Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Junior Member
    Join Date
    Apr 2008
    Posts
    1
    Thanked: 0

    Default Do I Even Need a Straight?

    Hi everyone. I'm totally new. So new, in fact, that I don't even own a straight razor. However, I love the idea of using one. There are a dozen reasons why I'd rather have one over a disposable, but I won't get into that here.

    The reason I'm on this forum is that I don't even know if I should be getting one. I don't have much facial hair (only the goatee/fumanchu). However, my goatee is relatively dense, so, is it still worth it? I tend to think it is, but maybe some other people who don't have much facial hair can speak from experience? I just wanted recommendations--should I still get a straight razor?

    Another topic is this: I HATE poor quality tools. If I were to purchase a straight razor, I am looking to get one that will last. I don't care if I never use it again. I'd rather buy a quality blade and never use it, than purchase one that can't cut paper and then get turned off from shaving because of a poor product. So, my question is this--how much should I be looking to spend to get a quality razor, professionally sharpened, along with a nice, quality strop?

    Thank you so much for contributing to this forum! Where would we be without the internet? :-)

    Tom

  2. #2
    Never a dull moment hoglahoo's Avatar
    Join Date
    Feb 2008
    Location
    Tulsa, OK
    Posts
    8,922
    Thanked: 1501
    Blog Entries
    1

    Default

    Quote Originally Posted by korean_fabio View Post
    Where would we be without the internet? :-)

    Tom
    Haha, we'd be paying a lot less for hard-to-find razors
    Find me on SRP's official chat in ##srp on Freenode. Link is at top of SRP's homepage

  3. #3
    Senior Member blabbermouth
    Join Date
    Apr 2007
    Location
    St. Paul, MN, USA
    Posts
    2,401
    Thanked: 335

    Default

    _fabio,

    Cost? $205.94 + shippping.

  4. The Following User Says Thank You to Bruce For This Useful Post:

    korean_fabio (04-21-2008)

  5. #4
    Senior Member blabbermouth jnich67's Avatar
    Join Date
    Jun 2006
    Location
    Westchester NY
    Posts
    2,485
    Thanked: 184

    Default

    Hi Tom, welcome.

    Either you want to try it or you don't. You'll answer that question for yourself eventually. If all you care about is a good shave for less money, consider a DE. If the less tangible qualities of the straight appeal to you, go for it.

    There are many good quality razors around. You don't have to spend a fortune to get one. You can browse the Buy/Sell/Trade forum here to get a sense of the vintage blades available. You can also buy a new Dovo or TI from one of the vendors well spoken of here. If you buy one, I suggest you get it professionally honed. Eventually, you'll need to learn to hone or be prepared to send your razor(s) out for honing from time to time. If you look at some of the Sticky posts, you'll get a lot of good info.

    Jordan

  6. The Following User Says Thank You to jnich67 For This Useful Post:

    korean_fabio (04-21-2008)

  7. #5
    Newbie Str8 Shaver cwrighta70's Avatar
    Join Date
    Feb 2008
    Location
    Marion, IN
    Posts
    576
    Thanked: 29

    Default

    A lot of it (shaving w/ straight) comes down to personal preference. Many people find that it's easier on their skin to use a straight w/ thick lathers. Or they simply like the feeling of doing something the old way. Even those with little facial hair probably get a closer shave w/ a straight than they would with a disposable. There are tons of reasons why straights are better than anything in the world. (well not EVERYTHING I guess)

    As far as what you should expect to pay, it's all over the board man! I got a great quality Geneva 5/8 Spike, shave-ready, for $30. Many people like to purchase the high end Dovos which cost anywhere $100+. The point is to find something that YOU LIKE, and that fits you. Watch the B/S/T. There's good deals there all the time.

    EDIT: LOL, slow typing again! This time Jordan beat me... GRR

  8. The Following User Says Thank You to cwrighta70 For This Useful Post:

    korean_fabio (04-21-2008)

  9. #6
    Senior Member
    Join Date
    Apr 2008
    Location
    Wales UK
    Posts
    1,087
    Thanked: 84

    Default

    Hi, I'm very new to shaving with an open/straight/cut throat razor too.
    There are actually a couple of pleasures to be had from this type of shaving. The first being the "wet shave", nice old fashioned high quality soaps, hot towels or face cloths. pre-shave oils. a little face massage maybe!, then lather up some soap with a brush made from a badgers chest hair, applied to your face to make your hair stand on end. Then there is the hardware!! You could choose a "cheap" vintage blade hand made by a guy long dead, neglected by a couple of generations of throwaway people, polished and brought back to life/service by yourself and a guy who knows how to hone a lump of pig-iron into one of the sharpest blades you'll ever see or feel. Or buy a new one either a very well made blade, a custom work of art or one of Maestro Livi's excellent regrounds.
    Then try to throw it all together and have a clean, fresh set of chops a baby would envy, without cutting yourself too badly.
    I've enjoyed it, and I haven't tried a custom yet!
    Try it, it is an experience worth at least trying.
    best wishes Marcus

  10. The Following User Says Thank You to littlesilverbladefromwale For This Useful Post:

    korean_fabio (04-21-2008)

  11. #7
    Senior Member
    Join Date
    Apr 2008
    Location
    Wales UK
    Posts
    1,087
    Thanked: 84

    Default

    My pleasure.

  12. #8
    Member AFDavis11's Avatar
    Join Date
    May 2005
    Location
    Virginia
    Posts
    5,726
    Thanked: 1486

    Default

    Quote Originally Posted by Bruce View Post
    _fabio,

    Cost? $205.94 + shippping.
    You want him to shave with a romance cover model?

  13. #9
    Hones & Honing randydance062449's Avatar
    Join Date
    May 2005
    Location
    Saint Paul, Minnesota, United States
    Posts
    7,971
    Thanked: 2202
    Blog Entries
    1

    Default

    Welcome to the SRP!

    Lots of good advice here so far. Just one main thing to remember is to have your razor both honed and shave tested.
    The only real test is the shave test.

    Keep us posted on how it goes for you.
    Randolph Tuttle, a SRP Mentor for residents of Minnesota & western Wisconsin

  14. #10
    Junior Member
    Join Date
    Apr 2008
    Posts
    28
    Thanked: 0

    Default

    Hey There Tom,

    I hope all is well with you. I to am a newbie, expecting to do my first shave this Sunday, still awaiting some supplies in the mail…

    To answer your questions (in my own way) I think the best answer I can give you is my own setup/experience with straight razor shaving so far.

    First, you need a … straight razor. I got mine from classicshaving.com, you can check it out here. A nice razor, no decorative handle or anything, but a good strong blade. Next, you need to have it sharpened. It just so happens that Classicshaving.com makes that easy to do. They employ a sharpening service run none other than by Lynn Abrams, the guy who started straightrazorplace.com. Should you get the razor referred to above or any razor from classichsaving.com be sure to purchase the service and mention in the comment box to send the razor to Lynn. Or purchase your razor from wherever, purchase Lynn’s service at classhaving.com and send him the razor.

    Now that you have the razor and the sharpening covered, maybe a strop, as you so pointed out. I like the hanging strops like this one and that one and don’t forget a little conditioner for the strop, use very sparingly. I also strongly suggest watching the video that Lynn Abrams made, you can also buy that at classicshaving.com right here. Of course, besides the sharp straight razor and strop, brushes, shaving cream and aftershave are also necessary. I won’t get into my favorites at this time (as I have only tried one type of each). I am presently engaged in shaving with a MACH 3, but using all the other pleasures of straight shaving (badger brush, shaving cream/soap, (no more blue Gillette foam for me as about a month ago) and aftershave.) If you wish for more specific information on which type of badger brush/shaving cream/aftershave to use…you should start a new thread or check out a few others by doing a search of the appropriate forum.

    I also recommend a pre-shave oil. I find this one to be very nice. Oil helps to soften up the beard. Do not be scared of the price, only one pump from the bottle is necessary for your shave, only one. Thus, a 60ml bottle should last 9-12 months or so if you shave every day. Also, be sure after applying the oil, as Lynn states in his video, to dry your hands, the oil will make your fingers very slippery.

    Hope this gets you started at least....

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •