Results 1 to 8 of 8
  1. #1
    Grumpy old sod Whiskers's Avatar
    Join Date
    Apr 2008
    Location
    Media, PA
    Posts
    451
    Thanked: 88

    Default Starting from scratch

    So, a few months ago I picked up some Wapi's from wojec (sp?) straight from Poland. I thought these razors would be fun to learn honing due to the fact that they are unused and inexpensive.

    I read up on honing ... over and over ... and decided to start out the bevel with 1000 grit wet/dry paper laid on a piece of marble. I made some passes and thought the bevel was established ... then onto a 12k chinese stone. I know these stones are more for finishing because they cut slowly, so I thought this would be a good time to refine my technique on the stone as well. When I thought the wapi was ready, I took her in for the maiden shave. Man, that hurt alot. It barely cut any hair and left me face stinging for a few days. Thats when I knew something was wrong... so, back to the 12 k for more laps, right ? Right. Whilst on the stone, I became distracted - razor in hand - and dont ya know .. I dropped the razor.

    Luckily I didnt break the blade ... I just found some small nibbles missing on the edge. So, back to the 1000 grit .. grrr ...

    Being peeved at this point, I decide to use some valve lapping compound to establish the bevel. This particular compound is rated at 325 grit. 10 round trips and no nicks in the edge ! WOOT!!! I tested the edge by shaving the arm hair and don't ya know ... those hairs almost jumped off. Onto the 12k for some laps. I could see with the nekked eye how the bevel was becoming polished, so when it looked polished, I gave it another 15 laps or so ... then brought her in for the new maiden shave.

    Shaved up pretty good, but the edge still felt kinda rough. So, I got me a new strap of leather and mink olied it up, tied it to the towel rack and stropped away.

    Thsi morning I had a shave with the blade ... and it was nice and smooth. I actually got a good shave from it !! I only did one pass due to time restrictions and since this (final) honing process, I havent touched me ole disposable once. Actually, I did touch it. I moved it into the hall closet to make room in the bathroom for the Wapi. haha.


    I am confident in stating that this whole process would have taken me alot longer with out the information that is available here !!! This type of shaving always appealed to me and I am having alot of fun with this whole process. Thanks, SRP !!

  2. #2
    Troublemaker
    Join Date
    Apr 2008
    Location
    Modena, Italy
    Posts
    901
    Thanked: 271

    Default

    Yup, 1000 grit abrasive paper -> 12 K stone and valve lapping compound, sounds pretty standard to me. Which forums did you say you read? No offense, just kidding

    Welcome aboard! Be secure in the knowledge that you have started well and that it can only get better (couldn't have been any worse).

  3. #3
    Senior Member Milton Man's Avatar
    Join Date
    Sep 2007
    Location
    Ottawa, Canada
    Posts
    971
    Thanked: 132

    Default

    Congrats on getting a good shave from a rather unorthodox honing progression...but whatever works, eh?

    At least you know one thing - you can get a razor to shave you at a level you're comfortable with. As you get more and more into the hobby, try, at least once, a razor honed by a honemeister to see if there's some more smoothness to be eeked out of your honing - I sure know I have a ways to go!

    Mark

  4. #4
    Senior Member
    Join Date
    Feb 2008
    Location
    Boston, MA
    Posts
    549
    Thanked: 124

    Default

    I can do a pretty OK shave right off a coarse barber hone, but it's not a perfect shave, nor is it a very comfortable shave. The hone leaves big jagged teeth behind, and it feels more like I'm sawing the hairs off than cutting them. But it does work. That's pretty much what you're doing with your lapping compound. (If you're going from lapping compound straight to 12K grit, all you're doing is slightly polishing the scratch pattern left behind by the compound. That jump is too big for the 12K to do much). If you hone in the usual labor-intensive way, you'll get a much finer edge which will produce a more comfortable shave. For the record, tho, when I travel, I only take that one coarse barber hone because it's good enough & I don't want to transport 4 hones. When I'm home, tho, I like the luxury of a finely polished edge.

  5. #5
    Grumpy old sod Whiskers's Avatar
    Join Date
    Apr 2008
    Location
    Media, PA
    Posts
    451
    Thanked: 88

    Default

    In all honesty, I worked on the 12k for almost 2 hours before I was satisifed with the polish of the bevel. Maybe I over did it .. I dont know .. Probably the opposite. ha ha.

    I actually do have a razor that was honed by Lynn, I think. Yeah, it's really sharp. The razor I honed isnt as sharp, but it does the trick. I think I need more stones to establish a better progression. Right now I am just in the beginning stages so I am going slow with buying gear... except for razors (for some reason).

    *whew* There sure is alot to learn about this type of shaving.

  6. #6
    Senior Member
    Join Date
    Nov 2006
    Location
    Las Vegas, NV
    Posts
    153
    Thanked: 17

    Default

    Yeah, some stones in between 1,000 and 12,000 will make your life so much easier. The most common are the Norton or Shapton 4000/8000 grit stones. The Chinese 12k is so slow it would probably take 8 hours to polish out the marks from 325 or 1000 grit.

  7. #7
    Grumpy old sod Whiskers's Avatar
    Join Date
    Apr 2008
    Location
    Media, PA
    Posts
    451
    Thanked: 88

    Default

    jimmieray got me to re-read my initial post.

    Ok, so I forgot to mention the 1000 grit paper between the lapping compound and the 12 k.

    Some of your responses make more sense now.

    Sorry to create any confusion.

  8. #8
    JAS eTea, LLC netsurfr's Avatar
    Join Date
    Sep 2006
    Location
    Burke, VA USA
    Posts
    1,301
    Thanked: 110

    Default

    Welcome to SRP!!!
    Congratulations on your progress to date!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •