Page 1 of 2 12 LastLast
Results 1 to 10 of 19
  1. #1
    Junior Member
    Join Date
    Apr 2008
    Posts
    5
    Thanked: 1

    Default Tips for first Japanese Straight Razor (newbie needs a lot of help)

    Hey Guys,

    I've been a long time reader, started wetshaving a couple of months ago with a DE and felt like it was time to move onto a straight razor. Felt like a Japanese straight razor was a good mix of form, function, and design.

    While I didn't exactly expect to win it I put in a bid for a Kiyotaka Ichihara Straight Razor and won. (If any of you want to give me feedback on this razor please do!)

    But at this point, I don't know what to do once I get it. I've read the B&B Interactive Guide to Straight Razor Shaving and I'm not quite sure how the tools or techniques apply to a Japanese straight razor.

    I've read on many threads some controversy on whether to hone and/or strop with a ratio from one side to the other. Whether to strop at all. How to hone. What I need to hone.

    So if anyone can give me some pointers on what I'm going to need to start using this razor once I get it. I have everything I need from the shaving cream/brush/lather make accessories. I really just need to know what I need to get it honed/stropped and prepared to shave. Any tips on techniques would be appreciated too!

    Thanks

  2. #2
    Heat it and beat it Bruno's Avatar
    Join Date
    Nov 2006
    Location
    Belgium
    Posts
    15,130
    Thanked: 5229
    Blog Entries
    10

    Default

    Do a forum search for 'Tosuke' and / or 'Iwasaki'.

    There are several threads dealing with the shaving and honing aspects of Japanese straight razors.
    Til shade is gone, til water is gone, Into the shadow with teeth bared, screaming defiance with the last breath.
    To spit in Sightblinder’s eye on the Last Day

  3. #3
    Student of Life skiblur's Avatar
    Join Date
    Feb 2008
    Location
    Indianapolis, IN
    Posts
    168
    Thanked: 10

    Default The Down Low

    *Please forgive me if any parts are too rudimentary - some of this I copied from a PM I sent previously, and I believe thorough information will be useful for future searches.*


    DISCLAIMER
    I have been shaving with my Tosuke exclusively for 6 weeks now after having learned on a Wapi for 4 weeks. I am actually more familiar with the Japanese style simply because I've spent more time with it. Though I'm sure there are others out there that use one regularly as well, many have mentioned that it serves mostly as a collector's item. It is different in technique and maintenance, but the amount of effort you put into learning and using a Japanese razor is no different than that which you would put into a western style. I am no expert, but I have become familiar with this razor after having experimented on my own. Here is a summary of what I have learned so far, including most of the information that can be compiled by searching through previous threads.



    HONING
    • need 12k or similar polishing stone
    Honing is unique in that it is a 3:2 ratio. First keep the concave side down and move forward-backward-forward. Then flip the blade so the flatter side is down and move forward-back. Repeat until sharp.


    Recommended stones are typically Japanese and around 12k grit. I cannot see any need for a Japenese stone rather than a stone of different origin other than your own appreciation for historical authenticity, yada yada. I personally use a Spyderco UF and then a Shapton 16k to finish it off, and after stropping I pass the HHT on my super fine blonde hair WITH the grain, so you can imagine how sharp these can get. Really I believe any finishing stone (12k or higher) will work great. The steel on these blades is harder than normal, so you will need to use some pressure initially and lighten as you progress. And actually I would hesitate to recommend the Chinese 12k since it's naturally slow cutting time will only be worse with this harder steel.


    STROPPING
    • stropping is a must
    First let me say that stropping is absolutely necessary. The difference is just like stropping any other razor – you will achieve a much smoother/sharper edge after stropping. In my experience (real experience, tested today, yesterday, etc. both before and after stropping), it is the difference between HHT and no HHT and much more comfy shaves.


    Stropping is done in the 3:2 ratio as well. While some people argue that this ratio is not necessary, some of us have found that it does in fact work better, so why argue with results? I have found it easiest to do a forwardpass-backwardpass-forwardpass-backwardpass-forwardpass (FBFBF) motion and repeat for a total of about 30 of these passes where 1 FBFBF = 1 pass. This correlates to 60 strokes on the side of the razor that receives the least strokes (the flatter side), which as mentioned in a study documented by thebigspendur, is an ideal number. Just like with honing, you will apply a bit more pressure than with a European razor. Unlike honing, you will ALWAYS lead with the spine.


    TECHNIQUE
    Since the blade is not symmetrical and neither is the edge given that we have honed and stropped in a 3:2 ratio, the standard 30 degree rule against the face can be thrown out the window. The only real way to determine a proper shaving angle is by trial and error.

    Make sure the concave side (the side with the engravings) is on your face, and the blank side is away from your face. This side of the blade is the one meant to be used for shaving. As you are learning to use a new tool, it is best that you stick with this side until you are comfortable and have found a good shaving angle and technique. Using the other side of the blade works perfectly fine, but be aware you will need to discover the angle for this side as well as it will be different. It is up to you whether you want to use both sides or not.

    Also, it's worth mentioning that the blade on the Tosuke, since it's not as lengthy as a normal straight, is fairly light in comparison. So although you will want a light touch, this is referring to how hard you press the razor against your face. What you don't want is a very light stroke, because it will feel like the razor wants to bite the hairs more than slice through them. Don't go superfast, mind you lol, but probably about the speed you would use a Mach3.


    Begin Rudimentaryness
    To begin, start with a stroke or two with it flat against your face, just to get the feel of it - it almost certainly won't cut anything at this angle of zero degrees, but it makes a good starting point.

    When you're ready, increase the angle to just a wee bit so the spine is barely off your face for the next couple passes. Remember to keep a light touch, we are trying to isolate only the angle variable. Keep the same angle throughout any one pass.

    With each pass (or whenever you're ready), change the angle to be slightly more until you notice that the hairs are now being sliced off.

    This method of incremental trial and error will allow you to find the most comfortable (and least irritable!) shaving angle, because you will have noticed that the lower the angle, the smoother it feels against your face. If you feel like the razor is irritating your skin, try lowering the blade angle and see if it still shaves - it's really easy to accidentally creep that angle up.
    Last edited by skiblur; 04-23-2008 at 07:05 AM.

  4. The Following 6 Users Say Thank You to skiblur For This Useful Post:

    dcarmell (05-01-2008), fonthunter (04-07-2009), headdoc (04-30-2008), keenedge (10-07-2009), RetroGrouch (07-30-2009), vegard_dino (05-13-2008)

  5. #4
    Student of Life skiblur's Avatar
    Join Date
    Feb 2008
    Location
    Indianapolis, IN
    Posts
    168
    Thanked: 10

    Default

    Oh yeah, and welcome by the way!

  6. #5
    Senior Member
    Join Date
    Sep 2007
    Posts
    711
    Thanked: 22

    Default

    Actually dude you got one hell of a good deal, even if you had have paid the full price.

    I believe that seller is a member here who claims to have extensive knowledge on Japanese straights. Shame he can't read Kanji, because that is actually stamped with Inoue Tosuke's name Perhaps he just use one picture for all his sales, and the razor you get will be different. Makes no difference though, as I said its a bargain price, highway robbery actually, there is no difference between names on these razors either because as some don't actually know is Mr Inoue would actually make razors for people (mainly knife shop owners) and stamp their name on the blade for a small fee.

    On another note, its perhaps not the best choice when learning to shave with a straight but YMMV. Hope it serves you and your children and your children's, children well.

  7. #6
    Junior Member
    Join Date
    Apr 2008
    Posts
    5
    Thanked: 1

    Default

    Thanks for all the help guys! I do have a couple of questions for skiblur.

    First off when you talk about the concave side (which you say is the side with the engravings) vs the other side, which according to the honing section, you say is the flat side. So just to be clear, the side with the writing is concave (probably easier to notice with the razor in hand) and the side that has the two tone pieces forged together is the more flat side which is the "2" side of the "3:2" ratio.

    Secondly, I guess I'm a little bit confused by the forward backward on the honing. So basically you mean with the concave side, move the blade forward, the instead of flipping it "over" to the flat side, rotate the blade 180 degrees so the concave side is still down and move back towards you, and then do it again to get the 3 part of the 3:2. Then flip the blade over to the flat side and do a forward and backward pass only?

    And then when stropping, moving the blade forward with the concave side down, flipping it over to the flat side and moving it backwards, flip to the concave and forward, flip to the flat side backwards, and one more with the concave to complete 1 set. Then do it again 60 times right?

    (I'm just clarifying to make sure I do end up trying to hone or strop in the wrong manner).

    Now just a couple other questions. With traditional straights, it seemed like most people recommended using a 4000 then an 8000 to get the hone part down. Based on your post, a 12k is enough for the hone. Now is this because Japanese blades are originally sharpened a little and just need to be finished? I'm probably going to buy a stone tonight for honing just making sure I have my bases covered. Or should I go with the method you said you do, finishing off with a 16k? Also after getting the stones, should I be flattening them with a diamond hone as well? If so what should I be using.

    And then last but not least, what do you recommend for a strop. It looks like from your instructions that I should be doing 60 passes with FBFBF to achieve the 3:2. But are we talking 30 on a canvas side 30 on a leather? or just all on a leather side?

    Sorry for all the additional questions, your original post definitely gave me a lot of insight and was extremely helpful. Thanks for all the input guys!

  8. The Following User Says Thank You to djfluffkins For This Useful Post:

    fonthunter (04-07-2009)

  9. #7
    Student of Life skiblur's Avatar
    Join Date
    Feb 2008
    Location
    Indianapolis, IN
    Posts
    168
    Thanked: 10

    Default

    First off when you talk about the concave side (which you say is the side with the engravings) vs the other side, which according to the honing section, you say is the flat side. So just to be clear, the side with the writing is concave (probably easier to notice with the razor in hand) and the side that has the two tone pieces forged together is the more flat side which is the "2" side of the "3:2" ratio.

    Correct, sir.

    Secondly, I guess I'm a little bit confused by the forward backward on the honing. So basically you mean with the concave side, move the blade forward, the instead of flipping it "over" to the flat side, rotate the blade 180 degrees so the concave side is still down and move back towards you, and then do it again to get the 3 part of the 3:2. Then flip the blade over to the flat side and do a forward and backward pass only?

    Correct, except for the 180 degree rotation part. When moving "forward," the blade is meant to lead, and when moving "backward," the spine will lead. This is considered unconvential compared to traditional western honing.

    And then when stropping, moving the blade forward with the concave side down, flipping it over to the flat side and moving it backwards, flip to the concave and forward, flip to the flat side backwards, and one more with the concave to complete 1 set. Then do it again 60 times right?

    If we call that 1 set, then repeat it 30 times. Explanation: 30 sets means that the one side of the blade will get 90 strokes and the other will get 60 strokes, which is optimum.

    (I'm just clarifying to make sure I do end up trying to hone or strop in the wrong manner).

    Whatever you do, always lead with the spine on your strop. Leading with the edge will slice through it. (Best advice I can give, hah).


    Now just a couple other questions. With traditional straights, it seemed like most people recommended using a 4000 then an 8000 to get the hone part down. Based on your post, a 12k is enough for the hone. Now is this because Japanese blades are originally sharpened a little and just need to be finished? I'm probably going to buy a stone tonight for honing just making sure I have my bases covered. Or should I go with the method you said you do, finishing off with a 16k? Also after getting the stones, should I be flattening them with a diamond hone as well? If so what should I be using.

    You will need to flatten any hone, otherwise the hones work against each other if they're not all flat. The most-recommended flattening stones are the DMT D8C and the Shapton GDLP.

    I have used the Norton 4k/8k to straighten out my edge a little, as it came with a slight frown. I cannot offer any insight as to why, but I have only ever read on SRP that the suggested hone is a 12k, so hopefully someone else can contribute to this recommendation. I would say all you need is the 12k or equivalent, unless your blade has some nicks in it.


    And then last but not least, what do you recommend for a strop. It looks like from your instructions that I should be doing 60 passes with FBFBF to achieve the 3:2. But are we talking 30 on a canvas side 30 on a leather? or just all on a leather side?

    Please see above for clarification on the number of sets. The numbers I provided are for leather only. I would start from there and experiment with different combinations of canvas and leather since everyone's technique will result in different results.

    For the strop itself, Tony Miller makes the best strops available, and at competetive prices too.


    Sorry for all the additional questions, your original post definitely gave me a lot of insight and was extremely helpful. Thanks for all the input guys!

    No prob Have fun, hope this helps!

  10. The Following User Says Thank You to skiblur For This Useful Post:

    fonthunter (04-07-2009)

  11. #8
    The Hurdy Gurdy Man thebigspendur's Avatar
    Join Date
    May 2005
    Location
    New Mexico
    Posts
    32,737
    Thanked: 5016
    Blog Entries
    4

    Default

    When you get the blade you will see that one side is convex and the other is concave and that will be clear to you.

    Any info you may have read relating to honing western razors you need to forget about when you hone a japanese razor. The only thing I would add to the great advice you already got is when you hone on the 12K you need to be exerting considerable downward pressure on the hone and this is the secret or art of honing one of these razors. Too little pressure and you can hone for a month of Sundays and nothing will happen and to much pressure and you know what will happen. The other alternative is to use a diamond pasted strop. They tend to work very well with japanese razors especially at .5 grit. When you get the razor you'll have to inspect it and see what the condition is. If the edge has chips which has to be honed out your in for an adventure.

    I agree learning to use a straight with one of these can be a little challenging. Its like learning to drive with a manual transmission. Just a little more challenging.

    Keep us informed of your progress.
    No matter how many men you kill you can't kill your successor-Emperor Nero

  12. #9
    Junior Member
    Join Date
    Apr 2008
    Posts
    5
    Thanked: 1

    Default

    So I'm sure this has been answered somewhere... The DMT D8C is the coarse grade 45 micron version. What's the benefit of using this over the Fine or Extra Fine? is it cost? or ease of use?

  13. #10
    Heat it and beat it Bruno's Avatar
    Join Date
    Nov 2006
    Location
    Belgium
    Posts
    15,130
    Thanked: 5229
    Blog Entries
    10

    Default

    a) its coarseness makes it a fast cutter
    b) a finer plate without holes will stick to the stone like it is glued on, due to the vacuum between the stones.
    Til shade is gone, til water is gone, Into the shadow with teeth bared, screaming defiance with the last breath.
    To spit in Sightblinder’s eye on the Last Day

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •