Page 1 of 3 123 LastLast
Results 1 to 10 of 24
Like Tree70Likes

Thread: Early Harwood & Co.

  1. #1
    Senior Member karlej's Avatar
    Join Date
    Oct 2011
    Location
    Standish, Maine
    Posts
    816
    Thanked: 952

    Default Early Harwood & Co.

    The owner was looking for an early blade to add to his everyday rotation. The blade had lots of active rust to remove and removing the surface rust revealed some significant pitting on both blade faces and the spine. It was decided to restore the blade to its original crocus finish. The scales were broken at the wedge end through the pin with pieces missing. Honey horn seemed an appropriate replacement. These are copies. I managed to save the original steel collar which were also corroded. I had to make a jig to hold them while I cleaned them up. They were very thin and fragile. The razor is pinned with brass as the original. Although I find these early blades a little awkward to hold on to this 6/8 wedge blade provided a comfortable shaving experience.
    I have no information on Harwood & Co. and I'm hoping Scienceguy will chime in with some information.
    The honey horn is nice and clear and anything that looks like delamination are just reflections from my poor photography.
    Name:  P1040573.jpg
Views: 560
Size:  75.6 KBName:  P1040577.jpg
Views: 621
Size:  76.7 KBName:  P1040594.jpg
Views: 610
Size:  35.9 KBName:  P1040597.jpg
Views: 590
Size:  33.6 KBName:  P1040596.jpg
Views: 526
Size:  20.2 KBName:  P1040595.jpg
Views: 597
Size:  34.2 KBName:  P1040599a.jpg
Views: 632
Size:  43.5 KB

  2. The Following 4 Users Say Thank You to karlej For This Useful Post:

    cheetahmeatpheonix (05-10-2016), Nightblade (02-18-2017), nipper (05-05-2016), sharptonn (05-05-2016)

  3. #2
    Moderator rolodave's Avatar
    Join Date
    Aug 2011
    Location
    Racine, WI USA
    Posts
    7,531
    Thanked: 1927
    Blog Entries
    1

    Default

    Well done.

    Great looking stub tail
    karlej likes this.
    If you don't care where you are, you are not lost.

  4. #3
    Senior Member blabbermouth
    Join Date
    Mar 2012
    Location
    Thunder Bay, Ontario, Canada
    Posts
    17,250
    Thanked: 3221

    Default

    Saw that one on the bay and wondered what it would look like after restoring. Great looking resto, thanks for posting.

    Bob
    Life is a terminal illness in the end

  5. #4
    Senior Member blabbermouth Leatherstockiings's Avatar
    Join Date
    Apr 2013
    Location
    Rural Missouri
    Posts
    4,981
    Thanked: 972

    Default

    It's a good looking razor. Excellent restore job.
    karlej likes this.

  6. #5
    Junior Member
    Join Date
    Apr 2016
    Location
    South Carolina
    Posts
    16
    Thanked: 1

    Default

    Karlej,

    It is amazing that you were able to take that razor from its original state into a like new condition.

    Very nicely done!

    I was able to find the below text online, which you may have seen already, but figured I would post it just in case. It is a small poriton of a document on the origins of Safety Razors. I have included the link to the original article below the text:

    "Razor Guards and Guard Razors

    According to research by Thorsten Sjölin, in July of 1799 a friedlische Rasiermesser (peaceful or pacific razor) was illustrated in a German trade journal and said to be a new idea from England. The razor was manufactured by Harwood & Co. in England and sold by Johann Christoph Roder in Leipzig, Germany. It was offered in a green-velvet-lined box together with a pair of leather strops, one black and one red, with the box fitted into a red leather case."


    Link to document: From Perret to Kampfe: Origins of the Safety Razor

    It doesn't really provide much info other than to illustrate that Harwood & Co. was likely an English manufacturer making razors as early as July 1799.

    I'll say it again. Very nicely done!!!

    And thanks for sharing
    sharptonn and karlej like this.

  7. The Following User Says Thank You to eroman99 For This Useful Post:

    karlej (05-05-2016)

  8. #6
    Razor Vulture sharptonn's Avatar
    Join Date
    Oct 2010
    Location
    Lone Star State
    Posts
    25,828
    Thanked: 8588

    Default

    Really looks choice, Karl!
    karlej likes this.
    "Don't be stubborn. You are missing out".
    I rest my case.

  9. #7
    Senior Member ScienceGuy's Avatar
    Join Date
    Sep 2011
    Posts
    1,650
    Thanked: 1341

    Default

    The Universal British Directory (long name The Universal British directory of trade, commerce, and manufacture comprehending lists of the inhabitants of London, Westminster, and borough of Southwark), Vol. 4, published between 1795-8, lists Harwood & Co. as Sheffield cutlers.

    The Universal British directory of trade, commerce, and manufacture comprehending lists of the inhabitants of London, Westminster, and borough of Southwark - Europeana

    Name:  Screen Shot 2016-05-05 at 10.28.14 AM.jpg
Views: 491
Size:  32.0 KB

  10. The Following 2 Users Say Thank You to ScienceGuy For This Useful Post:

    karlej (05-05-2016), WW243 (05-05-2016)

  11. #8
    Member ajsaxs's Avatar
    Join Date
    Nov 2008
    Posts
    94
    Thanked: 21

    Default

    Very nice job.
    Great save.
    karlej likes this.

  12. #9
    Senior Member
    Join Date
    Jan 2009
    Location
    Michigan
    Posts
    178
    Thanked: 45

    Default

    I'm going to go against the grain on this. I believe you did a great job but I don't think these early razors should be restored in this way. I've done it myself on one razor and I regretted it. The original scales could have been repaired and I think it's important to keep as much intact as possible. A 200 year old razor is usually going to show some signs of age and that's the fascinating part, signs of it's history. By buffing away the well earned patina, the history has been erased.

  13. The Following User Says Thank You to mattluthier For This Useful Post:

    JimmyHAD (05-05-2016)

  14. #10
    Senior Member karlej's Avatar
    Join Date
    Oct 2011
    Location
    Standish, Maine
    Posts
    816
    Thanked: 952

    Default

    Quote Originally Posted by mattluthier View Post
    I'm going to go against the grain on this. I believe you did a great job but I don't think these early razors should be restored in this way. I've done it myself on one razor and I regretted it. The original scales could have been repaired and I think it's important to keep as much intact as possible. A 200 year old razor is usually going to show some signs of age and that's the fascinating part, signs of it's history. By buffing away the well earned patina, the history has been erased.
    You are not against the grain at all. I'm sure there a many collectors that feel the same way. Scienceguy probably raised an eyebrow. There are certainly fewer of these old razors out there than the say 1850+ blades. The razor was wanted as an everyday shaver and leaving it as is was not an option for that purpose. A minimal restore would have left a blade with many deep pits and at that point not original anymore. Some folks like to shave with razors like that because they have left some character on the blade and some do not like that. All serious considerations when restoring any of the 19th century blades. Each must decide for themselves.
    I new it would be controversial to post it. The conversation frequently comes up when restoring the old blades. How much is too much? Well some would say any.

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •