Results 1 to 10 of 10
Like Tree10Likes
  • 2 Post By Butzy
  • 1 Post By Grazor
  • 2 Post By BobH
  • 2 Post By RezDog
  • 1 Post By athiker
  • 2 Post By s0litarys0ldier

Thread: Razor sticking/tugging and neck burn

  1. #1
    Junior Member
    Join Date
    Oct 2017
    Posts
    4
    Thanked: 0

    Default Razor sticking/tugging and neck burn

    Experienced shavers: please help!! I just got a Dovo Prima Silver Steel SR which had great reviews on amazon and other sites. I got everything I needed to hone and strop razor. I have a lot of experience with wet shaving but with a DE. I have two issues for which I’m hoping some people will have some advice.

    First issue is that it seems as if the razor is sticking to my face. The razor also does not feel that smooth on my face. I almost feel like if I make a stroke it’s going to cut my skin off. So this has been making it difficult to make confident strokes because I’m worried about cutting my skin. Sharpness should not be an issue because I honed the razor well and put it to the strop. I took it up to a 12,000 Shapton stone. I’ve been careful to not roll the edge on the strop. Does this sound like an angle issue?? Or do I suck at honing??

    My second issue is shaving my neck. I absolutely cannot get a burn free shave on my neck. I have a large Adam’s apple and have two concaves on either side of it so it’s very difficult. In fact, I had trouble with a DE for a long time. Any advice on this??

    Thanks for your help and happy shaving!

  2. #2
    Senior Member Butzy's Avatar
    Join Date
    May 2017
    Location
    Kansas City , MO
    Posts
    534
    Thanked: 113

    Default

    Quote Originally Posted by zaneprice5 View Post
    Experienced shavers: please help!! I just got a Dovo Prima Silver Steel SR which had great reviews on amazon and other sites. I got everything I needed to hone and strop razor. I have a lot of experience with wet shaving but with a DE. I have two issues for which I’m hoping some people will have some advice.

    First issue is that it seems as if the razor is sticking to my face. The razor also does not feel that smooth on my face. I almost feel like if I make a stroke it’s going to cut my skin off. So this has been making it difficult to make confident strokes because I’m worried about cutting my skin. Sharpness should not be an issue because I honed the razor well and put it to the strop. I took it up to a 12,000 Shapton stone. I’ve been careful to not roll the edge on the strop. Does this sound like an angle issue?? Or do I suck at honing??

    My second issue is shaving my neck. I absolutely cannot get a burn free shave on my neck. I have a large Adam’s apple and have two concaves on either side of it so it’s very difficult. In fact, I had trouble with a DE for a long time. Any advice on this??

    Thanks for your help and happy shaving!
    What tests have you done other than shave test after honing? It may be less sharp than you think. I would recommend sending it out to a professional honer to ensure it's sharp enough and cut down on the variables that could be off. If you're just starting out I will tell you that you're very likely not getting it as sharp as you need first try.
    Secondly, if you feel like you're going to cut skin off, it may be the angle. The rule of thumb I have heard is two spine widths off the face, which is a much more acute angle than what comes naturally to most beginners. Pay attention to the angle you're using because if you're doing it right, I don't think you should be worrying about cutting your face regardless of how sharp (or not sharp) your blade is.
    Lastly, the neck. this is one of the most difficult parts for me. And I have to say it just comes with patience and time. Before shaving, do a thorough evaluation of the orientation of your neck beard. Like really spend some time on it. And then use this to inform the angle at which you place your blade and the direction of your strokes. My beard is such that I have to use several different techniques to get a decent shave. up, down, left hand, right hand, short strokes, long strokes, you get the idea.
    That would be my advice, to start. but I'm sure you'll get some other very good advice from more experienced members here! Good luck!!!

  3. The Following User Says Thank You to Butzy For This Useful Post:

    zaneprice5 (10-09-2017)

  4. #3
    Truth is weirder than any fiction.. Grazor's Avatar
    Join Date
    Jun 2012
    Location
    Land of the long white cloud
    Posts
    2,946
    Thanked: 580

    Default

    Could be a combination of both honing and technique.
    Learning to hone is quite a task on its own. Learn to shave first. Best way to do this is send your razor out for a pro hone. This will give you a measure to go by. Takes a hundred or so shaves to get just shaving dialed in, add honing and you are compounding the learning curve.

    Sent from a moto x far far away
    BobH likes this.
    Into this house we're born, into this world we're thrown ~ Jim Morrison

  5. The Following User Says Thank You to Grazor For This Useful Post:

    zaneprice5 (10-09-2017)

  6. #4
    Senior Member blabbermouth
    Join Date
    Mar 2012
    Location
    Thunder Bay, Ontario, Canada
    Posts
    17,250
    Thanked: 3221

    Default

    If this was the first time you honed a razor that could be your problem right there, a poor edge that is dull and rough. The only way I have had a razor feel like it was sticking to my face was by having the blade flat on my face. As Butzy mentioned, a spine width or two gap between face and the spine is the way to go. As far as stropping goes, if you have not stropped a razor before how do you know you did a proper job of it. It could be one of those or a combination of all three.

    If you have not honed before get the razor honed by a person respected for their honing skills and when you get it back do not strop it. That would give you a know shave ready edge to start with and by not stropping would eliminate any question of your stropping buggering up the edge. As a bonus you would know what a shave ready edge feels like.

    Strop it before the second shave and if the razor feels worse than the first time you have a good indication your stropping needs worked on.

    Bob
    outback and Butzy like this.
    Life is a terminal illness in the end

  7. The Following User Says Thank You to BobH For This Useful Post:

    zaneprice5 (10-09-2017)

  8. #5
    Junior Member
    Join Date
    Oct 2017
    Posts
    4
    Thanked: 0

    Default

    Thank you very much. Very helpful!

  9. #6
    Senior Member blabbermouth RezDog's Avatar
    Join Date
    Feb 2013
    Location
    Haida Gwaii, British Columbia, Canada
    Posts
    14,383
    Thanked: 4820

    Default

    There are two things in question, can you hone and can you shave. As mentioned both of those are acquired skill sets. People do learn both at the same time. It can be done. I don't understand why anyone chooses to go that route. With a shave ready blade you get the luxury of simply focusing on learning to shave, once that is accomplished you can choose to learn how to hone and will be able to judge your edges quite well. Also if you are really interested in honing the very best way to learn is by attending a meet. If you follow or even post in the meets forum you will be able to find or inspire a meet in or near your area, unless of course you are as far from others as I am, in which case it makes for a nice part of a holiday.
    BobH and Butzy like this.
    It's not what you know, it's who you take fishing!

  10. The Following User Says Thank You to RezDog For This Useful Post:

    zaneprice5 (10-09-2017)

  11. #7
    Senior Member athiker's Avatar
    Join Date
    Aug 2015
    Location
    Ellijay, Georgia
    Posts
    135
    Thanked: 13

    Default

    Yep, what everybody else has said regarding technique. I have the same Adams Apple situation. The technique that works for me is : pull the skin tight to the side; and, learn to use the heel and toe of the blade for the valleys on either side. If that makes sense ?
    Ps: light on the pressure . . . . . .
    BobH likes this.

  12. The Following User Says Thank You to athiker For This Useful Post:

    zaneprice5 (10-09-2017)

  13. #8
    Senior Member Longhaultanker's Avatar
    Join Date
    Aug 2015
    Location
    Houston, TX
    Posts
    605
    Thanked: 217

    Default

    Another potential problem is lather. Is it moist enough? Suggestion: don't learn to hone on your Dovo. It is a top quality tool. Don't muck it up. Get an inexpensive razor such as a Gold Dollar to learn and practice honing. As someone who took up both straight razor shaving and honing at the same time, I know it is completely doable. Give it the time and commitment required. Do your homework. Watch the videos; hours worth. Get the right tools for the job. Once you are capable of honing a good edge on a lesser quality razor, you're ready to take your good razor to the stones.
    A little advice: Don't impede an 80,000 lbs. 18 wheeler tanker carrying hazardous chemicals.

  14. The Following User Says Thank You to Longhaultanker For This Useful Post:

    zaneprice5 (10-09-2017)

  15. #9
    Tradesman s0litarys0ldier's Avatar
    Join Date
    Aug 2014
    Location
    Sault Sainte Marie
    Posts
    1,719
    Thanked: 245

    Default

    I would keep working on your honing. It takes time to get good. Can't expect great results first time. Doesn't matter if you take that razor to 30k. Technique takes experience.

    Stretch skin to side as mentioned and use heel or toe to get those tricky hollows. The troubles of not having a fat flat neck. You are not alone my friend.

    Sent from my LG-K210 using Tapatalk
    athiker and Dieseld like this.

  16. The Following User Says Thank You to s0litarys0ldier For This Useful Post:

    zaneprice5 (10-09-2017)

  17. #10
    Senior Member blabbermouth Kees's Avatar
    Join Date
    Jun 2006
    Location
    The Netherlands
    Posts
    5,474
    Thanked: 656

    Default

    In spite of what manufacturers say a razor is seldom really shave-ready out of the box. Misleading but that is how it is.
    Learning how to hone takes time. Your razor is truely shave-ready when it cuts armhairs without requiring pressure. Get yourself a truely shave-ready razor off the B/S/T section. If you want to teach yourself get a cheap and cheerful vintage razor off the bay. If you want to start with a Gold Dollar make sure you get them from someone who tested it for you as their quality isn't very consistent.
    Which hones and strops do you have?
    For concaves you might want to consider a smiling blade.
    Last edited by Kees; 10-09-2017 at 03:09 AM.
    Plus ça change, plus c'est la même chose. Jean-Baptiste Alphonse Karr.

  18. The Following User Says Thank You to Kees For This Useful Post:

    zaneprice5 (10-09-2017)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •