Page 1 of 2 12 LastLast
Results 1 to 10 of 19
Like Tree11Likes

Thread: brushes, lather & water

  1. #1
    Senior Member
    Join Date
    May 2016
    Location
    Magog, Quebec
    Posts
    560
    Thanked: 81

    Default brushes, lather & water

    I'm looking for some advice on brushes, and after browsing around on this forum, I'm pretty sure I've come to the right place.

    I have a really nice silvertip brush, but have been finding that it doesn't transfer the lather to my face so well. Is it retaining too much water, or is it my technique? I've watched tons of tutorials and even though I can get a pretty decent lather in a bowl or on my hand, it just stays on the brush.

    In case it matters, here's some background information: My current brush has a 22mm knot, 49mm loft. It feels great, but is pretty floppy. I've discovered that the painting technique works way better than the swirl, but I feel like it's still inefficient.

    It took me a while to get a decent lather when I switched to wet shaving, and after a bit of research I realized that the water is probably a factor (it turns out I live an area with hard water at 7.5 grains), so I did some experimenting, and here are the results: With cream I can get a good lather if I use about 3x the suggested almond sized amount, but with distilled water I can get a better lather with only the suggested amount. With a soap it's pretty much impossible to get a decent lather, and I think that's partly because of the water and partly because of the brush, because even with distilled water it's tough. In all cases, the lather still doesn't get onto my face properly.

    So if it's technique, I welcome any advice. If I need a new brush, suggestions are welcome (I'm thinking maybe I need a stiffer boar or pure badger brush with a thick knot, around 25mm, and maybe a shorter loft), however budget is a definite limitation.

    Thanks!!
    Joel

    P.S. If anyone knows of places to get good shaving gear at a reasonable price in Montreal, please let me know. I'm finding all the local stores are way overpriced compared to online sellers, however I hate having to pay $10 shipping for a $20 item.

  2. #2
    Senior Member blabbermouth tcrideshd's Avatar
    Join Date
    Oct 2013
    Location
    Oakland Tn
    Posts
    6,586
    Thanked: 1894

    Default

    First I,m sorry it,ll be impossible without seeing the brush n hand. Second all soaps and creams can be done. Had water or not you just have to experiment and unlock it's secret. Three, the brush is probably to floppy and is holding on to the lather, and the painting strike works better.
    Onto user error, your maybe soaking your brush too much and then loading it up real rough getting it deep into the brush, try just wetting the tips and then just load it lightly on the tips only. Or try face layering adding a little water at a time till it's right. My friend it could be a lot of things unfortunantly. But my tastes would say get rid of the floppy brush and get something with a backbone. Tc
    “ I,m getting the impression that everyone thinks I have TIME to fix their bikes”

  3. #3
    Senior Member blabbermouth Haroldg48's Avatar
    Join Date
    Jun 2013
    Location
    Clayton, NC USA
    Posts
    3,341
    Thanked: 866

    Default

    Others are more expert than I am on brushes but I've found that painting is fine, and you can then follow up with swirls on your face to whip it up. A poll was done once here about who lathered what way, and it was interesting to read what different folks do. Some paint, some swirl, some face lather, some palm lather, some bowl lather, some scuttle hot, some cold lather....I've shaved with bar soap using my fingers....so I'd say work on it, experimenting some. A different brush might help, but I have 8 or 9 very different ones, and they all get used and work, depending on the soap and your patience.
    Last edited by Haroldg48; 06-09-2016 at 02:13 AM.
    joelkerr likes this.
    Just call me Harold
    ---------------------------
    A bad day at the beach is better than a good day at work!

  4. The Following User Says Thank You to Haroldg48 For This Useful Post:

    Lemy (07-02-2016)

  5. #4
    Senior Member blabbermouth RezDog's Avatar
    Join Date
    Feb 2013
    Location
    Haida Gwaii, British Columbia, Canada
    Posts
    14,383
    Thanked: 4820

    Default

    It sounds to me like the brush loft is set to high for how you would like to lather. Loft is how high the tips of the bristles or hairs are above the top of the handle. The deeper the knot is set the lower the loft and the stiffer the brush, also expressed as backbone. I face lather and like brushes to have a lot of backbone. Depending on what the handle is made from it may not be a big deal to reset it. I feel your pain on shipping but it is a factor of my life that cannot be avoided.
    joelkerr likes this.
    It's not what you know, it's who you take fishing!

  6. #5
    Senior Member criswilson10's Avatar
    Join Date
    May 2014
    Location
    Easley, SC, USA
    Posts
    1,861
    Thanked: 480

    Default

    Floppy brushes can take some time to learn. I don't soak mine, I just dampen the tip and swirl lightly on the soap.

    You should be able to find a VDH (van der Hagen) in the local drug stores for less than $20. The boar brush in the set is usually pretty good after you break it in.
    Some people never go crazy. What truly horrible lives they must lead - Charles Bukowski

  7. #6
    Member
    Join Date
    May 2014
    Location
    Israel
    Posts
    80
    Thanked: 7

    Default

    I have a similar problem... The lather in the bawl is good, and on the first pass it transfers to my face rich and thick.. But from the second pass - I get this thin, weak lather that dries off in 2 minutes... Frustrating, really...

  8. #7
    I used Nakayamas for my house mainaman's Avatar
    Join Date
    Aug 2009
    Location
    Des Moines
    Posts
    8,664
    Thanked: 2591
    Blog Entries
    1

    Default

    Typical loft to knot size ratio is 2:1, so your knot should have been set at 44 mm tops. That being said, the knot quality matters in production of lather.
    Your knot could very well be not stuffed enough to pick up enough soap to lather well and produce enough lather for 3 passes. What brand is your brush?
    Stefan

  9. #8
    I used Nakayamas for my house mainaman's Avatar
    Join Date
    Aug 2009
    Location
    Des Moines
    Posts
    8,664
    Thanked: 2591
    Blog Entries
    1

    Default

    Quote Originally Posted by Haim View Post
    I have a similar problem... The lather in the bawl is good, and on the first pass it transfers to my face rich and thick.. But from the second pass - I get this thin, weak lather that dries off in 2 minutes... Frustrating, really...
    You may have issues with the soap, what are you using?
    Stefan

  10. #9
    Senior Member Mafuzul's Avatar
    Join Date
    Jul 2014
    Location
    Clearwater, FL
    Posts
    233
    Thanked: 31

    Default

    I to had the toughest time building a good lather. I thought I'd never get it right. I have a boar and boy it take a long time for that bit*h to break in. but all is good now. at first it seemed I was not using enough water no matter how much I tried to keep it all on there and now I can't shake off enough. suds everywhere baby!
    joelkerr likes this.
    "Everybody owes, everybody pays. Because that's how you stand up against the rising of the tide."

  11. #10
    Senior Member quicksilver's Avatar
    Join Date
    Jun 2012
    Location
    Salt Lake City, Utah
    Posts
    225
    Thanked: 24

    Default

    Here's a good video to watch by geo. Had similar questions to yours and this helped me a lot.
    boshave and joelkerr like this.

  12. The Following User Says Thank You to quicksilver For This Useful Post:

    Lemy (07-02-2016)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •