Page 1 of 2 12 LastLast
Results 1 to 10 of 19
  1. #1
    Senior Member
    Join Date
    Apr 2008
    Location
    Co Durham UK
    Posts
    201
    Thanked: 15

    Default How sharp should a honed blade be?

    I had my razor honed before it was shipped to me.

    When I got it I tried the HHT. The blade just pushed the hair away.

    Next I tried it on the tips of my arm hair and the result was the same. The blade would only cut at the base of the hair and with some pressure applied.

    I then took a hair and folded it in a loop over the razor's edge. As I lifted the blade I felt the hair stretch slightly then cut. Is this an acceptable level of sharpness?

    I managed to get a pretty decent first shave with it, but having looked at the level of sharpness some are managing to obtain when honing I can't help but wonder.

    I hadn't stropped the blade prior to these tests.

    I have since checked it under a microscope and there is no sign of the blade having been rolled and no burring.

  2. #2
    Cheapskate Honer Wildtim's Avatar
    Join Date
    Nov 2006
    Location
    A2 Michigan
    Posts
    2,371
    Thanked: 241

    Default

    Try those same tests with a single edge razor blade straight from the package, You'll find yor results are similar. The single edge might be a tad sharper though.

    The only test that matters is shaving. If you got a decent shave your first time out, thats pretty darn good. Most guys experience a bit of tugging and pulling, even pain during their first few shaves, and the razor has nothing to do with it. It takes some time to find the best angles, amount of stretch, strokes and grip for a really comfotable shave. Even once you find all of the above it takes a while to get really consistent in your use of all the above for every shave.

    I would keep practicing your shave technique before I blamed my tools.

  3. The Following User Says Thank You to Wildtim For This Useful Post:

    Black Beard (05-18-2008)

  4. #3
    Senior Member
    Join Date
    Apr 2008
    Location
    Co Durham UK
    Posts
    201
    Thanked: 15

    Default

    The shave did not make me question the sharpness of the blade.

    I had read this and that about sharpness of blades in the honing forums before I got my razor, so I thought I would try some of the tests mentioned.

    Hence the above post.

    I had my second full shave today and similar results to my first, so no complaints there.

    I guess I'm just having those newb moments we all have.

    Thanks for setting my mind to rest.

  5. #4
    JAS eTea, LLC netsurfr's Avatar
    Join Date
    Sep 2006
    Location
    Burke, VA USA
    Posts
    1,301
    Thanked: 110

    Default

    Quote Originally Posted by Black Beard View Post
    I managed to get a pretty decent first shave with it, but having looked at the level of sharpness some are managing to obtain when honing I can't help but wonder.

    I hadn't stropped the blade prior to these tests.
    First, I would say that you have done very well to get a good shave on the first time out!

    Second, the hanging hair test is an indicator but not the acid test of shaveability. The shave is the real test.

    You are doing great! Welcome to the world of str8 shaving.

  6. The Following User Says Thank You to netsurfr For This Useful Post:

    Black Beard (05-18-2008)

  7. #5
    Senior Member
    Join Date
    Oct 2007
    Posts
    1,292
    Thanked: 150

    Default

    There are many factors that go into whether a blade will pass the HHT, how fine the hair is, the angle you hold it at, etc.

    If it shaves well, it is sharp enough. And it sounds like yours is just fine! Congrats!

  8. The Following User Says Thank You to Russel Baldridge For This Useful Post:

    Black Beard (05-18-2008)

  9. #6
    Member AFDavis11's Avatar
    Join Date
    May 2005
    Location
    Virginia
    Posts
    5,726
    Thanked: 1486

    Default

    You may also find that improving your stropping technique will get the same blade to pass some of those tests.

    You can get a blade to pass those test after honing but it can also shave worse for the effort.

  10. The Following User Says Thank You to AFDavis11 For This Useful Post:

    Black Beard (05-18-2008)

  11. #7
    Senior Member
    Join Date
    Apr 2008
    Location
    Co Durham UK
    Posts
    201
    Thanked: 15

    Default

    It's amazing how a little bit of reassurance can make you feel better about things, even at the ripe old age of 43 .

    Just as a point of interest, I have managed to aquire a mild dose of RAD.

    I now have my second shave ready razor on it's way to me from 'The Invisible Edge'. It's a vintage Ragg from Sheffield and is a near 7/8 in practically new condition.

    I can't wait to shave with it

  12. #8
    Member AFDavis11's Avatar
    Join Date
    May 2005
    Location
    Virginia
    Posts
    5,726
    Thanked: 1486

    Default

    Thats awesome! You'll find the sharpness requirement will be a little less with a big heavy blade. It'll kind of shave all by itself and then ask for more.

  13. #9
    Senior Member
    Join Date
    Sep 2007
    Posts
    711
    Thanked: 22

    Default

    I've had the same thing, blade not passing HHT or slicing through arm hairs without pressure, but still shaving great. This has happened with most, all my straights including a feather.

    This is not at all uncommon IIRC.

  14. #10
    Newbie Str8 Shaver cwrighta70's Avatar
    Join Date
    Feb 2008
    Location
    Marion, IN
    Posts
    576
    Thanked: 29

    Default

    On the other hand, I just had a razor pass the HHT but it did not provide a great shave. It took the hairs off, but left razor burn behind. I don't have this problem with my truly shave ready razors.

    Next I'll be ordering some chromium paste to work with.

    Back on topic, if your razor is shaving well, that's really all that matters. Good luck!

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •