome to the site. Obsessed with razors? Really? I can sympathize.

    Don't take this the wrong way; you do need to read more and spend more time here on SRP. Unless a razor has chips to the blade or is so terribly pitted at the edge that a person feels they need to remove a serious amount of metal, the 220 grit Norton side shouldn't be used.

    You should never ever need to hone a razor prior to each shave and most certainly not on an aggressive grit like 1K. I fear if you continued your current regimen, you'd quickly tire of shaving this way and abandon it all together. I easily shave with each razor I hone for 30+ days to several months using only pre and post shave stropping. And only then do they need a small number of passes on a very high grit stone.

    I understand and can empathize with your excitement. But your current approach is not yielding a comfortable shaving edge. Ouch.

    Very serviceable to high end brushes can run you anywhere from $15-hundreds of dollars. It depends on your budget.

    Keep reading, keep posting and keep immersing yourself in this. Then it'll take hold of you like a monkey on your back and you'll find yourself past the point of no return.

    Chris L
    "Blues fallin' down like hail." Robert Johnson
    "Aw, Pretty Boy, can't you show me nuthin but surrender?" Patti Smith

  4. #4
    Senior Member Ditch Doc's Avatar
    Join Date
    Aug 2008
    Location
    Winston-Salem, NC
    Posts
    474
    Thanked: 66

    Default

    I think your next purchase should be for a Norton 4K/8K and a Chinese 12K. Sounds like you're doing a good job honing, but you need higher grits. As for the strop, if one side is linen, you can use it first, then the leather..the linen is like a micro hone. I usually strop 20 linen and 25 leather. But many do it lots of different #s of reps. Vulfix makes some nice inexpensive brushes, and I like the Georgetown pottery scuttle.

  5. #5
    yeehaw. Ben325e's Avatar
    Join Date
    Jul 2008
    Location
    Greenville NC
    Posts
    512
    Thanked: 213

    Default

    JDB, I commend and applaud your efforts!! The straight shaving bug has definitely bit, and I think that's great.

    Your stone selection, however, is pretty bad off. the 220/1000 grit stone will be great for when you buy razors off of ebay with chips and nicks in the edge, but for shaving it's only the beginning of a sharpening regimen. I'm a frequent visitor of Knifeforums.com, and in the "Kitchen knife " section, we usually reccomend that a 1000 grit edge is a sufficient edge for a kitchen knife..... For a shaving edge you'll ahve to go much finer.

    I only have the stones that I need, so I have no extra's, but if anyone has any spare hones (barber hones? medium and fine?), I'd like to nominate JDB for a "pay it forward" if you have anything suitable that you can easily part with.... His exuberance in attempt earns it, I would say!

    Other than that, JDB, I'd be more than happy to hone your razor for you. I'll polish it on stones up to a 12000 grit stone, then micron papers followed by 0.5 micron chromium oxide. I'm not a pro like some of the guys on the forum, but I get fantastic shaves from the razors that I have, and the edge is long lasting, providing you strop correctly. PM me if you're game. I'll send your razor back to you with a chromium oxide loaded bench strop of some sort if you like. Actually, I'll give a hunk of a chromium oxide bar.... I've got a bar that I've been using for over a year and I've barely dented it... Or just buy some more hones and do it yourself!!

    As far as a brush goes - for right now just go to walmart and buy the Van Der Hagen brush ($4.99) and the soap ($1.99). I'm still using that and I get fantastic shaves with it!

    Here's a practically fail-safe recipe for decent lather from that set:

    1. Put the soap puck in the bottom of a coffee mug.
    2. Fill the mug with very hot water.
    3. Put your brush bristle side down in the water.
    4. Strop your razor (try more in the 30 - 50 range: it's easy to mess up your edge with poor stropping technique, but if you've watched a few videos on youtube you should have a decent idea of what good technique looks like. It's difficult to over strop. So, in your case, a bunch of strokes is better than too few, which I would say that 10 passes is too few for now...)
    5. Dump the water out of the mug, and give your brush a good flick or two to get the excess water out. Just so it's not dripping a lot. A few drips is normal and fine.
    6. Swirl the brush around on the soap, and pump it up and down a few times. For 20 seconds is more than plenty.
    7. Wet your face.
    8. swirl the brush around on your face, wipe it back and forth, jiggle it, whatever you need until the foam turns into a good thick lather. Finish off with "paintbrush" style strokes to make it even.


    When I first started, I had a problem with my lather drying on me, because I wasn't a quick shaver. So, I broke it up into left cheek, right cheek, left neck, right neck, and upper lip/chin area. I would lather a section, then shave, then lather the next section, then shave, etc.

    I recommend lathering on your face to start with because it's easy to feel what the lather is like, rather than just looking at it in your mug/bowl.

    Good to have you @ the forum!

    Ben

  6. #6
    JAS eTea, LLC netsurfr's Avatar
    Join Date
    Sep 2006
    Location
    Burke, VA USA
    Posts
    1,301
    Thanked: 110

    Default

    I applaud your enthusiasm! However, your post made my face hurt. Shaving off of a 1K hone even after a strop is the mark of a real man. However, you are not going to have much metal left after a time and your shaves will not be as comfortable as they could be. As others have suggested, you really need to get a different selection of finer hones. I have blades that have not seen a more coarse hone than a yellow coticule about once every 3-6 months for over two years. There are some great tutorials here on the forum and elsewhere on how to hone and maintain your blades.

  7. #7
    JDB
    JDB is offline
    Junior Member JDB's Avatar
    Join Date
    Sep 2008
    Posts
    3
    Thanked: 0

    Default

    WOW!

    Thank you all so much for your advice and support! I have never been on a forums board that has been this welcoming! I do apologize for the delay in response. I was away from home this weekend and couldn't get on a computer.

    First off, Chris, thanks for the metaphor of a monkey on my back, that made me laugh. I'll be sure not to remember that when I'm actually shaving! Ditch doc, thank you for the advice about the brush. I'll definitely be looking in to that. And Ben, thanks again for willingness to help me out. I don't know if I'm able to part with the blade just yet, but I will most surely keep you in mind!

    While I was away this weekend, I had time to think about some questions to ask you guys. When- why- and how did you get into straight razors? For me it was the fact that a pack of razors cost around $10-$15! I didn't want to keep throwing my money away. Not to mention Gillette and Schick are monopolizing this generation with advertising. I didn't want to be dependent on the latest and greatest vibrating blade they have to offer!

    But I digress...

    I couldn't wait to get back home so I could share with you some decisions I've made. One, I'm looking on ebay at a Norton 4000/8000 grit water stone for $89. What do you guys think? Is this REALLY going to change my shave? Is it really worth almost a hundred dollars?! I just graduated college and I'm getting by okay, I just want to know how much of a difference its going to be...Two, I am going to stop honing before every shave. I can completely see why I shouldn't hone each time, I was just uneducated. Thank you for putting a stop to that! And three, I've decided to stick with my foam for right now as my shaving cream. Reason is that I don't really have a problem with it, so why fix what's not broken?

    Now, I do have a surprise! I spent awhile this morning taking pictures of my equipment! They are not the best pictures ever, but I think they get the job done.



    This is the box the blade came in, however I'm not sure if its the right box...



    And this is my blade!



    This is the "corrosion" I was talking about. The bottom of the blade say's "CNTARIO CUTLERY CO. GENEVA, NY"



    It was hard to actually get a shot of JUST the razors edge, but I thought this would suffice.



    My Norton 220/1000 grit stone, with box.



    The top of my strop.



    The bottom. I'm not sure if this is the proper "toughness" of a strop. It's a bit stiff, and I haven't used any kind of oil or anything to loosen it up. What do you guys recommend?

    **SORRY**

    The forums rules say I can only have 7 pictures posted. So I have to post another reply to show the remaining two...

  8. #8
    JDB
    JDB is offline
    Junior Member JDB's Avatar
    Join Date
    Sep 2008
    Posts
    3
    Thanked: 0

    Default

    The rest...



    And the back. Now again, I don't haven't been using this side but a few times, so thank you doc for the advice on using it as a fine hone before and after a shave.



    Then the cream and clean up. Sorry for the blurriness, photographers error.


    So thats all I have for right now, I hope you guys are doing okay and I can't wait to hear back!!

  9. #9
    Never a dull moment hoglahoo's Avatar
    Join Date
    Feb 2008
    Location
    Tulsa, OK
    Posts
    8,922
    Thanked: 1501
    Blog Entries
    1

    Default

    Welcome and congratulations! You appear to have the crazed stubbornness necessary to shave with a straight razor for many years to come

    You can find finer hones and finishing pastes (and brushes!) here in the Classifieds and Vendors sections of SRP and many soaps and creams that will spoil you.
    Find me on SRP's official chat in ##srp on Freenode. Link is at top of SRP's homepage

  10. #10
    JAS eTea, LLC netsurfr's Avatar
    Join Date
    Sep 2006
    Location
    Burke, VA USA
    Posts
    1,301
    Thanked: 110

    Default

    The 1K Norton is a fine hone to establish the bevel on a razor. Once that is done, you should not have to come back to that hone for a very long time; you may never have to come back to it if you keep it tuned up on a finer grit hone.
    I have a 4K/8K Norton but have not used it on my razors that are tuned up where I want them because I use even finer hones to keep them just where I want them on the sharpness scale.
    While I could shave off of the 8K, I never found it really comfortable. I have a yellow coticule that I use that provides a nice polish. When you add some stropping with green CrO before actually hitting the plain leather strop, you can get a very nice shave.
    I have other polishing hones but you don't really need them unless you have had an attack of the hone acquisition disorder (HAD) like I have HAD.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •