Page 1 of 2 12 LastLast
Results 1 to 10 of 16
Like Tree7Likes

Thread: New Hart Steel razor

  1. #1
    Junior Member
    Join Date
    May 2014
    Location
    North Carolina
    Posts
    5
    Thanked: 0

    Default New Hart Steel razor

    i just received a new hart steel razor; I stropped it but it still was a rough shave. Do I need to keep stropping or should I hone it before using it??

  2. #2
    No that's not me in the picture RoyalCake's Avatar
    Join Date
    May 2013
    Location
    Los Angeles South Bay
    Posts
    1,340
    Thanked: 284

    Default

    Where did you purchase the razor from - was it supposed to be shave ready?
    If so, did you try shaving with it before you stropped?
    I love living in the past...

  3. #3
    MJC
    MJC is offline
    Senior Member MJC's Avatar
    Join Date
    May 2012
    Location
    The Lone Star State
    Posts
    1,710
    Thanked: 382

    Default

    I have a few Harts.
    Not only have they all come in with outstanding edges, they seem to stay shave ready for some time and respond very well to basic care.
    If you are new to shaving there are a lot of ways to make a shave rough.
    Besides the obvious edge issues there is Prep, Stretching (very important) and basic technique.
    If you could fill in the blanks we might be able to help. (how long have you been using a straight, what is your routine, how are you stropping etc.)
    And the Library & Wiki have a wealth of info to digest...
    It's a Marathon, not a sprint, but well worth the time and effort to master..

    Smooth Shaving..
    gssixgun likes this.
    Support Movember!
    Movember https://mobro.co/markcastellana?mc=1
    SRP Team USA https://moteam.co/srp-usa?mc=1

  4. The Following User Says Thank You to MJC For This Useful Post:

    pinklather (08-18-2014)

  5. #4
    Junior Member
    Join Date
    May 2014
    Location
    North Carolina
    Posts
    5
    Thanked: 0

    Default

    I purchased it from classic shaving; I think it was supposed to be shave ready. It was rough before and after stropping. I've been shaving with a Feather replaceable blade straight since May

  6. #5
    Senior Member Druid's Avatar
    Join Date
    Mar 2014
    Location
    Mysterious Adirondacks
    Posts
    773
    Thanked: 136

    Default

    My Hart was absolutely shave ready upon purchase.

  7. #6
    MJC
    MJC is offline
    Senior Member MJC's Avatar
    Join Date
    May 2012
    Location
    The Lone Star State
    Posts
    1,710
    Thanked: 382

    Default

    If you have been shaving with a Feather (SS, RG, DX - Fixed or Folding?) then you have the basics.
    I shave with both, and the Feather Edge is different than the Hart or any conventional straight for that mater.
    For me the trade-off is the Feathers staggering sharpness and ease of maintenance for a more forgiving, "smoother" shave. And this is very YMMV.

    First thing I would suggest is you take a look at the edge with a 10 to 30X loupe.
    A few years ago there were Hart's that had temper/chippy edge issues - Classic Shaving corrected this quickly at the time.
    In fact one of my Hart's is from a friend, who had sent his back to Classic and had it replaced after some edge issues.
    He loaned the replacement to me and I later bought it from him when he moved on to his experimental home made Feather blade holder Titanium shave o matics. (another story)

    After stropping I often try "tree topping" the hair on my arm. Holding the blade parallel to my arm I pass the razor over the top 1/2 to 1/3 of the length of the arm hair. If the top of the blade has clippings, and that works at any point of the blade, I am good to go.

    Lifting the spine off of the strop is probably the #1 new shaver problem along with using the edge as the pivot point in the turn rather than the spine.
    Unlike the Feather, a conventional Straight needs pre and post shave care in order to stay in top form.

    Hope that helps even a little.

    Smooth Shaving...
    Support Movember!
    Movember https://mobro.co/markcastellana?mc=1
    SRP Team USA https://moteam.co/srp-usa?mc=1

  8. #7
    aka shooter74743 ScottGoodman's Avatar
    Join Date
    Sep 2009
    Location
    SE Oklahoma/NE Texas
    Posts
    7,285
    Thanked: 1936
    Blog Entries
    4

    Default

    Ok, if you are asking this question...you don't need to be honing anything right now. I don't mean to insult, but you need to learn to shave first and a veteran shaver KNOWS if a razor is off or not. Learn to shave, then learn to touch up, then learn to hone. Like mentioned above, take your time and enjoy the journey...your face will thank you.

    If you wish, you could mail it to me and I will evaluate the edge and report back to you privately. If it needs a honing, I will hone it, ensure it's to my standards, and get it back to you with a known shave ready edge as all you would do with it is wipe the oil off it and shave. Just cover the return shipping cost.
    Southeastern Oklahoma/Northeastern Texas helper. Please don't hesitate to contact me.
    Thank you and God Bless, Scott

  9. #8
    Junior Member
    Join Date
    May 2014
    Location
    North Carolina
    Posts
    5
    Thanked: 0

    Default

    I bet it's my poor stropping technique---your advice was very helpful

  10. #9
    Senior Member blabbermouth
    Join Date
    Jul 2010
    Location
    Portland, OR
    Posts
    2,697
    Thanked: 830
    Blog Entries
    1

    Default

    Hey Fabe, Can you think of anyplace else where experienced Hart shavers help like this? Including offer of free honing? I've not tasted a quality shavette, but if I ever consider it, I'll need your help. Shooter's been at this long enough to know a good edge. I'd seriously consider taking him up on his offer. Harts are fine razors - liked each I honed & tested. They'll be pretty different from any full hollow - and I'd presume any shavette. The heavy grinds should be rather friendly. You get this edge dialed in, and you'll probably be a pretty happy guy. On stropping, the top of my bald head remembers the date 3/11 for Glen's beginner's tips on stropping. The only way to beat it would be to get w/ an experienced guy & have him watch you strop (on an unhoned blade). The last 3 guys that came to my place were all surprised to find how little pressure is needed. This is especially true on a freshly honed edge - that's when its most fragile. You'll be enjoying Hart goodness soon.

  11. #10
    MJC
    MJC is offline
    Senior Member MJC's Avatar
    Join Date
    May 2012
    Location
    The Lone Star State
    Posts
    1,710
    Thanked: 382

    Default

    Quote Originally Posted by Fabe60 View Post
    I bet it's my poor stropping technique---your advice was very helpful
    And we have all been there at one point in the process - don't beat yourself up.
    As pinklather mentions most are surprised at how low the pressure needs to be when the form is correct.
    This reminds us how quickly we can damage the edge by say dragging the edge on the nylon webbing material used for the fabric of many strops.

    Fortunately unless you have been also using your new Hart as a pry bar, paint scrapper, slim jim or screw driver...it can be brought back to form in short order.

    Take Shooter up on his offer, use your Feather while the Hart is visiting Oklahoma and you will soon be on your way...

    Smooth Shaving is not far away...
    ScottGoodman likes this.
    Support Movember!
    Movember https://mobro.co/markcastellana?mc=1
    SRP Team USA https://moteam.co/srp-usa?mc=1

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •