Page 1 of 3 123 LastLast
Results 1 to 10 of 26
Like Tree20Likes

Thread: Question after first attempt

  1. #1
    Junior Member
    Join Date
    Mar 2015
    Location
    San Francisco, CA
    Posts
    19
    Thanked: 2

    Default Question after first attempt

    Okay folks, this morning I had my first go at using a straight razor (this is after using DEs since later last year). I got a "sight unseen" razor from Larry at Whipped Dog, which is meant to be shave ready and even includes a note advising not to strop it before the first shave. All I did was wipe off the oil he had coated the blade with, using some tissue.

    However, I'm a bit confused. I lathered up some CRSW Select, got it to what seemed like a nice slick point, then got going on my right cheek. Obviously it's a bit awkward at first figuring out angle and such. But the razor TUGGED. The friction surprised me; with a DE this sort of tugging or chattering tells me either the blade is dull or the lather isn't slick. But when I switched over to my DE for other parts of my face, the glide was just fine.

    Oh, I should mention too that I had had a very close shave the day before, so this morning the growth was pretty minimal.

    My first thought is that the razor just isn't sharp, but that would surprise me given Larry has a good reputation. Was I doing something wrong? Does SR shaving take significantly more cutting-direction force than DEs? I can't imagine that tugging feeling is normal.

    For what it's worth, I didn't cut myself nor did I have any irritation or real alum sting, so at least there's that. But what's going on here?
    PatrickA51 likes this.

  2. #2
    Senior Member blabbermouth
    Join Date
    Jun 2013
    Location
    Pompano Beach, FL
    Posts
    4,014
    Thanked: 631

    Default

    It could go either way. Being new it could be lack of experience. Larry is a good honest person. Try contacting him first. It is possible the razor was not quite ready. Not by intent but by accident. We all have gotten interrupted and missed a step. It may just need a good strop. I am positive he will work with you. Good luck.
    PatrickA51 likes this.

  3. The Following User Says Thank You to bouschie For This Useful Post:

    PatrickA51 (03-12-2015)

  4. #3
    Senior Member Dzanda's Avatar
    Join Date
    Sep 2013
    Location
    Southeastern Virginia, USA
    Posts
    706
    Thanked: 155

    Default

    One thing that will cause a straight to "chatter" is too high a blade angle. Even a super sharp blade may not glide with too high an angle of attack.

    Try lowering the spine so that the razor is nearly flat against your skin; you'll probably find that the best angle is somewhere between almost flat and about 1 1/2 spine widths off the skin.

    Good luck!
    BobH and PatrickA51 like this.
    When you are dead, you don't know that you are dead. It's difficult only for the others.
    It's the same when you are stupid.

  5. #4
    Senior Member feltspanky's Avatar
    Join Date
    Jul 2014
    Location
    Kentucky
    Posts
    707
    Thanked: 92

    Default

    Will the razor "pop, cut leg or arm hair at mid length". If the answer is no it may need some laps on the leather. These videos may help your shaving technique.

    http://youtu.be/

    http://youtu.be/r24ar_SSGVo

    http://youtu.be/XIM0Coix6Gg

  6. The Following User Says Thank You to feltspanky For This Useful Post:

    PatrickA51 (03-12-2015)

  7. #5
    Senior Member PatrickA51's Avatar
    Join Date
    Mar 2015
    Location
    So.San Diego County,CA. aka Mexifornia
    Posts
    283
    Thanked: 12

    Default

    Quote Originally Posted by feltspanky View Post
    Will the razor "pop, cut leg or arm hair at mid length". If the answer is no it may need some laps on the leather. These videos may help your shaving technique.

    http://youtu.be/

    http://youtu.be/r24ar_SSGVo

    http://youtu.be/XIM0Coix6Gg
    Thank You for posting these links. I use a DE razor daily and am going to switch over to a straight razor. My Uncle taught me how to shave with a Straight Razor when I was 16 or 17, before I went in the service, but I have not used one in many years. When my Aunt died, when we were cleaning out her house I got my Uncles Straight Razors.
    feltspanky likes this.
    Remember "Without Trucks and Truck Drivers" America Stops !
    "Once a Marine Always a Marine" "Semper Fi"
    --... ...-- / -.. . / .-- -.... .--. . .-

  8. #6
    Junior Member
    Join Date
    Mar 2015
    Location
    San Francisco, CA
    Posts
    19
    Thanked: 2

    Default

    Quote Originally Posted by Dzanda View Post
    One thing that will cause a straight to "chatter" is too high a blade angle. Even a super sharp blade may not glide with too high an angle of attack.

    Try lowering the spine so that the razor is nearly flat against your skin; you'll probably find that the best angle is somewhere between almost flat and about 1 1/2 spine widths off the skin.

    Good luck!
    Interesting. If anything I felt like I was erring on the side of a too-shallow angle (spine pretty close to my face), but obviously it was just my first go so I don't really know for sure. But I did try to change the angle a bit and still had the tugging, rough feeling.

    I've emailed Larry as well to see if he has any thoughts. I suppose it's possible that the razor wasn't really shave-ready. It's so tough to gauge when I don't know what it's SUPPOSED to feel like.

  9. #7
    Senior Member blabbermouth edhewitt's Avatar
    Join Date
    May 2013
    Location
    Perth Australia
    Posts
    7,741
    Thanked: 713
    Blog Entries
    1

    Default

    from the reading i have done a good lather for a D/E may be a little dry for straight razor use. also as has been mentioned angle could come into it too. i think one partial shave is possibly a little early to jump to conclusions about equipment.
    Bread and water can so easily become tea and toast

  10. #8
    Junior Member
    Join Date
    Mar 2015
    Location
    San Francisco, CA
    Posts
    19
    Thanked: 2

    Default

    Quote Originally Posted by edhewitt View Post
    from the reading i have done a good lather for a D/E may be a little dry for straight razor use. also as has been mentioned angle could come into it too. i think one partial shave is possibly a little early to jump to conclusions about equipment.
    Agreed; I certainly am not making any assumptions. I was just surprised as I didn't expect that much tugging, roughness, chatter, etc. The good news is that I didn't cut or irritate myself, and using my left hand on my left cheek, while a bit awkward, was nowhere near as bad as I expected, so all of that bodes well.

  11. #9
    Senior Member blabbermouth tcrideshd's Avatar
    Join Date
    Oct 2013
    Location
    Oakland Tn
    Posts
    6,586
    Thanked: 1894

    Default

    No one expects it to be that way ,, but the simple truth is , it's your first go at ,, after a 50 or so shaves it gets to where your blades were better than you thought ,,mi think we all want instant effects , but it seldom happens that way ,, I use a razor now that was one of my first shaves. I thought it was dull, but I use it today with the same edge it had back then ,, time will get you there , good luck. Tc
    “ I,m getting the impression that everyone thinks I have TIME to fix their bikes”

  12. #10
    rhensley rhensley's Avatar
    Join Date
    Sep 2013
    Location
    West TN.
    Posts
    2,155
    Thanked: 243

    Default

    Everyone has a different experience when starting with the straight. I went from 5/8 German to 4/8 German hollow ground and from there to 15/16 Sheffield . I went from actually being afraid o using a wedge to preferring one. just like tcrideshd said in the previous post I went from razors that I considered not very sharp to ha they're extremely sharp. As we learn we get faster at the game and more efficient. and we enjoy the experience more. Don't give up you'll get there. Remember relax and enjoy.

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •