Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Junior Member
    Join Date
    Apr 2008
    Posts
    1
    Thanked: 0

    Default Worst shave I ever had

    I am in desparate need of help. I, obviously, am new to the straight razor set, having just purchased a Dovo Micarta after an extensive inquiry. It was made shave ready by Lynn. I have the right soap, brush and strop. I lather several times a shave. I have shaved three times and each time gets worse than the last. I have extreme irritation on the face and most importantly, I am getting a horrible shave. I cut my chin so much I finally resorted to a regular safety razor to finish up. I have read the books, looked at the videos and aside from having too much information, I do not know what I am doing wrong. If this is the best I can hope for, I have a razor for sale. Any suggestions would be appreciated.

    Bill Smith

  2. #2
    Member
    Join Date
    Apr 2008
    Posts
    49
    Thanked: 2

    Default

    Well seems that you are frustrated and that makes experimenting and learning pretty tough so relax... If you could describe your shaving routine ie pressure used, your stropping technique, and pre shave that might help us better guide you. Just a quick note: In the 3 straight shaves i have had I have noticed that my strop was kinda concave on the edges and i was starting to see that the center of the blade was not touching as much as the edges which on the surface would seem that my blade sucks, but may mean that i'm actually not stropping that part of the blade causing a crappy shave.

  3. The Following User Says Thank You to GoDSpeeD For This Useful Post:

    BeeEss (05-26-2008)

  4. #3
    what Dad calls me nun2sharp's Avatar
    Join Date
    Feb 2008
    Location
    Kansas city area USA
    Posts
    9,172
    Thanked: 1677

    Default

    MY first guess would be technique, without seeing what you are doing its hard for me to say. At the moment all I can advise is practice. Make sure you are stropping correctly, make sure the beard is prepped correctly,steaming towels ,wash cloth or fresh from the shower. The next big thing I would consider is blade angle.

  5. The Following User Says Thank You to nun2sharp For This Useful Post:

    BeeEss (05-26-2008)

  6. #4
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    26,948
    Thanked: 13221
    Blog Entries
    1

    Default

    5 things really have to come together for a great straight shave

    1. Sharp razor...Sounds like you have taken care of that
    2. A well stropped razor... This is one of the worst problems for new shavers
    3. Good bread prep ...Sounds like yer doing OK in that department
    4. Correct razor angle and very light pressure.. Another huge problem area for new shavers
    5. EXPERIENCE!!! Yeah that just comes along with the other 4

    I would wager angle / pressure and stropping
    but slow down and take it easy working from the flats of the cheeks out as you expand yer comfort zones....
    Good luck and welcome aboard
    Last edited by gssixgun; 05-01-2008 at 11:38 PM.

  7. The Following User Says Thank You to gssixgun For This Useful Post:

    BeeEss (05-26-2008)

  8. #5
    Member
    Join Date
    Mar 2008
    Posts
    37
    Thanked: 1

    Default

    I've been doing this for a few months, in my experience with irritation and bad shaves, the culprit was always stropping and/or lathering. Lathering is the hardest one for me to get right...

    So tell us how you do those. Particularly, tell us about the behavior of your lather. If you lather several times a shave, it sounds to me like your lather is sudsy instead of lathery. It's disappearing too quickly. That means that you've a) got the wrong soap/water ratio or b) you aren't working your brush long enough or most likely c) both.

  9. #6
    Senior Member
    Join Date
    Apr 2008
    Location
    Boston, MA
    Posts
    1,486
    Thanked: 953

    Default

    The first few shaves with a str8 are supposed to suck, so don't get discouraged.

    All of the above - I'm also worried you might have rolled the edge that you had at the start - if you have a pasted paddle try to really sharpen it up.

    But also, don't try to learn all at once. Straight shave for two or three days and then do DE the rest of the week, and then go back for two or three days of straight shaves. That way you won't get frustrated, will give your face some time to heal, and will allow you to let go any bad habits you are picking up and start fresh the next round of straight shaving.

  10. The Following User Says Thank You to loueedacat For This Useful Post:

    BeeEss (05-26-2008)

  11. #7
    Member
    Join Date
    Mar 2008
    Posts
    37
    Thanked: 1

    Default

    Yeah, I learned step by step as well, you could do that. I got a shavette, and used that and a can. Then I figured out brush & soap (still working on that...). Then I got a straight, and learned stropping. Now, I found out the damn things don't come shave-ready, and it's too dull for shaving anymore. I'm sending it off for honing tomorrow or Saturday.

  12. The Following User Says Thank You to Infectious For This Useful Post:

    BeeEss (05-26-2008)

  13. #8
    Senior Member
    Join Date
    Mar 2008
    Posts
    275
    Thanked: 53

    Default

    One big thing for me was starting out just shaving the easy parts on the sides of my face. Once I was getting good results and my confidence went up, I started shaving the rest. Hang in there!

  14. The Following User Says Thank You to clrobert60 For This Useful Post:

    BeeEss (05-26-2008)

  15. #9
    Natty Boh dave5225's Avatar
    Join Date
    Mar 2007
    Posts
    1,462
    Thanked: 183

    Default

    Quote Originally Posted by gssixgun View Post

    I would wager angle / pressure and stropping
    but slow down and take it slow working from the flats of the cheeks out as you expand yer comfort zones....
    Good luck and welcome aboard
    I'll go along with that ! Start with your blade almost flat on your face . Don't press the blade into your face , let the blade "ride" on your skin . You may want to try shaving some arm or leg hair , to help you get the feel for shaving with a straight . And you might like to read Old_School's shaving journal , in the shaving section of the forum , some of it was wiped out when the server crashed , but there is still plenty of good stuff to read .
    Greetings , from Dundalk , Maryland . The place where normal people , fear to go .

  16. The Following User Says Thank You to dave5225 For This Useful Post:

    BeeEss (05-26-2008)

  17. #10
    . Bill S's Avatar
    Join Date
    Sep 2006
    Location
    Richfield, Ohio
    Posts
    2,521
    Thanked: 597

    Default

    It sounds like you need to step back a little bit. I would recommend that you limit yourself to shaving the sides of your face with your Dovo (sideburn to jaw line) until you have the feel for a straight doing its work. Try different angles ranging from almost flat to slightly over 30 degrees and you will see the difference that the angle of attack makes to the perceived sharpness of the razor and the quality of the shave. I would leave the goatee area alone for a while (shave it with whatever you normally use) as that part of the face is tough to get right at first. Good luck, and let us know how you are doing.

  18. The Following User Says Thank You to Bill S For This Useful Post:

    BeeEss (05-26-2008)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •