Page 1 of 2 12 LastLast
Results 1 to 10 of 15
Like Tree11Likes

Thread: Making a paddle strop- Tutorial

  1. #1
    I used Nakayamas for my house mainaman's Avatar
    Join Date
    Aug 2009
    Location
    Des Moines
    Posts
    8,664
    Thanked: 2591
    Blog Entries
    1

    Default Making a paddle strop- Tutorial

    I have been planing to make a new paddle strop for a while now, and today I finally decided to do it. In the process I thought I'd take a few pics and post here for others to try if they want.
    This is not my first paddle strop. I made a similar one before, for it I used Latigo and felt to make it double sided paddle.
    For both strops I used Iwasaki's method of treating the leather to make it as smooth as possible.
    I wanted to make the new strop with horse hide, recently I got a nice big piece of 7oz horsehide from e-bay. I used one of the pieces from it for the paddle today.

    First I got a 3" wide piece of oak from Home depot and cut it to 3 feet length. Please be sure when you buy wood for paddle , that it is flat, wood with bow will not be very useful IMO.

    I cut a handle in the paddle and sanded lightly the surface that will meet the leather with a medium sandpaper sponge. After that I applied contact cement to both the leather(on the rough side) and the paddle:

    Name:  IMG_4118.jpg
Views: 2941
Size:  51.8 KB
    Name:  IMG_4119.jpg
Views: 2733
Size:  58.2 KB

    The leather was wider and longer than the paddle , so I trimmed it to match.

    Name:  IMG_4121.jpg
Views: 2782
Size:  46.2 KB
    Name:  IMG_4124.jpg
Views: 2755
Size:  70.5 KB
    Name:  IMG_4126.jpg
Views: 2673
Size:  34.2 KB

    The leather is untreated so it is not even, to correct this I use sandpaper progression.
    First I scuffed the strop with 400 sandpaper to show how many low spots it has:

    Name:  IMG_4128.jpg
Views: 2872
Size:  51.1 KB

    To speed up the work on flattening the leather I use 150 grit sandpaper first. I use a wood block to wrap the sand paper around to make sure it is flat when sanding the surface of the strop.

    Name:  IMG_4130.jpg
Views: 2760
Size:  49.9 KB
    Last edited by mainaman; 10-10-2011 at 12:19 AM.
    Stefan

  2. #2
    I used Nakayamas for my house mainaman's Avatar
    Join Date
    Aug 2009
    Location
    Des Moines
    Posts
    8,664
    Thanked: 2591
    Blog Entries
    1

    Default

    After the 150 sand paper I continued with 220, 400, 600

    Name:  IMG_4132.jpg
Views: 2698
Size:  49.6 KB
    Name:  IMG_4133.jpg
Views: 2640
Size:  43.2 KB
    Name:  IMG_4134.jpg
Views: 2664
Size:  47.4 KB

    After 600 I go to 800, 1000, 2000 grit.
    Here I use a wet towel on the leather prior to using the sand paper. This allows for less loading of the sand paper. I should have done this starting from 400 grit , but it worked fine this way too.

    800 grit

    Name:  IMG_4137.jpg
Views: 2717
Size:  50.4 KB

    1000 grit

    Name:  IMG_4139.jpg
Views: 2648
Size:  42.1 KB

    2000 grit

    Name:  IMG_4140.jpg
Views: 2701
Size:  51.8 KB

    As you can see this becomes very highly polished leather surface:

    Name:  IMG_4144.jpg
Views: 2673
Size:  27.8 KB

    From the pics it is obvious there is a low spot left that I have to get rid of , but it will not affect the stropping. I have to redo the finish to get the surface smoother, but even like that it will work fine, I just am a bit OCD so I'll redo it soon.

    Maintenance of the paddle.
    After some use there will be metal particles left on the surface of the strop

    Name:  IMG_4146.jpg
Views: 2681
Size:  26.9 KB

    The maintenance is very simple just go back to 1k and 2k sand paper and recondition the surface.

    Here are my two paddle strops:

    Name:  IMG_4145.jpg
Views: 2964
Size:  42.1 KBName:  IMG_4148.jpg
Views: 2700
Size:  40.3 KB

    Those smoothed surfaces produce great edge on a razor, they work extremely well on Kamisori in my experience.

    Hope this is helpful for those that want to make their own paddle strop.
    Last edited by mainaman; 10-10-2011 at 12:18 AM.
    Stefan

  3. The Following 12 Users Say Thank You to mainaman For This Useful Post:

    Adam G. (10-10-2011), adbuett (10-14-2011), baldy (10-10-2011), Euclid440 (08-25-2016), hendersr (10-10-2011), Hirlau (10-29-2011), JoeSomebody (10-16-2011), Naallen12 (01-04-2023), regularjoe (10-16-2011), Str8Raz0r (10-10-2011), tumtatty (10-11-2011), xiaotuzi (01-29-2017)

  4. #3
    50 year str. shaver mrsell63's Avatar
    Join Date
    Aug 2008
    Location
    Pothole County, PA
    Posts
    2,258
    Thanked: 522
    Blog Entries
    2

    Default

    Stefan

    That's a very nice effort on your paddle strops. You must have very long arms. I prefer a shorter strop length.

    Thanks for sharing your good work.

    Nice toenails too!

    Jerry
    ____
    JERRY
    OOOPS! Pass the styptic please.

  5. #4
    Hones & Honing randydance062449's Avatar
    Join Date
    May 2005
    Location
    Saint Paul, Minnesota, United States
    Posts
    7,971
    Thanked: 2202
    Blog Entries
    1

    Default

    Looks like some very nice work.
    Did you find that the sandpaper left any embedded grit in the leather? If so, how did you get it out?
    Randolph Tuttle, a SRP Mentor for residents of Minnesota & western Wisconsin

  6. #5
    I used Nakayamas for my house mainaman's Avatar
    Join Date
    Aug 2009
    Location
    Des Moines
    Posts
    8,664
    Thanked: 2591
    Blog Entries
    1

    Default

    Quote Originally Posted by mrsell63 View Post
    Stefan

    That's a very nice effort on your paddle strops. You must have very long arms. I prefer a shorter strop length.

    Thanks for sharing your good work.

    Nice toenails too!

    Jerry
    ____
    hehe Jerry no, I just did not want to waste the leather.
    Stefan

  7. #6
    I used Nakayamas for my house mainaman's Avatar
    Join Date
    Aug 2009
    Location
    Des Moines
    Posts
    8,664
    Thanked: 2591
    Blog Entries
    1

    Default

    Quote Originally Posted by randydance062449 View Post
    Looks like some very nice work.
    Did you find that the sandpaper left any embedded grit in the leather? If so, how did you get it out?
    Randy, I did not dins any sand paper embedded in the leather.
    Stefan

  8. The Following User Says Thank You to mainaman For This Useful Post:

    skipnord (10-10-2011)

  9. #7
    Senior Member
    Join Date
    Mar 2011
    Location
    Washington DC Metro Area
    Posts
    468
    Thanked: 114

    Default

    Thanks for sharing this. I've sanded out leather nicks with 400 grit before, but it never occured to me that leather could be polished up so nicely by apply further grits. This post has inspired me to go back and redo some old repaired strops and possibly polish a few to experiment with draw characteristics. Thanks again.

  10. #8
    Senior Member
    Join Date
    Mar 2011
    Location
    Washington DC Metro Area
    Posts
    468
    Thanked: 114

    Default

    My 9 year old daughter asked me again this morning if we can “do razors” – I’m very lucky that she likes to tinker with Dad in the garage. So I let her remove a few light nicks in my SRD Premium 1. She started with 400 grit sandpaper to remove the nicks and then progressed through the grits all the way through 2000. Then she used the micromesh and worked all the way through 12000. To blend everything smooth, I let her condition the entire strop with the micromesh, not just the repaired areas. The result is a functionally brand new strop! Thanks for the inspiration Mainaman (and thanks for the fun project idea for my daughter – she had a blast).
    kwlfca likes this.

  11. #9
    I used Nakayamas for my house mainaman's Avatar
    Join Date
    Aug 2009
    Location
    Des Moines
    Posts
    8,664
    Thanked: 2591
    Blog Entries
    1

    Default

    Quote Originally Posted by diyguy View Post
    My 9 year old daughter asked me again this morning if we can “do razors” – I’m very lucky that she likes to tinker with Dad in the garage. So I let her remove a few light nicks in my SRD Premium 1. She started with 400 grit sandpaper to remove the nicks and then progressed through the grits all the way through 2000. Then she used the micromesh and worked all the way through 12000. To blend everything smooth, I let her condition the entire strop with the micromesh, not just the repaired areas. The result is a functionally brand new strop! Thanks for the inspiration Mainaman (and thanks for the fun project idea for my daughter – she had a blast).
    Glad you found my tutorial useful.
    Stefan

  12. #10
    zib
    zib is offline
    Hell Razor zib's Avatar
    Join Date
    Nov 2008
    Location
    Jacksonville, Fl.
    Posts
    5,348
    Thanked: 1217
    Blog Entries
    4

    Default

    Nice Job Stefan, Kind of short though...Ha....!
    We have assumed control !

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •