Page 1 of 2 12 LastLast
Results 1 to 10 of 16
Like Tree49Likes

Thread: Do I need a hone?

  1. #1
    Junior Member
    Join Date
    Oct 2018
    Location
    Miami, FL
    Posts
    2
    Thanked: 1

    Default Do I need a hone?

    Hello, I'm new to the forum. Really want to get into straight razor shaving so bought a cheaper vintage Dubl Duck Special #1 on eBay that was "shave ready" to try it out. Bought it from one of the two sellers that seem to sell the most so assumed it had a good edge. Bought a beautiful strop and used it first but when I went to put the razor to my face the first time I was surprised at how it really wasn't cutting, mostly skimming over the hair and just cutting a few. I realize I am new and I tried different angles and pressure but I figure this can't be how it is supposed to be. I tried the hanging hair test many times and only in one small spot a couple of times it seemed to grab, skimming the top of the arm hair produced nothing and even shaving the arm hair didn't even pick up all the hair i passed over. I've got some DE blades and did all those tests on them just to see the difference and that blade obviously passed all tests immediately. I've heard you can dull a blade with poor stropping but even though it was my first time I was very careful and watched videos of how to do it - can't imagine i did much if any damage from stropping. Should I have a reputable honemeister take a look at this blade? I was so intent on having everything in the best shape it could be for my "test" to see if i really like straight razor shaving but I've seen blades in my life sharper than this. It would be great if there were a honemeister locally (I'm in Miami) or if not I could send it away. This kind of check/maintenance hone I can't imagine would cost that much. All thoughts/recommendation welcome. Thanks!

  2. The Following User Says Thank You to bmiami For This Useful Post:

    sharptonn (10-09-2018)

  3. #2
    Senior Member blabbermouth OCDshaver's Avatar
    Join Date
    Jul 2012
    Location
    Chicagoland - SW suburbs
    Posts
    3,772
    Thanked: 734

    Default

    A couple things. First, yes get it honed. What one person on eBay claims as shave ready may not really be shave ready. In order to learn to use it you need to be guaranteed that the edge is good. Second, getting used to using a straight can take a while. There is a different, or lack of, leverage that the handled razors you’ve used in the past had. It takes some getting used to. A lot of us would suggest not trying to complete a full shave from the start. Try getting used to it by shaving one side of your face and leave off there until next time. Little by little you do more and more. There’s a learning curve.

  4. #3
    Razor Vulture sharptonn's Avatar
    Join Date
    Oct 2010
    Location
    Lone Star State
    Posts
    25,827
    Thanked: 8588

    Default

    Hi, Miami. Welcome.
    Slow down and do some reading here. Some beginner's tips on hones and recommendations are all here.
    Find your way around. It's easy.
    Search box at top-right for your perusal. Read all you can, learn all you want to.
    If all else fails, Lots of us are here to help!

  5. #4
    Skeptical Member Gasman's Avatar
    Join Date
    Nov 2016
    Location
    Colorado Springs
    Posts
    10,473
    Thanked: 2182

    Default

    Welcome to SRP!
    You have come to the right place. I know we have a few members in FL but I don't know who close they are to you. Look up the Members list, find someone close to you that has posted recently and send him a PM. OR, Just wait around and someone will come back to you from FL. We have a lot of good people that will be more than happy to give ya pointers and help with honing for a very low cost. Some will do it for free just to keep you learning properly for the first time.
    As OCD said, It takes time to learn and do a little at a time, or jump right in and do your entire face. But I warn you, It might be uncomfortable. The saying is... at 100 shaves with a straight you are now starting to understand. At 200 shaves you will know that at 100 you didn't really know much. But don't get discouraged. It's a fun way to shave and with time you will get the best shaves you have ever gotten.

    Stropping can wipe out an edge with one stroke if not done properly. That's why its recommended using a butter knife on a strop at first to learn and get the muscle memory going. Go slow and take your time in all these things. I know someone will get back to you soon.
    Grazor and MichaelPz like this.
    It's just Sharpening, right?
    Jerry...

  6. #5
    Senior Member blabbermouth RezDog's Avatar
    Join Date
    Feb 2013
    Location
    Haida Gwaii, British Columbia, Canada
    Posts
    14,383
    Thanked: 4820

    Default

    Hi, welcome to the forum.
    It seems to me that there are several members from Miami here, and perhaps one will volunteer and come to your aid.
    It could be many things or combinations. Clever you compared your straight against a DE blade. It sounds mostly like you need to get it honed.
    Your varying angles may have missed the right one. If that razor is in good shape it will be a great shaver, with a proper edge of course.
    USPS is pretty quick at getting a razor to and from being honed.
    rolodave, Gasman and MichaelPz like this.
    It's not what you know, it's who you take fishing!

  7. #6
    Senior Member MisterClean's Avatar
    Join Date
    Jan 2016
    Location
    Prescott Arizona USA
    Posts
    825
    Thanked: 369

    Default

    Have a member here hone that razor for you. You will know what a razor is suppose to feel and shave like. Care for your razor is a must if you want it to survive. There is a ton of info in our library on stropping, storage, oils and rust prevention. Welcome to the Forum.
    Freddie

  8. #7
    Senior Member blabbermouth tcrideshd's Avatar
    Join Date
    Oct 2013
    Location
    Oakland Tn
    Posts
    6,586
    Thanked: 1894

    Default

    Simple answer , no you don't need a hone. Do you need a properly honed one, yes. Then you need sometimes months before you can use one right, and stropping is the most important thing to maintenance, so you need a strop and know how to use, a properly honed razor, and experience. Plus an ability to listen to good advice. Tc
    “ I,m getting the impression that everyone thinks I have TIME to fix their bikes”

  9. #8
    Senior Member blabbermouth outback's Avatar
    Join Date
    Mar 2015
    Location
    Akron, Ohio
    Posts
    11,924
    Thanked: 4300

    Default

    PM sent...

  10. The Following 2 Users Say Thank You to outback For This Useful Post:

    MisterClean (10-09-2018), RezDog (10-09-2018)

  11. #9
    MrZ
    MrZ is offline
    Senior Member
    Join Date
    Sep 2017
    Location
    Upstate New York
    Posts
    640
    Thanked: 104

    Default

    Outback will give you an edge that will scare the whiskers off of your face! He has done work for many of us, and is 100% trust worthy.

  12. The Following User Says Thank You to MrZ For This Useful Post:

    outback (10-09-2018)

  13. #10
    Junior Member
    Join Date
    Oct 2018
    Location
    Miami, FL
    Posts
    2
    Thanked: 1

    Default

    Thanks for all the great advice, this forum and the people on it are amazing. I will start shaving only one side of the face to not be overwhelmed as suggested. Gasman, that's a great tip on the butter knife but scary that you can wipe out an edge so easily. From the videos I've seen stropping seems relatively straightforward and I was listening for the audio feedback but maybe I heard the wrong feedback! When stropping should the blade lie completely flat on it's side? If so it doesn't seem like the edge is touching the leather and I don't hear any feedback, but when I angle it up just the slightest amount I can hear the blade making a "shush" sound across the stop so I figured that was the right way to do it.
    MichaelPz likes this.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •